expired
Folding Wood Top Wall Mounted Workbench: 41" or 48"
$75 each
$150
+ Free Shippingat Home Depot
Browse every Black Friday offer we could findBrowse every Black Friday offer we could find
View The Sift Missed This Deal? Get alerts when similar deals are posted.
+ Free Shippingat Home DepotDeal Details
Home Depot has 48" Folding Wood Top Wall Mounted Workbench (WSHD48FWB) on sale for $75. Shipping is free.
Thanks to Deal Hunter Rokket [discuss] and Community Member waehrik for sharing this deal.
Specs:
Thanks to Deal Hunter Rokket [discuss] and Community Member waehrik for sharing this deal.
Specs:
- 41"
- Dimensions: 41.5" x 24"
- Top Thickness: 0.75"
- Weight Capacity: 400lbs
- 48"
- Dimensions: 48" x 24"
- Top Thickness: 1.25"
- Weight Capacity: 500lbs
Editor's Notes
Written by SaltyOne | Staff- About this Deal:
- Rated 4.8 to 5 out of 5 stars from customer reviews.
- No Longer Available:
- Home Depot also has 41" Folding Wood Top Wall Mounted Workbench (G4100FW-US) on sale for $75. Shipping is free.
Product Info
Community Notes
About the Poster
Deal Details
Product Info
Community Notes
About the Poster
Home Depot has 48" Folding Wood Top Wall Mounted Workbench (WSHD48FWB) on sale for $75. Shipping is free.
Thanks to Deal Hunter Rokket [discuss] and Community Member waehrik for sharing this deal.
Specs:
Thanks to Deal Hunter Rokket [discuss] and Community Member waehrik for sharing this deal.
Specs:
- 41"
- Dimensions: 41.5" x 24"
- Top Thickness: 0.75"
- Weight Capacity: 400lbs
- 48"
- Dimensions: 48" x 24"
- Top Thickness: 1.25"
- Weight Capacity: 500lbs
Editor's Notes
Written by SaltyOne | Staff- About this Deal:
- Rated 4.8 to 5 out of 5 stars from customer reviews.
- No Longer Available:
- Home Depot also has 41" Folding Wood Top Wall Mounted Workbench (G4100FW-US) on sale for $75. Shipping is free.
Community Voting
Deal
Score
+47
Good Deal
Bad Deal
Price Intelligence
Deal History
Deal History includes data from multiple reputable stores, such as Best Buy, Target, and Walmart. The lowest price among stores for a given day is selected as the "Sale Price".
Sale Price does not include sale prices at Amazon unless a deal was posted by a community member.
Sale Price does not include sale prices at Amazon unless a deal was posted by a community member.
Sale Price
- $NaN
- Today
Top Comments
1. The brackets are held to the wood by extremely small screws. The brackets will wobble. Two screws actually had the head broken off, resulting in just the body of the screw stuck in the wood. Luckily there is enough room to drive another screw of your choice in next to any broken off ones. Note, I don't think it is a huge deal that they are a bit wobbly pre-installation, because once installed to studs, they can no longer wobble. They'd have to both wobble together, and I haven't found this to be an issue.
2. The braces come with lock nuts on the bolts. This is good. The bad thing is, you MUST check them. Nearly half of the nuts were not even hand tight. I have to assume this is by design and they expect you to tighten them.
3. You cannot tighten the nuts and bolts too much. As a matter of fact, there are two bolts in particular which should be replaced with half-inch longer ones. Reason being, the nylon portion of the lock nut is almost not engaged at all. If you tighten it to the point that the lock nut is doing its job, the mechanism will no longer slide easily.
4. There are extra grooves in the wood on the back if you have non-standard stud placement. It comes factory 32" center to center to span across two studs, and it does that perfectly.
5. The wood tops are nice. I accept the faults of the brackets at this price.
Thanks for the great deal!
https://www.homedepot.c
The locking mechanism is a bit different though and doesn't have gas springs
https://www.amazon.com/dp/B088QB8...b_ap_
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
33 Comments
Sign up for a Slickdeals account to remove this ad.
Then I removed only one half of the bracket (the part that mounts to the wall). I set the middle hole where the horizontal and vertical beams met, right in the middle of the plus sign. I then went 32 inches to the left and made a mark on the horizontal plane. I moved the laser level over to where I made the mark (on a stud of course) and marked all the holes on that side.
Then I reattached the half of the bracket back to the table and held it up by stacking things underneath... In my case a coupl Milwaukee tool boxes and a hunk of 4x6. That allowed me to line up the holes/marks I made perfectly. Screwed in the bolts to the studs and called it a day!
Sorry for the long winded response, a picture would have been better.
TL;DR: I removed them to mark the wall.
https://www.homedepot.c
https://www.homedepot.com/p/41-in.../317141746 [homedepot.com]
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!