expiredToolDeals posted Dec 15, 2021 08:21 PM
Item 1 of 5
Item 1 of 5
expiredToolDeals posted Dec 15, 2021 08:21 PM
Freud 6" Professional Stacked Dado Saw Blade Set
& More + Free S&H$64
$84
23% offAmazon
Visit AmazonGood Deal
Bad Deal
Save
Share
Heads up, this deal has expired. Want to create a deal alert for this item?
Deal Details
Amazon has Freud 6" Professional Stacked Dado Saw Blade Set w/ Kickback Reducing Shoulder Design (SD206) on sale for $63.50. Shipping is free.
Amazon also has Oshlun 8" 42 Tooth Stack Dado Saw Blade Set w/ 5/8" Arbor (SDS-0842) on sale for $70.82. Shipping is free.
Walmart also has Oshlun 8" 42 Tooth Stack Dado Saw Blade Set w/ 5/8" Arbor (SDS-0842) on sale for $70.82 -> now $66.54. Shipping is free.
Thanks to Community Member ToolDeals for finding this deal.
Amazon also has Oshlun 8" 42 Tooth Stack Dado Saw Blade Set w/ 5/8" Arbor (SDS-0842) on sale for $70.82. Shipping is free.
Walmart also has Oshlun 8" 42 Tooth Stack Dado Saw Blade Set w/ 5/8" Arbor (SDS-0842) on sale for $70.82 -> now $66.54. Shipping is free.
Thanks to Community Member ToolDeals for finding this deal.
Editor's Notes
Written by powerfuldoppler | Staff- About this deal:
- The Freud 6" Professional Stacked Dado Saw Blade Set is priced slightly lower than the previous +39 Frontpage Deal from August.
- About this product:
- The Freud 6" Professional Stacked Dado Saw Blade Set has a 4.7 out of 5 star overall rating on Amazon based on over 900 reviews.
- The Oshlun 8" 42 Tooth Stack Dado Saw Blade Set has a 4.7 out of 5 star overall rating on Amazon based on over 2,000 reviews.
- About these stores:
- To view Walmart's return policy click here.
- To view Amazon's return policy click here.
- Don't have Amazon Prime? Students can get a free 6-Month Amazon Prime trial with free 2-day shipping, unlimited video streaming & more.
- If you're not a student, there's also a free 1-Month Amazon Prime trial available. -Corwin
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Amazon has Freud 6" Professional Stacked Dado Saw Blade Set w/ Kickback Reducing Shoulder Design (SD206) on sale for $63.50. Shipping is free.
Amazon also has Oshlun 8" 42 Tooth Stack Dado Saw Blade Set w/ 5/8" Arbor (SDS-0842) on sale for $70.82. Shipping is free.
Walmart also has Oshlun 8" 42 Tooth Stack Dado Saw Blade Set w/ 5/8" Arbor (SDS-0842) on sale for $70.82 -> now $66.54. Shipping is free.
Thanks to Community Member ToolDeals for finding this deal.
Amazon also has Oshlun 8" 42 Tooth Stack Dado Saw Blade Set w/ 5/8" Arbor (SDS-0842) on sale for $70.82. Shipping is free.
Walmart also has Oshlun 8" 42 Tooth Stack Dado Saw Blade Set w/ 5/8" Arbor (SDS-0842) on sale for $70.82 -> now $66.54. Shipping is free.
Thanks to Community Member ToolDeals for finding this deal.
Editor's Notes
Written by powerfuldoppler | Staff- About this deal:
- The Freud 6" Professional Stacked Dado Saw Blade Set is priced slightly lower than the previous +39 Frontpage Deal from August.
- About this product:
- The Freud 6" Professional Stacked Dado Saw Blade Set has a 4.7 out of 5 star overall rating on Amazon based on over 900 reviews.
- The Oshlun 8" 42 Tooth Stack Dado Saw Blade Set has a 4.7 out of 5 star overall rating on Amazon based on over 2,000 reviews.
- About these stores:
- To view Walmart's return policy click here.
- To view Amazon's return policy click here.
- Don't have Amazon Prime? Students can get a free 6-Month Amazon Prime trial with free 2-day shipping, unlimited video streaming & more.
- If you're not a student, there's also a free 1-Month Amazon Prime trial available. -Corwin
Community Voting
Deal Score
+48
Good Deal
Bad Deal
Price Intelligence
Model: Freud 6 in. D X 5/8 in. TiCo Hi-Density Carbide Dado Set 10 teeth 8 pc
Deal HistoryÂ
Deal History includes data from multiple reputable stores, such as Best Buy, Target, and Walmart. The lowest price among stores for a given day is selected as the "Sale Price".
Sale Price does not include sale prices at Amazon unless a deal was posted by a community member.
Sale Price does not include sale prices at Amazon unless a deal was posted by a community member.
Sale Price
- $NaN
- Today
Current Prices
Sort: Lowest to Highest | Last Updated 4/4/2026, 08:18 PM| Sold By | Sale Price |
|---|---|
 Amazon | $90.77 |
 Ace Hardware | $99.99 |
Found by pennysave
Forum Thread
70% off
There is no voting data on this thread
Found by Taco_Doomsday
Forum Thread
50% off
There is no voting data on this thread
Found by pennysave
Forum Thread
31% off
There is no voting data on this thread
Found by phoinix
Forum Thread
47% off
There is no voting data on this thread
Found by phoinix
Forum Thread
28% off
There is no voting data on this thread
Found by SUCHaDEAL
Forum Thread
There is no voting data on this thread
Found by jk6812
Forum Thread
There is no voting data on this thread
Found by dRinksurgE1975
Forum Thread
50% off
There is no voting data on this thread
Found by jk6812
Forum Thread
33% off
There is no voting data on this thread
Found by suicideskull
Forum Thread
There is no voting data on this thread
Leave a Comment
Top Comments
Some FAQs:
Yes, if you have a 10" table saw, this should be a good blade for your saw.
Yes, you can cut many of the same dados with a router as with a dado set. You can also cut dados using sets like this using a radial arm saw.
No, you do not want an 8" or 10" dado blade for your 10" table saw, unless it's a cabinet saw. As a general rule, if your table saw runs on standard 120V power, you want a 6" or smaller dado set.
Yes, they can double as ninja stars. Practice, practice, practice.
42 Comments
Sign up for a Slickdeals account to remove this ad.
Personally, I would be happy with either as an awesome gift.
Our community has rated this post as helpful. If you agree, why not thank burntorangehorn
Some FAQs:
Yes, if you have a 10" table saw, this should be a good blade for your saw.
Yes, you can cut many of the same dados with a router as with a dado set. You can also cut dados using sets like this using a radial arm saw.
No, you do not want an 8" or 10" dado blade for your 10" table saw, unless it's a cabinet saw. As a general rule, if your table saw runs on standard 120V power, you want a 6" or smaller dado set.
Yes, they can double as ninja stars. Practice, practice, practice.
Some FAQs:
Yes, if you have a 10" table saw, this should be a good blade for your saw.
Yes, you can cut many of the same dados with a router as with a dado set. You can also cut dados using sets like this using a radial arm saw.
No, you do not want an 8" or 10" dado blade for your 10" table saw, unless it's a cabinet saw. As a general rule, if your table saw runs on standard 120V power, you want a 6" or smaller dado set.
Yes, they can double as ninja stars. Practice, practice, practice.
At $300, the Forrest is a bit of a showpiece that with a diamond card, most can easily tune either of the OP (if needed). Every once in awhile a chipper will cut a touch deep, but if short, I just return.
This will be the third (maybe the fourth) 8" Oshlun and the 2nd 6" Freud for us. Unlike the Forrest, or even the Amana, they are cheap enough that we no longer send out to be re-sharpened that has become a bit expensive.
We use the 8" dado set on every 10" table saw with no issues, but the 6" that gives about an 1-1/4" cut is fine for most projects. When used on a 10" radial, the 6" dado is limited by the bottom of the motor housing and why we use the 8" Oshlun with a negative tooth rake ---the Forrest wants to climb and a bit dangerous to pull, but fine on a table saw.
Once up and spinning, it is all about feed rate for that saw.
Seems like if you can only get 1-1/4" out of a 6" dado set, you're not even deep enough for a 2x4...
Sign up for a Slickdeals account to remove this ad.
Edit: Also you'll need to pick up a throat plate. Ridgid might make a dado throat plate for that saw but if they don't you can buy a normal replacement and modify it for the widest stack size. A Dremel or oscillating tool with a plastic blade would suit that task well.
I can't vouch for the quality or fitment of these but this Etsy store sells plates: https://www.etsy.com/listing/8778...nce-insert
I think Woodcraft also sells blank plates for the Ridgid saws.
Not sure what makes that model a hybrid saw, but our similar Ridgid will run either. The 6" speeds up faster and will cut to a depth of about 1 -1/4" that should be more than deep enough for bee hive dividers. Are you going to get fancy and make dovetails for the corners?
PS: The 6 teeth chipper blades on the 8" Oshlun do give a better cut, but taking your time with feed rate and the 6" Freud does decent.
======================
Seems like if you can only get 1-1/4" out of a 6" dado set, you're not even deep enough for a 2x4...
That is about 1 -1/4" deep, not wide. You are going to be limited by width by not only the stack, but by the length of the arbor shaft on the saw. I have never seen a saw that had an extra 1 -1/2" of shaft length and still have any threads left to tighten.
Used, Radial arm saws are about the cheapest and most versatile saw out there. I can pick up nice 10" ones all day for $100 that might need a new wood table that is basically a maintenance item. Many people are afraid of them, but for me, Radial's are what I grew up using. Nobody drug a heavy cast top table saw to a job site.
=================
I can't vouch for the quality or fitment of these but this Etsy store sells plates: https://www.etsy.com/listing/8778...nce-insert [etsy.com]
I think Woodcraft also sells blank plates for the Ridgid saws.
Yes, a lot cheaper to make up several blanks for future use. I like polycarbonate that is cheap with 12" x 12" samples, but wood is fine.
=================
http://forums.delphifo
And consider buying the Mr. Sawdust book, which can walk you through buying and restoring an old Dewalt, written by the late Wally Kunkel, who helped take Dewalt and the radial arm saw into their primes. Then the book gets into how to actually use your saw. It's so easy to follow, even I was able to do it. www.mrsawdust.c
Note: I have no affiliation with the Mr. Sawdust book, and of course no financial interest. I'm just an avid user.
http://forums.delphifo
And consider buying the Mr. Sawdust book, which can walk you through buying and restoring an old Dewalt, written by the late Wally Kunkel, who helped take Dewalt and the radial arm saw into their primes. Then the book gets into how to actually use your saw. It's so easy to follow, even I was able to do it. www.mrsawdust.com [mrsawdust.com]
Note: I have no affiliation with the Mr. Sawdust book, and of course no financial interest. I'm just an avid user.
One needs to set up an account with delphiforums, but Mr. Sawdust blog is interesting. I grew up as a kid helping an Uncle that built custom cabinets on the job site with a Radial.
For at least me, two things with Radials are at the top of need to know .... saw setup and the right blade. There are a lot of available adjustments from the table to the swing arm. Once set up, you need a negative rake blade if pulling a crosscut. If one uses a standard box store blade, most have a positive rake and they will climb or pull into the material. Not much different than a sliding miter, pushing with material behind the blade resolves that issue until you can get the correct blade.
The old 14" and 16" DeWalt are still widely used commercially.
Sign up for a Slickdeals account to remove this ad.
There is an old saying, "No sense in being stupid, unless you can show it."
Leave a Comment