Inovelli has select
Inovelli Black Series Smart Switches (Z-Wave) for the prices listed below. Shipping is a flat rate $8 or free on orders of $100+.
Thanks to community member
jsterjay for finding this deal.
Available (use drop-down menu to select color):
Features:- Echnology: Z-Wave Plus, S2 Encryption, SmartStart
- Z-Wave Chip: 500 Series
- 3-Way, 4-Way (Multi-Switch) Compatibility: Works with a dumb (existing) on/off switch (no dimming), auxiliary switch (GE or HomeSeer), or another Inovelli smart switch (via Z-Wave Association)
- Disable Internal Relay: Tap 8x on the config button to disable the internal relay
- Change Parameters Locally: Change parameters directly from the switch without the need for a Hub
- Accessories Included: White Faceplates/Paddles and a Neutral Wire Jumper (Almond not included)
No longer available:
Leave a Comment
Top Comments
but if you dont want the smart functionality, you can still use it as a dumb switch without any hub.
105 Comments
Sign up for a Slickdeals account to remove this ad.
Dimming Speed: How fast or slow the light turns on (or dims) when you hold the switch (ie: dimming from 10-20%, 80-60%, etc)
Dimming Speed (Z-Wave): How fast or slow the light turns on (or dims) when you adjust the switch remotely (ie: dimming from 10-20%, 80-60%, etc)
Ramp Rate: How fast or slow the light turns on when you press the switch 1x to bring from On to Off or Off to On
Ramp Rate (Z-Wave): How fast or slow the light turns on when you bring your switch from On to Off or Off to On remotely
Minimum Dim Level: Minimum level the light switch will dim to
Maximum Dim Level: Maximum level the switch will dim to
Nathan
CSO | Inovelli
Sign up for a Slickdeals account to remove this ad.
I might be interested in the black on/off series to replace some dimmers because I want to use some hue colored bulbs and dimmer switches are no good. I've not yet found a great way to use hue colored bulbs with existing switches. Can these black on/off be programmed from the paddle to not actually turn on/off but send some kind of signal that I could program home-assistant to intercept and convert to a huge on/off signal instead? I am still trying to find the best solution for using hue bulbs on existing switches. The on/off switches turn hue bulbs on/off back to white but sometimes you can get into a situation where you just want to turn the bulbs to a color but then have to go turn the bulb on from the switch first. It is an annoying two step process. Maybe a better way would be to see if home-assistant can be programmed to initiate an "on" to the switch whenever the colors are adjusted.
Sign up for a Slickdeals account to remove this ad.
Leave a Comment