I hope some might benefit by having this number since their email communication has failed for me. I emailed them over the weekend and heard nothing back Monday. Monday night, I got a "preparing to ship" update, but it has not been given to the carrier yet. Hope I can get it canceled instead of having to ship it back at my expense or have to keep it to avoid losing money.
800-493-1646 PHONE HOURS: M-F 9:30am-4:30pm EST
-c2nah777 Tuesday 8/30/22 10:37 am
9/14/22: Joyride has suspended customer support calls according to the recording.
According to the recording the only way to contact them is to email [email protected] or use the Contact Us form on the website [joyridebike.com]
This post can be edited by most users to provide up-to-date information about developments of this thread based on user responses, and user findings. Feel free to add, change or remove information shown here as it becomes available. This includes new coupons, rebates, ideas, thread summary, and similar items.
Once a Thread Wiki is added to a thread, "Create Wiki" button will disappear. If you would like to learn more about Thread Wiki feature, click here.
Item 1 of 6
Item 1 of 6
expiredosugsxr posted Jul 29, 2022 3:44 PM
Top Comments
Perhaps you even have a different LCD Display? I can see on the back of mine it says it is Model AK47.
I have tried searching for hacks on Model AK47 but haven't come up with anything, but see this is in fact the display as quantities can be bought from Alibaba etc, showing this display.
I did notice I can get to some type of undocumented menu on mine with PO levels and settings by holding down the up and down at the same time while the display is on.
Edit:
Ah, I figured out how to remove the limit!!
These PO settings look to be standard.
So get to the PO settings by holding the Up/Down at the same time after the LCD is on.
Click on the power button to go through the PO's.
PO8 is the limit! This is in kmh, this was set to 32, bump this up with the up arrow to 41. That is the max I could change it to. This works out to 25.5 mph.
After this change I can get to 25mph going down a hill.
On a straight road I can cruise at about 22 with full throttle. Pedaling fast like crazy I can get it up 24.
So this is a bit of an increase. Perhaps with a bigger front sprocket I could peddle a bit normally and get to 25.
Perhaps it is a limit of the 350W motor or the battery to get me with throttle to 23 or so, but I don't think the controller itself will let me go above 41kph with motor assist.
Possibly changing wheel size, PO6, would allow assist at faster speed?
FYI, I see some people have commented about their having 5 instead of 3 levels. This can be set in the PO5 setting.
Here are the PO settings for an entirely different controller, but they look pretty close from what I see. https://elecbikeparts.c
There could be some other cool settings to see what they are and work with them.
for example: P12 PAS Start Strength
0-5, Higher = more assistance
Amount of assistance given when you start pedaling.
I am thinking this must be low. It seems to give very little help right away. Perhaps a safety feature set at factory? But I want help right away!
Or PO9 might affect how quickly it helps?
P09 Throttle Response
0 for instant throttle, 1 for delayed throttle
Sets whether pressing throttle and motor beginning to spin is instant, or whether there is a delay between the actions.
Edit: P09 was already set at 0 and can't be changed
P12 was set at 3 and can't go higher, but it can go lower.
FYI, read on this site https://power-bicycle.com/ebike-power/ that hub motors are pretty much limited to 25.
"Once the ebike is travelling at 25 MPH, the controller-wheel speed is maxed out. You can't go far over 25 MPH on most hub motors unless the motor & controller pair are designed for higher speeds."
This guy also talks about a smoothing circuit the mfgs implement for greater distance. Something about a loop back wire that can be removed to increase initial assistance but at
a sacrifice in distance.
Not a lot of reviews. I got a warning going to this site (possibly fraudulent?).
Why don't they sell any ebikes on their non-corporate site?
Is anyone else concerned this is a knockoff? Joyridebikes.com is the original site (since 2001) selling Hurley and joyridebike.com (since 2015) is painted with 'weird' all over it.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
724 Comments
Sign up for a Slickdeals account to remove this ad.
What brand trailer do you have? Here is a guide I found, and it sounds like perhaps the Schwinn will work without an adapter but it will be a while before they can try it out.
https://www.biketrailer
Same bike, just different branding.
It is a slightly smaller kickstand than the original, so I need to replace entire kickstand instead of just the rubber part on the installed one.
I've tried it multiple times, I hear the motor rev up a bit, but that is it. My assumption is Constant Cruise Mode enables the bike to move forward at the current speed without pedal assist, I may be wrong.
Sign up for a Slickdeals account to remove this ad.
I've tried it multiple times, I hear the motor rev up a bit, but that is it. My assumption is Constant Cruise Mode enables the bike to move forward at the current speed without pedal assist, I may be wrong.
Tailslide: alloy frame
Even after 20 miles of assist level 3, it's still showing 2-3 bars for the battery. I don't know if that's correct or not but it seems to be more efficient than stated.
Sign up for a Slickdeals account to remove this ad.
https://corporate.joyri
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!