10GAMER2021 is not working anymore with the Black Friday sale. 5GAMER2021 still works. The price is now:
new EDU price: $2,374.99
5% off w/ 5GAMER2021: $118.75
final price: $2,256.24
I was only able to get a $50 price match after 41 minutes on the phone, YMMV, it's technically not allowed per their price match terms and conditions because of the proximity to the Thanksgiving/Black Friday sale.
expired Posted by roseberry • Nov 18, 2021
Nov 18, 2021 7:08 PM
Item 1 of 3
Item 1 of 3
expired Posted by roseberry • Nov 18, 2021
Nov 18, 2021 7:08 PM
HP EDU: OMEN 30L Gaming Desktop: RTX 3080 Ti, i7-11700K, 32GB RAM, 512GB SSD
+ Free Shipping$2,137
$2,500
14% offHP
Visit HPGood Deal
Bad Deal
Save
Share
Leave a Comment
Top Comments
Bottom line, none of the promo codes worked with a discount program.
283 Comments
Sign up for a Slickdeals account to remove this ad.
Going to put the 1700 RPM in the front instead of the RGB fan.
Replaced the back fan with a "Noctua NF-B9 redux-1600 PWM, High Performance Cooling Fan, 4-Pin, 1600 RPM (92mm, Grey)" and the airflow feels a little better there and a little less noise as well.
Also bought "Noctua NA-SAVP1 chromax.Black, Anti-Vibration Pads for 120/140mm Noctua Fans (16-Pack, Black)" but not sure if they actually help or not.
Waiting on an M.2 drive to arrive to add that, not looking forward to moving the GPU to do it.
Debating on if I want to add more RAM and mix since the HP Fury timings are 22-22-22-52 and not even close to what I would be mixing in with it.
The 3000 RPM Noctua w/ new thermal paste runs about the same temps as the default setup, but noticeably less noise. I went back to the underclock/undervolt since it keeps my load temps around 70c instead of 85c and is much quieter. I didn't replace the front fan since I didn't have any screws that worked. I'll probably get some rubber mounts and see if increased intake helps.
Still debating adding RAM, shouldn't need 64GB any time soon. Still waiting on M.2 drive to get here which will add even more heat to the case. :/
Also, I can't see any fan/pump speeds on the system at all with any software. That means I'm stuck relying on HP's fan control which is a large part of the problem. Hoping this motherboard is just newer and hasn't been added to some of those programs yet.
The 3000 RPM Noctua w/ new thermal paste runs about the same temps as the default setup, but noticeably less noise. I went back to the underclock/undervolt since it keeps my load temps around 70c instead of 85c and is much quieter. I didn't replace the front fan since I didn't have any screws that worked. I'll probably get some rubber mounts and see if increased intake helps.
Still debating adding RAM, shouldn't need 64GB any time soon. Still waiting on M.2 drive to get here which will add even more heat to the case. :/
Also, I can't see any fan/pump speeds on the system at all with any software. That means I'm stuck relying on HP's fan control which is a large part of the problem. Hoping this motherboard is just newer and hasn't been added to some of those programs yet.
https://www.reddit.com/r/HPOmen/c...th_intels/
https://www.reddit.com/r/HPOmen/c...00k3070ti/
Sign up for a Slickdeals account to remove this ad.
https://www.reddit.com/r/HPOmen/c...th_intels/
https://www.reddit.com/r/HPOmen/c...00k3070ti/
Also, sort of excited, I think the last time I bought a new pc was back in the 90's, my current computer is a 13 year old refurbished Asus (was future proof
Sign up for a Slickdeals account to remove this ad.
Leave a Comment