expired Posted by minntwins | Staff • Aug 22, 2023
Aug 22, 2023 11:02 AM
Item 1 of 6
Item 1 of 6
expired Posted by minntwins | Staff • Aug 22, 2023
Aug 22, 2023 11:02 AM
30" Black+Decker Workmate 125 Folding Portable Workbench and Vise
+ Free Shipping$15
$37
59% offHome Depot
Visit Home DepotGood Deal
Bad Deal
Save
Share
Top Comments
$15 is meh.
63 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank gemniii42
$15 is meh.
After putting my anvil on it, I didn't even get one horseshoe done before the whole thing collapsed!
https://www.harborfreig
https://www.homedepot.c
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank Zwali
- The instructions are not as clear as they should be
- One of the leg assemblies I received was missing screw holes. I contacted B&D - they sent out a new leg, but only sent out a single leg even though it's an attached piece in the box, so I would have had to disassemble the leg piece I had and reassemble it. I drilled my own holes instead.
- There's a pin that should attach the handle to the bench. I can't get either of the pins to go in fully. As it's plastic I don't want to hammer too hard, but even using a vice I wasn't able to push it in.
TL;DR - if you need a cheap workbench and are willing to live with poor quality you'll probably like this.
After putting my anvil on it, I didn't even get one horseshoe done before the whole thing collapsed!
delivery is also free with 2 of these.
- The instructions are not as clear as they should be
- One of the leg assemblies I received was missing screw holes. I contacted B&D - they sent out a new leg, but only sent out a single leg even though it's an attached piece in the box, so I would have had to disassemble the leg piece I had and reassemble it. I drilled my own holes instead.
- There's a pin that should attach the handle to the bench. I can't get either of the pins to go in fully. As it's plastic I don't want to hammer too hard, but even using a vice I wasn't able to push it in.
TL;DR - if you need a cheap workbench and are willing to live with poor quality you'll probably like this.
Sign up for a Slickdeals account to remove this ad.
https://www.harborfreight.com/fol...47844.html [harborfreight.com]
"When compared to the Black & Decker workbench, this little bench is much more sturdy and better quality. I have used it for about two weeks now and it has held pieces of wood that weigh almost 150 lbs."