expired Posted by KingL7335 • Nov 25, 2020
Nov 25, 2020 11:34 PM
Item 1 of 1
expired Posted by KingL7335 • Nov 25, 2020
Nov 25, 2020 11:34 PM
Bird ES4-800 Dual Battery 8-Mile Range 800-Watt Motor Electric Scooter (Renewed)
+ Free S&H$199
$799
75% offWalmart
Visit WalmartGood Deal
Bad Deal
Save
Share
Leave a Comment
Top Comments
1,695 Comments
Sign up for a Slickdeals account to remove this ad.
Did you also try changing your serial number with Ninebot Flasher? That's another way of derestricting the speed.
No, haven't tried changing SN yet.
Nothing working there so far.
---
For those taking count, I bought 2. Both have flashing Bluetooth. When I connect with the official or third party apps via Android, the scooter beeps and Bluetooth logo becomes solid. Locked in Sport mode, 15.5 mph/25 km/h, can't flash firmware like everyone.
For those without Bluetooth, you're not missing too much.
So far, Bluetooth features:
-Lock/unlock the scooter. Locking just makes it so gas pedal doesn't work and the electronic brake is applied when you try to roll the scooter manually. It makes a relatively quiet beep if you try to roll it. Would fail as a deterrent in my opinion. Also comically, you cannot turn off the scooter while it is locked, so you have the flashing RGB LEDs on the undercarriage continuously going while it's locked.
-Modify regen: low (default)/med/high. This is how much the scooter applies electronic braking when you're cruising without pressing gas or brakes.
-Cruise control: on/off. If on, if you hold the gas for 5 seconds straight while riding, the scooter will beep and then keep the gas on without needing to press gas until you brake.
-Through 3rd party app m365 tools:
---Turn on/off tail light. This allows you to make it so the tail light isn't always on, instead it's only on when brakes are applied. Personally I'd keep it on.
---Modify the undercarriage LED lighting
-Through 3rd party app Nine Dash: Can change scooter display to mph or km/h.
-There is no ability to change speed, sport mode, or
undercarriage LEDsso far.Does the regen setting also change the braking performance? The brake seems very mushy/light on mine. It's a very gradual slow down as opposed to an actual brake?
Did you also try changing your serial number with Ninebot Flasher? That's another way of derestricting the speed.
Does the regen setting also change the braking performance? The brake seems very mushy/light on mine. It's a very gradual slow down as opposed to an actual brake?
Edit 1 - You can change the board/deck lights using the M365 tools app.
Edit 2 - You can use the Nine Dash app to change from km/h to mph (I haven't personally done this, but some users have had success with it, there should be a setting somewhere in that app)
Sign up for a Slickdeals account to remove this ad.
Did you also try changing your serial number with Ninebot Flasher? That's another way of derestricting the speed.
Since the bluetooth module in the scooter definately works, I think it's a software lock and the reason some are able to connect via bluetooth is that those scooters have different firmware that allows a bluetooth connection.
No, haven't tried changing SN yet.
Sign up for a Slickdeals account to remove this ad.
Tried pressing/holding the button and doesn't light up anything ... The app shows I have 2 batteries though. The red lights on the external battery light up too when the headlight is on.
It doesn't really matter to me as long as that external battery is actually working. I'm charging it to 100% right now and I'm going to track how many miles I will get on a full charge. Hopefully, it's close to 28miles and that will tell me that both batteries are working fine.
Leave a Comment