Did this coupon
work for you?
work for you?
Forum Thread
GEEETECH 1.75mm PLA 3D Printer Filament, 1kg - Black $17.69
$17.69
Clip Coupon for 18% off and add Subscribe & Save for additional %5 off
About this item
✔️【Upgrade Tidy Winding】– Always maintain a smooth feeding during printing, no entanglement, effectively reduce unexpected printing interruptions.
✔️【High Quality & Toughness】Geeetech premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness.
✔️【1kg (2.2lbs) Spool】– Spool size: Φ200mm/7.9" flange, Φ56mm/2.2" hub hole, 64mm/2.5" width. Filament dimensional accuracy 1.75 +/- 0.03mm. A wide range of compatibility.
✔️【Vacuum Packing】– Vacuum sealed with desiccant to maintain low level of moisture content. And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle.Note: an extra sealed bag is offered to store filament.
✔️【Easy-to-Use, Clog-Free, Bubble-Free】– Recommended extrusion/nozzle temperature 185°C - 215°C (365°F - 419°F), hot bed 25°C - 60°C (77℉~ 140℉) . Works perfectly with all common 1.75mm FDM 3D printers.
https://smile.amazon.co
About this item
✔️【Upgrade Tidy Winding】– Always maintain a smooth feeding during printing, no entanglement, effectively reduce unexpected printing interruptions.
✔️【High Quality & Toughness】Geeetech premium PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness.
✔️【1kg (2.2lbs) Spool】– Spool size: Φ200mm/7.9" flange, Φ56mm/2.2" hub hole, 64mm/2.5" width. Filament dimensional accuracy 1.75 +/- 0.03mm. A wide range of compatibility.
✔️【Vacuum Packing】– Vacuum sealed with desiccant to maintain low level of moisture content. And please keep it dry and dust-free after after opening the sealed package to prevent it becomes brittle or jams the nozzle.Note: an extra sealed bag is offered to store filament.
✔️【Easy-to-Use, Clog-Free, Bubble-Free】– Recommended extrusion/nozzle temperature 185°C - 215°C (365°F - 419°F), hot bed 25°C - 60°C (77℉~ 140℉) . Works perfectly with all common 1.75mm FDM 3D printers.
https://smile.amazon.co
Created 04-18-2021
at 11:42 PM
by tkreimark91
If you purchase something through a post on our site, Slickdeals may get a small share of the sale.
Don't have Amazon Prime? Students can get a free 6-Month Amazon Prime trial with free 2-day shipping, unlimited video streaming & more.
If you're not a student, there's also a free 1-Month Amazon Prime trial available.
You can also earn cash back rewards on Amazon and Whole Foods purchases with the Amazon Prime Visa credit card. Read our review to see if it’s the right card for you.
Recommended Deal Alerts For You
What are Deal Alerts?
Want more deals like this?
Create a deal alert for Tech & Electronics.
Add Deal Alert for Tech & Electronics
More Tech & Electronics Deals & Discounts
View AllFrontpage
Frontpage
$6.45
w/ Subscribe & Save
45
43
Frontpage
Frontpage
$360
(In-Store Only, Limited Locations)
166
464
Frontpage
$299
(In-Store Only, Select Locations)
77
123
13 Comments
Your comment cannot be blank.
Sign up for a Slickdeals account to remove this ad.
Try this instead, I got my first spool last week and have been very happy with the quality so far:
augtarlion 3D Printer Filament Tangle-Free PLA Filament 1.75 mm Dimensional Tolerance 0.03 mm, 2.2 lbs Spool Compatible with Most FDM 3D Printer (Black) https://smile.amazon.co
SD wouldn't let me post this because it hasn't been reviewed yet, but at $9.50 (20% coupon on page), it was a no brainer. I was very pleased with my first few prints on it (pictures posted on my Amazon review), and I've bought 5 more spools since then. (Plate at 60°C and extruder set to 200°)
Try this instead, I got my first spool last week and have been very happy with the quality so far:
augtarlion 3D Printer Filament Tangle-Free PLA Filament 1.75 mm Dimensional Tolerance 0.03 mm, 2.2 lbs Spool Compatible with Most FDM 3D Printer (Black) https://smile.amazon.co
SD wouldn't let me post this because it hasn't been reviewed yet, but at $9.50 (20% coupon on page), it was a no brainer. I was very pleased with my first few prints on it (pictures posted on my Amazon review), and I've bought 5 more spools since then. (Plate at 60°C and extruder set to 200°)
Nice, At under $10 it's a no brainer
It will also let you use the coupon multiple times if you check out in multiples of 1
Try this instead, I got my first spool last week and have been very happy with the quality so far:
augtarlion 3D Printer Filament Tangle-Free PLA Filament 1.75 mm Dimensional Tolerance 0.03 mm, 2.2 lbs Spool Compatible with Most FDM 3D Printer (Black) https://smile.amazon.co
SD wouldn't let me post this because it hasn't been reviewed yet, but at $9.50 (20% coupon on page), it was a no brainer. I was very pleased with my first few prints on it (pictures posted on my Amazon review), and I've bought 5 more spools since then. (Plate at 60°C and extruder set to 200°)
None whatsoever. Have you tried fiddling around with your retraction and travel speed? I used to have issues with other filaments but then loaded a pre-made profile into Cura that I found by googling for my Ender 3 v2 that solved the problem.
I have, however, struggled a bit more with bed adhesion with this filament. But it could be just my own fault with poor bed leveling.
I have, however, struggled a bit more with bed adhesion with this filament. But it could be just my own fault with poor bed leveling.
Thanks.
Sign up for a Slickdeals account to remove this ad.
Try this instead, I got my first spool last week and have been very happy with the quality so far:
augtarlion 3D Printer Filament Tangle-Free PLA Filament 1.75 mm Dimensional Tolerance 0.03 mm, 2.2 lbs Spool Compatible with Most FDM 3D Printer (Black) https://smile.amazon.co
SD wouldn't let me post this because it hasn't been reviewed yet, but at $9.50 (20% coupon on page), it was a no brainer. I was very pleased with my first few prints on it (pictures posted on my Amazon review), and I've bought 5 more spools since then. (Plate at 60°C and extruder set to 200°)
I have, however, struggled a bit more with bed adhesion with this filament. But it could be just my own fault with poor bed leveling.
Try this instead, I got my first spool last week and have been very happy with the quality so far:
augtarlion 3D Printer Filament Tangle-Free PLA Filament 1.75 mm Dimensional Tolerance 0.03 mm, 2.2 lbs Spool Compatible with Most FDM 3D Printer (Black) https://smile.amazon.co
SD wouldn't let me post this because it hasn't been reviewed yet, but at $9.50 (20% coupon on page), it was a no brainer. I was very pleased with my first few prints on it (pictures posted on my Amazon review), and I've bought 5 more spools since then. (Plate at 60°C and extruder set to 200°)
Bought some of this and printing with it right now. Seems to be working great.