Model: Karcher Surface Cleaner 15-in 3200 PSI Rotating Surface Cleaner for Gas and Electric Pressure Washers in Black | 8.641-035.0
Deal History
Deal History includes data from multiple reputable stores, such as Best Buy, Target, and Walmart. The lowest price among stores for a given day is selected as the "Sale Price".
Sale Price does not include sale prices at Amazon unless a deal was posted by a community member.
For what it's worth, I've used this once a year for 4 years on my concrete patio and wrap around walkway and it's perfect. The metal and brass components make all the difference compared to cheaper alternatives, in my opinion. I'm using a WEN Gas powered pressure washer.
Bought one last time on sale. Works wonders. Walkway and patio look brand new. It puts out a lot of water though depending on your washer's PSI. Can lift off the ground if you're not paying attention
Anyone ever use this for an asphalt driveway? I seal mine every year because it starts to look faded, but the Latex-Ite I use claims it protects for 8-10 years depending on which one I buy.
I feel like it isn't meant for that, but can anyone attest otherwise before I buy it?
Anyone ever use this for an asphalt driveway? I seal mine every year because it starts to look faded, but the Latex-Ite I use claims it protects for 8-10 years depending on which one I buy.
I feel like it isn't meant for that, but can anyone attest otherwise before I buy it?
My understanding is that you can use this carefully on asphalt, but if you have it seal-coated, you should reseal after.
For my own driveway, which is sealed, I would only do this before I did my ~5yr reseal.
I would not use this on Trex decking. I just use warm water, soap, deck brush and rinse with garden hose. Below is guidelines straight from Trex website.
DIRT AND DEBRIS
The affected area should be sprayed off with a hose to remove surface debris. Use warm soapy water and a soft bristle brush to remove dirt and debris from the embossing pattern.
USING A PRESSURE WASHER (GENERAL CLEANING ISSUES)
A pressure washer with no greater than 3100 psi** that has a fan attachment/adjustment and soap dispenser may be used to remove dirt or mud. Spray deck with soap, then follow by gently scrubbing each deck board with a soft bristle brush. Spray/rinse each individual deck board using a fan tip no closer than 8-in (203 mm) from the decking surface. RINSE THOROUGHLY. If dirty water from cleaning is left to dry, a film will remain on the decking surface.
20 Comments
Your comment cannot be blank.
Sign up for a Slickdeals account to remove this ad.
https://slickdeals.net/f/15151426-amazon-com-karcher-15-inch-pressure-washer-surface-cleaner-attachment-3200-psi-rating-garden-outdoor-39-22
https://slickdeals.net/f/15151426-amazon-com-karcher-15-inch-pressure-washer-surface-cleaner-attachment-3200-psi-rating-garden-outdoor-39-22
I don't think so.... your link appears to be the re-post.
This one..... Created Yesterday at 02:11 PM by state808... but changes to 04:11 PM after logging in... adjusting for time zone of vpn.
Your link.....Created Yesterday at 03:43 PM by JasoNB2773... but changes to 05:43 PM after logging in... adjusting for time zone of vpn.
Sign up for a Slickdeals account to remove this ad.
https://slickdeals.net/f/15151426-amazon-com-karcher-15-inch-pressure-washer-surface-cleaner-attachment-3200-psi-rating-garden-outdoor-39-22
I think it is out of stock at Amazon now, at least at that price. So, I wouldn't say it is a repost.
I feel like it isn't meant for that, but can anyone attest otherwise before I buy it?
Id suggest an extension wand to go with it to save your back though.
I feel like it isn't meant for that, but can anyone attest otherwise before I buy it?
For my own driveway, which is sealed, I would only do this before I did my ~5yr reseal.
I would not use this on Trex decking. I just use warm water, soap, deck brush and rinse with garden hose. Below is guidelines straight from Trex website.
DIRT AND DEBRIS
The affected area should be sprayed off with a hose to remove surface debris. Use warm soapy water and a soft bristle brush to remove dirt and debris from the embossing pattern.
USING A PRESSURE WASHER (GENERAL CLEANING ISSUES)
A pressure washer with no greater than 3100 psi** that has a fan attachment/adjustment and soap dispenser may be used to remove dirt or mud. Spray deck with soap, then follow by gently scrubbing each deck board with a soft bristle brush. Spray/rinse each individual deck board using a fan tip no closer than 8-in (203 mm) from the decking surface. RINSE THOROUGHLY. If dirty water from cleaning is left to dry, a film will remain on the decking surface.