Original Post
Written by
Edited September 15, 2022
at 10:15 AM
by
Red Devil Window & Door Siliconized Acrylic Caulk, 10.1oz - Amazon $3.31
Red Devil 084650 Window & Door Siliconized Acrylic Caulk, 10.1 oz, Gray
https://www.amazon.com/dp/B003TEH2RS
Gray is $3.31
https://www.amazon.com/dp/B000BQSV2M -
OOS
White is $3.38
Both shipped and sold by Amazon
All other variations/colors are not a slick deal.
Provides extra tight seals around windows, doors and other areas. This multi-purpose, paintable sealant can be used indoors or outdoors and helps increase energy efficiency by reducing drafts and cold spots. It also provides a barrier to the entry of dirt. Adheres to Painted and Unpainted Wood, Brick, Plaster, Drywall, Aluminum, Masonry, Cement, Metal, Glass.
Easy Application and Tooling
Excellent Adhesion To Many Surfaces
Paintable
Interior/Exterior Use
Water Clean Up
35 Year Durability
https://www.amazon.com/dp/B003TEH2RS
45 Comments
Your comment cannot be blank.
Featured Comments
This type of caulk will mould, crack and need to be replaced within 2 years. The good stuff will last 10+ depending on type and application. Most people have no clue about this.
Only contractor-grade 100% silicone caulks should be considered as they do their jobs properly and last the longest. Dow Corning is one brand that makes top notch product. Do some research. I buy that stuff in a contractor-specific stores as you'll never find that in home improvement places. Amazon has some variety but expiration dates are critical with these, so that's a risk.
Hope this helps.
https://youtube.com/shorts/CZpamv...ture=s
You did not give much info ...but I am guessing that it is a wood door?
And I am not sure what you think is a little hole.
There are a number of things to use...but caulk is not one.
For somebody that does not have a lot of experience, I would suggest mixing construction adhesive with sawdust and filling in the hole with that before it dries.
Or, instead of sawdust, if you can get it to fit in the hole, put in a little screen wire. This is assuming that the construction adhesive needs a little extra to grab onto.
It may take more than 1 application. Once the hole is filled and the adhesive is totally dry, then you may need to sand a little to get the spot smooth. After that, just paint it. That should be a permanent fix.
Sign up for a Slickdeals account to remove this ad.
In for 3 anyway though. Thanks OP.
Our community has rated this post as helpful. If you agree, why not thank SharpSwing4318
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank WatchMyScotch
https://youtube.com/shorts/CZpamv...ture=s
Biting my tongue on that one. 😂
Our community has rated this post as helpful. If you agree, why not thank earthbound2k
This type of caulk will mould, crack and need to be replaced within 2 years. The good stuff will last 10+ depending on type and application. Most people have no clue about this.
Only contractor-grade 100% silicone caulks should be considered as they do their jobs properly and last the longest. Dow Corning is one brand that makes top notch product. Do some research. I buy that stuff in a contractor-specific stores as you'll never find that in home improvement places. Amazon has some variety but expiration dates are critical with these, so that's a risk.
Hope this helps.
This type of caulk will mould, crack and need to be replaced within 2 years. The good stuff will last 10+ depending on type and application. Most people have no clue about this.
Only contractor-grade 100% silicone caulks should be considered as they do their jobs properly and last the longest. Dow Corning is one brand that makes top notch product. Do some research. I buy that stuff in a contractor-specific stores as you'll never find that in home improvement places. Amazon has some variety but expiration dates are critical with these, so that's a risk.
Hope this helps.