Update: This deal is still available.
Woot has
48" x 20" SafeRacks Heavy Duty Wall-Mounted Folding Table Collapsible Workbench (500-Lb Capacity, SR-FWT2048-HWB) on sale for
$61.99.
Shipping is free for Amazon Prime Members (must login with your Amazon account and select a shipping address in order for Woot to apply free shipping) or is otherwise $6 per order.
Thanks to Community Member
Croatia for finding this deal.
About this product:- Solid hardwood top finished with a polyurethane coating to provide a durable, long-lasting work surface
- Industrial-grade brackets and hardware provide up to 500 lb weight capacity
- Soft-close damper allows the shelf to gently fold away
- Slim design only extends 3 inches from the wall when folded
- Great for use in your laundry room, dining room, pantry, bedroom, kitchen, dining room, workshop, or garage
- Includes bonus bottle opener
Top Comments
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
50 Comments
Sign up for a Slickdeals account to remove this ad.
Do you think this would work as the hinge for a door hidden in a bookshelf? Like mount vertically in the doorway with the table turned shelf surface facing away from the hidden room?
Our community has rated this post as helpful. If you agree, why not thank h5964f6xa4788120
Everyone is correct that you should go to the hardware store for new hardware. Stripping any screws will be a bad time. I still manage to strip 1 screw going into the wood top from underneath. If you have an impact drill, you will get better results. I switched to impact and the rest of the screws went in without stripping. The rest of the screws besides the stripped one keep it secure enough and it doesn't move.
If you get additional hardware, be sure to not get longer screws for the underside of the wooden top. I got 1/2" too long and it was enough to have a slight bulge on top of the wooden surface. I used washers for the wood screw just so it wouldn't go in as far. It didn't break through, and you can't even see it. If you run your hand over the spots, you can slightly feel it.
You can do the install with 1 person. when you get to the step where you have to screw in the support into the wooden top, you can sit and rest the middle of the board on your head. Make sure you have the opposite support engaged so you aren't resting the entire weight on your head. I had it mounted at 40" up and I was able to sit on the floor, rest the top on my head, and screw it in.
"Measure twice and cut once." Take your time to get the supports plumb and level so you don't have to murder your wall with multiple holes. I took my time and got it right the first time.
Sign up for a Slickdeals account to remove this ad.
I recommend a flush door from your local hardware store. Will probably run you like $120. 1 strong person could easily toss one around. I'm like 130lbs and carrying one around wasn't too bad.
I've done this and tiled them. I have a 160" long x 38" deep 'desktop.'
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!