Original Post
Written by
Edited May 26, 2021
at 09:52 AM
by
I've been eyeing this garage door for awhile and it's finally on sale. Normally $245, now 20% off for $195 with free shipping or free store pick up. This garage door is CA compliant since it has a backup battery.
I also got the professional installation for an additional $87. Also not a bad deal considering quotes I got from contractors were $150 to $200 just for install.
https://www.homedepot.com/p/Chamb...67#overlay
Amazon also has the same garage door for the same price
https://www.amazon.com/dp/B075CQ86ZV/ Expired
Others are reporting you can purchase installation only through this link:
https://www.homedepot.com/c/cost_install_repair_garage_doors_openers?cm_mmc=hsem-cg-faq [homedepot.com]
HD contracts out to 3rd party installers. The installation includes:
Installation Process
After your order has been confirmed, one of our professionals will call you within two business day to schedule a date and time for installation.
*Pricing subject to change due to increased scope of work or required code regulations
Price Includes
Removing and hauling away old garage door opener
Installing new customer supplied garage door opener
Installing new motion sensors
Testing new garage door opener and cleaning up debris
Price includes install for Garage Doors up to 8 ft. tall
I ordered on 21st, shipped & delivered on 22nd and installed today!
302 Comments
Your comment cannot be blank.
Featured Comments
Sign up for a Slickdeals account to remove this ad.
Your kitchen, and appliances also have a lot of safety requirements.
Your stairs got handrails? Are the steps all the same size?
Smokers have higher health insurance rates.
I'm not an installer nor have any opinion on specific models or anything, but he does bring up a good point. Just because an opener is belt drive doesn't mean it's going to be as quiet as it could be. My garage has 2 doors (thus openers). Both are belt drive. Same brand but different models. One is way quieter than the other due to the motors.
Anyone having problems syncing their B970 to their vehicles with HomeLink? Everything else appears to be working but for the life of me, I can't get it to sync to either of our vehicles. I've read some cars require a bridge but is not needed according to the website (bridge.chamberlain.com). Both vehicles also sync fine to the old Chamberlain on my other garage door (same model), so it's not the vehicles. Saw a bunch of youtube videos to make sure procedure was done correctly, but no joy. My next move would be to reach out to customer service but thought I would check here if anyone is having the same problem or were you successful.
Each one has two motion-sensing lights. It's great to walk into the garage and have your lights come on.
The "hold open" feature is great. You can set the door to auto-close after 1, 5, or 10 minutes. The timer will reset if it senses you backing out.
It's really easy to pair new openers (keypads, homelink in the car, etc) and you can do it right from the control panel. No climbing up to the motor to press the pair button!
The keypads it comes with work great. Everything is super intuitive.
Really recommend these.
My garage door just broke and the local garage repair guy quoted me $600 for a new liftmaster.
This deal with the $87 installation saved me over half. i LOVE SD.
Sign up for a Slickdeals account to remove this ad.
Confirmed, it does not. Install manual also say to use only incandescent or CFL bulbs, no LED or halogen.
My garage door just broke and the local garage repair guy quoted me $600 for a new liftmaster.
This deal with the $87 installation saved me over half. i LOVE SD.
Same here !
Sign up for a Slickdeals account to remove this ad.