This was a previously popular front deal deal that earned 73 thumbs up when it sold for $21.99.
Our research indicates that this deal is $4.99 less (20% savings) than the next best available price from a reputable merchant with prices starting from $24.98 at the time of this posting.
Rated 4.6 out of 5 stars on Amazon based on over 16025 customer reviews.
Refer to the forum thread for additional details and community discussion.
Deal History includes data from multiple reputable stores, such as Best Buy, Target, and Walmart. The lowest price among stores for a given day is selected as the "Sale Price".
Sale Price does not include sale prices at Amazon unless a deal was posted by a community member.
IRWIN VISE-GRIP Wire Stripper, 2 inch Jaw, Cuts 10-24 AWG, ProTouch Grip for Maximum Comfort (2078300)
Manufacturer:
IRWIN
Model Number:
2078300
Product SKU:
B000OQ21CA
UPC:
639302638064
ASIN:
B000OQ21CA
Brand:
IRWIN
Item Dimensions LxWxH:
9.84252 x 3.1496062 x 8.661417 inches
Item Weight:
0.4 pounds
Item model number:
2078300
Manufacturer:
IRWIN
Don't have Amazon Prime? Students can get a free 6-Month Amazon Prime trial with free 2-day shipping, unlimited video streaming & more.
If you're not a student, there's also a free 1-Month Amazon Prime trial available.
You can also earn cash back rewards on Amazon and Whole Foods purchases with the Amazon Prime Visa credit card. Read our review to see if itโs the right card for you.
Worked for a company that builds dental equipment. I worked on the assembly line, and they handed me a set of these for wire stripping. I set them down and picked up a set of the style that have multiple stripping sizes in the front of the jaws (not the ones in the rear of handles). I worked circles around everyone else. When asked how I was so efficient, I told them their 30.00 strippers slow things down, and after 10yrs in car audio, I could strip faster with a simple cheap set. With a set of Klein that had both wire cutters and crimps in the Jaws even faster, they refused to allow me to crimp as their crimps were "calibrated."
Long story short.. if you are a novice, these may be fine for you.. if you are cutting and stripping daily... learn to use the cheap set, and it will save you time.
Worked for a company that builds dental equipment. I worked on the assembly line, and they handed me a set of these for wire stripping. I set them down and picked up a set of the style that have multiple stripping sizes in the front of the jaws (not the ones in the rear of handles). I worked circles around everyone else. When asked how I was so efficient, I told them their 30.00 strippers slow things down, and after 10yrs in car audio, I could strip faster with a simple cheap set. With a set of Klein that had both wire cutters and crimps in the Jaws even faster, they refused to allow me to crimp as their crimps were "calibrated."
Long story short.. if you are a novice, these may be fine for you.. if you are cutting and stripping daily... learn to use the cheap set, and it will save you time.
i don't have extensive experience like you have, but i start with a pair of scissors, and eventually had a chance to use those automatic stripper. i must agree with you that one with experience, even just a bit experience, would be better served by a regular, none-automatic one.
but i do think the calibrated crimper is actually a valid point, not sure about dental equipment, but where i used to work for environment that is subject to extreme vibration, and i can see a calibration is required.
Worked for a company that builds dental equipment. I worked on the assembly line, and they handed me a set of these for wire stripping. I set them down and picked up a set of the style that have multiple stripping sizes in the front of the jaws (not the ones in the rear of handles). I worked circles around everyone else. When asked how I was so efficient, I told them their 30.00 strippers slow things down, and after 10yrs in car audio, I could strip faster with a simple cheap set. With a set of Klein that had both wire cutters and crimps in the Jaws even faster, they refused to allow me to crimp as their crimps were "calibrated."
Long story short.. if you are a novice, these may be fine for you.. if you are cutting and stripping daily... learn to use the cheap set, and it will save you time.
Then you don't know how to use them. Handle-cut strippers take multiple movements, while these are single movement. You should probably try again.
i don't have extensive experience like you have, but i start with a pair of scissors, and eventually had a chance to use those automatic stripper. i must agree with you that one with experience, even just a bit experience, would be better served by a regular, none-automatic one.
but i do think the calibrated crimper is actually a valid point, not sure about dental equipment, but where i used to work for environment that is subject to extreme vibration, and i can see a calibration is required.
Calibrated was.. that the crimps didn't pull apart under "x" force.
It's done so those using a specific tool meet that crush point on the splice or caps used. They may not have the hand strength to do it with manual crimper otherwise.. the calibrated ratcheting style crimpers give an audible click.
The dental equipment I made was the wet vac pumps that sit in a closet in some back room corner and suck the spit out of your mouth ๐
Came here to say I owned two of this awesome tool for over 5 years now. Just went and looked up what I paid from Amazon, it wasโฆ. $19 back in 01/2016 and $9.58 back in 02/2018.
Then you don't know how to use them. Handle-cut strippers take multiple movements, while these are single movement. You should probably try again.
Ummm, and you don't know how to read? Or comprehend what you read? you should probably try that again.
I specifically state NOT the ones that strip at the rear of the handles (those are trash.. the ones that come in crimp kits)... but the ones that strip at the jaws... they take ONE fluid movement to strip, and I was MORE efficient than others who had worked the same product line for years.
With a pair of Kleins that have the wire cutters at the tip and the crimps at the rear of the jaw that takes a bit more skill as it is all done via muscle memory so as not to cut the wires. But those can strip and crimp all in one tool without ever setting them down.
I did pro car audio for 10 years as a job and was also an electronics tech in the military... I'm pretty sure I have a basic concept and knowledge on how to be effective and efficient at my jobs.
Worked for a company that builds dental equipment. I worked on the assembly line, and they handed me a set of these for wire stripping. I set them down and picked up a set of the style that have multiple stripping sizes in the front of the jaws (not the ones in the rear of handles). I worked circles around everyone else. When asked how I was so efficient, I told them their 30.00 strippers slow things down, and after 10yrs in car audio, I could strip faster with a simple cheap set. With a set of Klein that had both wire cutters and crimps in the Jaws even faster, they refused to allow me to crimp as their crimps were "calibrated."
Long story short.. if you are a novice, these may be fine for you.. if you are cutting and stripping daily... learn to use the cheap set, and it will save you time.
Spot on. This style of wire stripper is also better when replacing outlets and sockets as they don't require as much space. Sometimes you come across a short wire and this bulky stripper will be a PITA.
One thing to look for in that style of stripper - get the kind with a spring that auto opens. It will save a lot of time and hand effort.
These self stripping doohickeys really only make sense if you're stripping a lot of wires every day.
65 Comments
Your comment cannot be blank.
Featured Comments
Klein Tools 11061 Self-Adjusting Wire Stripper / Cutter, Heavy Duty, for 10-20 AWG Solid, 12-22 AWG Stranded, and Romex Wire 12/2 and 14/2
https://a.co/d/cP4uETY
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank PM-Me-Your-Coupons
Long story short.. if you are a novice, these may be fine for you.. if you are cutting and stripping daily... learn to use the cheap set, and it will save you time.
Long story short.. if you are a novice, these may be fine for you.. if you are cutting and stripping daily... learn to use the cheap set, and it will save you time.
but i do think the calibrated crimper is actually a valid point, not sure about dental equipment, but where i used to work for environment that is subject to extreme vibration, and i can see a calibration is required.
Long story short.. if you are a novice, these may be fine for you.. if you are cutting and stripping daily... learn to use the cheap set, and it will save you time.
Sign up for a Slickdeals account to remove this ad.
but i do think the calibrated crimper is actually a valid point, not sure about dental equipment, but where i used to work for environment that is subject to extreme vibration, and i can see a calibration is required.
Calibrated was.. that the crimps didn't pull apart under "x" force.
It's done so those using a specific tool meet that crush point on the splice or caps used. They may not have the hand strength to do it with manual crimper otherwise.. the calibrated ratcheting style crimpers give an audible click.
The dental equipment I made was the wet vac pumps that sit in a closet in some back room corner and suck the spit out of your mouth ๐
Ummm, and you don't know how to read? Or comprehend what you read? you should probably try that again.
I specifically state NOT the ones that strip at the rear of the handles (those are trash.. the ones that come in crimp kits)... but the ones that strip at the jaws... they take ONE fluid movement to strip, and I was MORE efficient than others who had worked the same product line for years.
With a pair of Kleins that have the wire cutters at the tip and the crimps at the rear of the jaw that takes a bit more skill as it is all done via muscle memory so as not to cut the wires. But those can strip and crimp all in one tool without ever setting them down.
I did pro car audio for 10 years as a job and was also an electronics tech in the military... I'm pretty sure I have a basic concept and knowledge on how to be effective and efficient at my jobs.
This is when I bought it. Life changer.
Yep! I got these for 18 in 2021. They are fantastic. Good price.
Long story short.. if you are a novice, these may be fine for you.. if you are cutting and stripping daily... learn to use the cheap set, and it will save you time.
Spot on. This style of wire stripper is also better when replacing outlets and sockets as they don't require as much space. Sometimes you come across a short wire and this bulky stripper will be a PITA.
One thing to look for in that style of stripper - get the kind with a spring that auto opens. It will save a lot of time and hand effort.
These self stripping doohickeys really only make sense if you're stripping a lot of wires every day.