Did this coupon
work for you?
work for you?
Sold By | Sale Price |
---|---|
Amazon | $47.98 |
Product Name: | Weller D550PK 260-Watt/200W Professional Soldering Gun Kit with Three Tips and Solder in Carrying Case |
Manufacturer: | Apex Tool Group |
Model Number: | D550PK |
Product SKU: | B00002N7S1 |
The link has been copied to the clipboard.
63 Comments
Your comment cannot be blank.
Featured Comments
It's a fair question for someone to ask, and the only way they're going to learn is by asking.
The ryobi is nice if you're doing very light duty work that's not temperature sensitive. Think soldering speaker wires together. I wouldn't use it on a circuit board extensively, as it doesn't have that granular levels of temp control, but you could use it for larger through-hole components like resistors and whatnot. Like I said, not my first choice. I'd probably go with the Pinecil soldering iron as a starter iron for circuit board work.
The Weller gun is nice for larger, chonky wires -- like extension cord thicknesses. It's a very hot iron at 260w/200w, and has virtually no temp control. It's like taking a torch to something. And sometimes, you need that ability to dump a LOT of heat into something quickly. I wouldn't take this thing anywhere near a circuit board.
Sign up for a Slickdeals account to remove this ad.
https://smile.amazon.co
I'm no soldering expert and only do limited PCB soldering. But I've been able to do a pretty good job repairing boards with this kit. Much better than trying to use a plain old Weller iron.
I also got their desoldering gun and that's been worth it's weight in gold. Been able to repair boards that would otherwise cost thousands to replace.
Our community has rated this post as helpful. If you agree, why not thank Masejoer
Corrosion or oxidation can cause a crimped-only connection to perform poorly a few years to decades later, especially at low Voltage. For indoor and dry projects, crimping should be fine for "life." I don't enjoy troubleshooting random electric issues though (more apparent on certain automotive circuits), so I'll solder, or crimp and solder, but never just crimp. Of course a good crimper makes life far more pleasant on that half of the connection.
As for other discussions - solder gun is used typically for wires or other medium-duty connections, I'd say up to 6awg wire/metals. Anything larger it's much quicker to just use a torch. Smaller and electronics, a soldering pen/station is used.
What's the trigger for if it doesn't feed the solder wire?
Sign up for a Slickdeals account to remove this ad.
Squeezing and holding the trigger allows it to heat up. When you let go it cools back down.
Sign up for a Slickdeals account to remove this ad.
Skip it. Do yourself a favor. I have been soldering over 30 years and have used these, 12vdc cigarette lighter plug powered irons, butane (old and new), battery, you name it.
Everyone I know who had one of these had the same experience, and once I gave them a real iron and showed them the difference their ability went way up, and their comfort soldering went way up.
Go to a hardware store and buy the 40 watt iron of choice they have...it will do a better job and you will be better at it.
These guns have zero heat control..either on or off, they are bulky, have terrible tip design, and are way too hot for anything you actually need to solder...even extension cord (which can be anywhere from 18g to 10g..thats a huge range)
If you need hotter than 40 watts for something like welding cable (40 will solder 10g easily) pickup a vintage big one on eBay for short money.