expired Posted by savvyshopper7903 • Dec 30, 2021
Dec 30, 2021 11:19 PM
Item 1 of 6
Item 1 of 6
expired Posted by savvyshopper7903 • Dec 30, 2021
Dec 30, 2021 11:19 PM
CAP Barbell Olympic Hex Trap Weightlifting Bar (Black)
+ Free Shipping$64
$90
28% offAmazon
Visit AmazonGood Deal
Bad Deal
Save
Share
Leave a Comment
Top Comments
Other pro tip, I usually throw a 5 and 10 or two 10s on the inside and invert the heavy plates out. This also gives my knucks enough clearance.
- Design flaw: very little gap between plates & grip handles. Tight fit to get a grip, and then your knuckles may rub against the plates.
- The sleeves are a tad too large, and your plates may not fit. Several recent reviews post that bumper plates with tight tolerances do not fit on the bar.
- Some had poor weld quality and the bar actually broke off at the weld points under weight
- Some had poor material and the bar bent under weight
Basically, for about $65 this is a hit or miss. If you get a good one where welds are good, all your plates fit properly, and don't mind working around the design flaw - then you may like it.
53 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank arkaaya
- Design flaw: very little gap between plates & grip handles. Tight fit to get a grip, and then your knuckles may rub against the plates.
- The sleeves are a tad too large, and your plates may not fit. Several recent reviews post that bumper plates with tight tolerances do not fit on the bar.
- Some had poor weld quality and the bar actually broke off at the weld points under weight
- Some had poor material and the bar bent under weight
Basically, for about $65 this is a hit or miss. If you get a good one where welds are good, all your plates fit properly, and don't mind working around the design flaw - then you may like it.
- Design flaw: very little gap between plates & grip handles. Tight fit to get a grip, and then your knuckles may rub against the plates.
- The sleeves are a tad too large, and your plates may not fit. Several recent reviews post that bumper plates with tight tolerances do not fit on the bar.
- Some had poor weld quality and the bar actually broke off at the weld points under weight
- Some had poor material and the bar bent under weight
Basically, for about $65 this is a hit or miss. If you get a good one where welds are good, all your plates fit properly, and don't mind working around the design flaw - then you may like it.
Other pro tip, I usually throw a 5 and 10 or two 10s on the inside and invert the heavy plates out. This also gives my knucks enough clearance.
Sign up for a Slickdeals account to remove this ad.
Fuel Performance is under CAP.
https://www.walmart.com/ip/Fuel-P.../880657404
4.6 stars out 5 statistically means 23 out of 25 purchases did not have any complaints.
4.6 stars out 5 statistically means 23 out of 25 purchases did not have any complaints.
Like someone mentioning it won't fit some Rogue plates. Lol that's pretty important. Then you have some people saying the problems got fixed with the new version.
So unless you're able to pick v1 or v2, it sorta is like the lottery lol.
Like someone mentioning it won't fit some Rogue plates. Lol that's pretty important. Then you have some people saying the problems got fixed with the new version.
So unless you're able to pick v1 or v2, it sorta is like the lottery lol.
Sign up for a Slickdeals account to remove this ad.
Positive Pamela needs to be evened out with Negative Nancy's. I welcome both
Leave a Comment