T-Mobile Business = 877-347-2127 If you're having problems.
Internal T-Mobile's plan names:
"Bus Unl Tablet 10 GB HS TE" = Taxes and fees extra. SOC code ZB10HSTE
"Bus Unl Tablet 10 GB HS TI" = Taxes and fees included. SOC code ZB10HSTI
For adding HD Video Pass use SOC code : HDVPASS0
Who's eligible
- Available to new lines of service only. No voice line requirement.
- US and Puerto Rico (SJP) Business customers.
- Tax Exclusive Plan: B/C, B/L, B/M, B/N, B/O, B/P, I/S.
- Tax Inclusive Plan: B/C, B/L, B/N, B/P, I/S, Both TI and TE $10 Unlimited Tablet Promo Plan included within the following SOC Groups: 5, 9, 9A, 10, 10B, 21, 22, 34, 41, 59, and 67.
- Government account types
- Consumer customers
- Cannot be combined with tax included plans.
- Retired features and promotional lines/service credit offers will be removed upon switching to this plan.
- Tax Exclusive plans only eligible to Tax Exclusive BANS
- Tax Inclusive plans only eligible to Tax Inclusive BANS
- Voice line not required
- No migrations
- There is no annual contract (Un-contract) or activation fee.
- These plans do not include Music Freedom, Binge On, or Data Stash.
- All on-network data used counts towards fair-use de-prioritization limits.
Not available
- AVD
- Netflix on Us
- $40 Voice + Tablet credit.
- $5 AutoPay bill credit ($5 per line, up to 8 lines / $40 max credit). See the page for more details.
From this post
The multiple ways of using this $10 line for home internet are:
1. T-Mobile Gateway + Cudy N300 or X6 which are wifi only routers to mask hotspot usage with TTL set on the external wifi router. You can use other wifi routers for this purpose but there's a menu page in the Cudy routers which makes setting TTL easy - Courtesy waterchange
1.1 Cudy router like Cudy LT500 or LT18 or the 5G P8 work as a single device with modem + wifi router. Work well for home internet. Nice thing about the Cudy modems is easy TTL (and imei magic if necessary). - Courtesy waterchange
2. M2100 hotspot device - Hit or a miss - native out of the box but less reliable
3. Orbic 5G hotspot device - more reliable than the m2100, however some people have reported throttling after 1st couple of months
4. Gateway + Project Genesis - works most reliably
5. TMOHS1 - ~ 30-50 mbps out of the box, no TTL update required
6. Tmobile Franklin - ~30-50 mbps with TTL update - the most reliable as of right now, however limited speed.
7. M2000 won't pull data from anywhere.
8. GL.iNET Spitz GL-X3000NR easier to use than Cudy and better performance but expensive. Great form factor and performance. Presets for T-Mobile TTL settings and advanced cell features like tower/band lock. External antennas.
9. M3000B works out of the box with T-Mobile version. Has battery preservation features and ethernet port. Some users say to switch 5G mode to NSA if the hotspot restarts frequently in your area.
Add/update if you have more/better info.
Leave a Comment
Top Comments
They will still lock you to a 2 year EIP even if it's free (They'll make a monthly credit to cover the tablet EIP)
Meaning you'd end up paying $10 for 2 years ($240) for a $129 tablet.
So if you're only doing it for the tablet then it's not worth it
soc code ZB10HSTI is the one you want.
5,732 Comments
Sign up for a Slickdeals account to remove this ad.
PS C:\Users\nguye\Downloads\TMOHS1-Root-Utility-main\TMOHS1-Root-Utility-main> python ./rootScript.py -v
Verbose mode enabled.
Enter your weblogin password:
Encrypting the login payload with key "abcdefghijklmn12" [yes, that's really the key]. . .
Sending the authentication request. . .
Error: The hotspot rejected our login attempt with error 3 (likely incorrect password).
Error details:
Response status code: 200
Response data: {'result': '3', 'ip': '0'}
After I downloaded and extracted the file TMOHS1-Root-Utility-main.zip I found it easier to place ALL the extracted files in the Python 310 directory created by the Python install, python-3.10.6-amd64.exe, so that they are in the same PATH.
IF you do that, ALL the files will be in one directory where the Python was installed, and you don't have to change directory.
Use the Windows File Manager to move/copy files to that directory.
OR
you can do the CD as stated above by Jeff.
The above shows that the path is not correct.
Check the above suggestion.
These are the 2 commands that must be run:
PS D:\TMOHS1_Root_Utility> .\pip install -r requirements.txt
and
PS C:\Users\WIN_8\AppData\Local\Programs\Python\Python310> py ./rootScript.py -v
They can be run from their individual directories or from a single directory as I suggested above.
In my Step 1 for command 1, the pip files were unzipped to this directory: D:\TMOHS1_Root_Utility
and then the command was run: .\pip install -r requirements.txt
Modify the path to where the pip files were unzipped in your computer and make sure you are in that directory to run the command.
For the 2nd Step, again make sure you are in the correct directory path:
PS C:\Users\WIN_8\AppData\Local\Programs\Python\Python310>
and then run the command:
py ./rootScript.py -v
OR as I said above if both are in the same directory then there is no need to do the CD, change directory.
PS C:\Users\nguye\Downloads\TMOHS1-Root-Utility-main\TMOHS1-Root-Utility-main> python ./rootScript.py -v
Verbose mode enabled.
Enter your weblogin password:
Encrypting the login payload with key "abcdefghijklmn12" [yes, that's really the key]. . .
Sending the authentication request. . .
Error: The hotspot rejected our login attempt with error 3 (likely incorrect password).
Error details:
Response status code: 200
Response data: {'result': '3', 'ip': '0'}
I had forgot mine, so insert like needle on small Pin Hole next to battery cover (like battery cover is closed, there is small Hole to the left side) Keep it pressed for 10 seconds and it will reset to factory settings and then you can use the password on the sticker, or login once and change to something you can remember.
PS C:\Users\nguye\Downloads\TMOHS1-Root-Utility-main\TMOHS1-Root-Utility-main> python ./rootScript.py -v
Verbose mode enabled.
Enter your weblogin password:
Encrypting the login payload with key "abcdefghijklmn12" [yes, that's really the key]. . .
Sending the authentication request. . .
Error: The hotspot rejected our login attempt with error 3 (likely incorrect password).
Error details:
Response status code: 200
Response data: {'result': '3', 'ip': '0'}
I think it's Admin1234 where 1234 are the last 4 digits of the IMEI or the last 8 digits of the IMEI of the device, unless you've changed it.
You will not see anything as you type the password, just hit ENTER after you type it, and make sure there are no typo mistakes.
Also, you will not see anything typing later on IF you choose to change/set the custom root password.
IF you change/set it, make sure you write it down, if you forget it the device will be inaccessible later if you need to access it again.
Not sure if the TMOHS1 can be reset to the factory settings by pressing in the pin hole since its root settings have been hacked/changed, but it may be possible.
So it's best to write down the changed root password.
I think it's Admin1234 where 1234 are the last 4 digits of the IMEI or the last 8 digits of the IMEI of the device, unless you've changed it.
You will not see anything as you type the password, just hit ENTER after you type it, and make sure there are no typo mistakes.
Also, you will not see anything typing later on IF you choose to change/set the custom root password.
IF you change/set it, make sure you write it down, if you forget it the device will be inaccessible later if you need to access it again.
Not sure if the TMOHS1 can be reset to the factory settings by pressing in the pin hole since its root settings have been hacked/changed, but it may be possible.
So it's best to write down the changed root password.
it doesn't work (on two computers) with the password on the back it is Adminxxxx (last four of the IMEI number like you mentioned)
Tried resetting the TMOHS1 by pressing into the hole next to battery too, it resets but again didn't work
Should I activate the SIM?
it doesn't work (on two computers) with the password on the back it is Adminxxxx (last four of the IMEI number like you mentioned)
Tried resetting the TMOHS1 by pressing into the hole next to battery too, it resets but again didn't work
Should I activate the SIM?
Also, using WiFi, follow the instructions that came with the device:
First try to log in to the device's interface using a browser.
I think it's 192.168.0.1
If you're able to log in then that's the correct password.
If not try the reset again.
Sign up for a Slickdeals account to remove this ad.
Please verify your email for T-Mobile Network Test Drive
then within a few minutes after you do the verify you'll get another email:
Your Order has been placed.
Then, after around 3 days you'll get another email:
T-Mobile Shipping Confirmation
A few days later you should get the device.
Also, using WiFi, follow the instructions that came with the device:
First try to log in to the device's interface using a browser.
I think it's 192.168.0.1
If you're able to log in then that's the correct password.
If not try the reset again.
I did log put the sim on, log into the site 192.168.0.1 and reset the password from there and the hack took the new password correctly
everything else became smooth.
Or your phone may already have a display setting for blue light.
It not only will protect your eyes but it will also help your face from looking like dry raisin later in life.
See this:
https://www.msn.com/en-us/health/other/scientists-find-link-between-looking-at-digital-phone-screens... [msn.com]
Search this thread for:
m2100 bands
and
m2100 speed
and
m2000 bands
and
TMOHS1 speed
Also check this post for some relevant info:
https://slickdeals.net/forums/showpost.php?p=
Please verify your email for T-Mobile Network Test Drive
then within a few minutes after you do the verify you'll get another email:
Your Order has been placed.
Then, after around 3 days you'll get another email:
T-Mobile Shipping Confirmation
A few days later you should get the device.
Sign up for a Slickdeals account to remove this ad.
Search this thread for:
m2100 bands
and
m2100 speed
and
m2000 bands
and
TMOHS1 speed
Also check this post for some relevant info:
https://slickdeals.net/forums/showpost.php?p=
Lots of what? Nothing mentioned about bands
Leave a Comment