Original Post
Written by
Edited October 30, 2021
at 06:03 AM
by
I've been eyeing this for a while because of its compact form factor, and it's finally back on sale for $1299.00 after $200 off.
I realize it has been at this price before, but the next best price by other merchants is $1800-$2000.
https://www.costco.com/jura-ena8-...67671.html
Makes:
Ristretto
Espresso
Coffee
Cappuccino
Espresso doppio
Macchiato
Latte macchiato
Flat white
Portion of milk foam
Hot water
Product Features:
Small: Only 10.7" wide, 12.7" high and 17.5" deep – this one- cup machine will comfortably fit anywhere.
Stunning: A particular highlight of the design is the round water tank. Its pattern combined with its cylindrical shape is inspired by premium crystal carafes.
Simple: The front 2.8" TFT color display and the clearly defined operating panels make it extremely easy to use.
Aroma G3 Grinder: For freshly ground, not capsuled coffee.
Ten different specialties are available at the touch of a button. The first VC compact brewing unit ensures that the coffee always flows into the cup under ideal conditions. The Pulse Extraction Process (P.E.P®) optimizes the aroma of a short ristretto or espresso. Fine foam technology creates airy, feather-light milk foam for cappuccino or other specialties.
Dimensions & More Info:
10.7" W x 17.5" D x 12.7" H; Weight: 20.7 Lbs.
Made in Portugal
98 Comments
Your comment cannot be blank.
Featured Comments
I don't have any experience with Saeco/Philips machines, but I've taken a part a Jura Ena Micro 5 and C65, found both on craigslist for a great deal. The C65 was running and only had to be cleaned due to lack of cleaning and mold build up, it was at a holiday home and wasn't used often.
The Micro 5 was a refurb. the couple I got from were students and abused it, the thing was quite dirty and moldy inside.
I eventually found the issue and was able to repair for about $100 bucks.
The main problem was the machine was never cleaned properly, and the brew group was never serviced since they owned it for 4-5 years.
The issues I found were:
1. Brew group was seizing up from lack of lubrication.
2. Brew group main gear was worn from the gear motor being overworked from point 1.
3. Brew group motor mount was loose and stripped adding to the problem.
4. Grinder bearings were dry, a lot of old grounds were caked to the grinder assembly.
With proper care, either machine will run great depending on how its maintained. I'd suggest anyone looking to invest in these machines to also consider if they'll be maintaining it themselves, or having a shop do it.
The best way to look at these super autos is like a car, in the end it requires maintenance and people fail to realize this, then get upset when they need to spend additional money to repair these machines.
I have the earlier version of this Jura. Have been making good Expresso for years. Yes, everything exterior is made of plastic including the bottom tray.
Sign up for a Slickdeals account to remove this ad.
The issue is that I started going down the rabbit hole of the Breville Espresso machines (notably Barista Pro) that might make a better espresso, though with a little extra work but probably less machine maintenance than the Juras.
Why are you comparing this to Keurig? This is not a capsule machine
I have the earlier version of this Jura. Have been making good Expresso for years. Yes, everything exterior is made of plastic including the bottom tray.
Sign up for a Slickdeals account to remove this ad.
This is an espresso machine that is capable of making coffee and espresso, as well as frothing your milk. So, it's a massive upgrade that should replace it.
You can also chose different brews. My Ena 9 has 4 brews it can make, which includes expresso, coffee, latte, and macchiato. The new Ena 8 looks like it has 10 different brews it can make.
I also love the built-in frother. As for flavoring my coffee, I usually use different syrups from Torani or Monin. The only downside with this machine as well as the Keurig's are the small water tanks. On a side note, at least with the Ena 9, I was able to mod it with a float valve so I don't have to refill it manually.
We own multiple coffee machines including Keurig and Nespresso. They are now sitting in the cabinets. I drink latte and espresso occasionally. There is no easy way to switch out beans. Since my wife likes a different bean flavor, I resort to using espresso ground coffee for my latte instead.
You can also chose different brews. My Ena 9 has 4 brews it can make, which includes expresso, coffee, latte, and macchiato. The new Ena 8 looks like it has 10 different brews it can make.
I also love the built-in frother. As for flavoring my coffee, I usually use different syrups from Torani or Monin. The only downside with this machine as well as the Keurig's are the small water tanks. On a side note, at least with the Ena 9, I was able to mod it with a float valve so I don't have to refill it manually.