Slickdeals is community-supported.  We may get paid by brands or deals, including promoted items.
Heads up, this deal has expired. Want to create a deal alert for this item?
expired Posted by DesertGardener | Staff 9 months ago
expired Posted by DesertGardener | Staff 9 months ago

Prime Members: Perlegear Full Motion TV Wall Mount for 37-82" TV's

+ Free Shipping

$23.90

$56

57% off
Amazon
48 Comments 27,037 Views
Visit Amazon
Deal Details
Perlegear via Amazon has for Prime Members: Perlegear Full Motion TV Wall Mount for 37-82" TVs (PGLF12) on sale for $23.91 when you apply promo code 48RCG5YD during checkout. Shipping is free.

Thanks to Staff Member DesertGardener for sharing this deal.

About this Item:
  • Holds up to 110 lbs
  • Fits most 37″–82″ flat or curved TVs with VESA patterns ranging from 200 x 100mm to 600 x 400mm
  • +5°/-15° tilt (no tools needed) to reduce glare, +/-45° swivel to direct the screen toward your position, and +/-3° leveling
  • Extends 16.5" for viewing and retracts back to 2.9" from the wall

Editor's Notes

Written by SaltyOne | Staff

Original Post

Product Info
Community Notes
About the Poster
Deal Details
Product Info
Community Notes
About the Poster
Perlegear via Amazon has for Prime Members: Perlegear Full Motion TV Wall Mount for 37-82" TVs (PGLF12) on sale for $23.91 when you apply promo code 48RCG5YD during checkout. Shipping is free.

Thanks to Staff Member DesertGardener for sharing this deal.

About this Item:
  • Holds up to 110 lbs
  • Fits most 37″–82″ flat or curved TVs with VESA patterns ranging from 200 x 100mm to 600 x 400mm
  • +5°/-15° tilt (no tools needed) to reduce glare, +/-45° swivel to direct the screen toward your position, and +/-3° leveling
  • Extends 16.5" for viewing and retracts back to 2.9" from the wall

Editor's Notes

Written by SaltyOne | Staff

Original Post

Leave a Comment
To participate in the comments, please log in.

Top Comments

In no way am I an engineer but I'd say there's a lot of way ways to overcome this hurdle. Say mount a couple 1x4s across the area you plan to install. Screw them to your studs then screw this to them.
Cut out your sheetrock put 1x4 or 2x4 behind and put the sheetrock back.
Cut a 1/4", 1/2", 3/4" rectangle of plywood to screw to your studs then mount this to that. I included all those sizes because it would depend on the size and weight of the TV you're mounting. Though I personally think 1/4" would be more than enough for even an 85" TV, again, not an engineer.
Alternatively to keep the off wall spacing closer you could do the same using a couple 1" or 2" pieces of flat bar steel. Nearly every TV I've mounted I've had to get creative because the mount missed one or both studs to put the TV where I wanted it.

48 Comments

Sign up for a Slickdeals account to remove this ad.

9 months ago
142 Posts
Joined May 2016
9 months ago
kkm23
9 months ago
142 Posts
See any versions that can support 24" studs near this price?
9 months ago
267 Posts
Joined Nov 2007
9 months ago
topfuel
9 months ago
267 Posts
Quote from kkm23 :
See any versions that can support 24" studs near this price?
Nothing at that price, but the PGLF 16 will handle 24" OC. It's another model made by Perlegear.
9 months ago
7,822 Posts
Joined Jun 2007
9 months ago
Dyscalculic
9 months ago
7,822 Posts
Wish there was one at this price with a single stud mounting for TVs up to 65".
9 months ago
1,806 Posts
Joined Dec 2013
9 months ago
MichaelM3467
9 months ago
1,806 Posts
Quote from kkm23 :
See any versions that can support 24" studs near this price?
To be honest I just installed this a couple weeks ago (bought 9 months ago). You could center it on a stud and use wall anchors. 2 strong lag bolts will hold a LOT of weight even at full extension. The 4 wall anchors at the corner would just give it a little more support.
9 months ago
652 Posts
Joined Nov 2007
9 months ago
far3320
9 months ago
652 Posts
Had a buddy of mine who installed TV professioanlly on people's walls. His test was to do three pullups once mounted to ensure it could hold if a kid or drunk adult pulled on it.
2
5
9 months ago
2,122 Posts
Joined Feb 2006
9 months ago
toneroni
9 months ago
2,122 Posts
Quote from far3320 :
Had a buddy of mine who installed TV professioanlly on people's walls. His test was to do three pullups once mounted to ensure it could hold if a kid or drunk adult pulled on it.
I always hang on my mounts too after installation
9 months ago
952 Posts
Joined Jul 2008
9 months ago
valleypoboy
9 months ago
952 Posts

Our community has rated this post as helpful. If you agree, why not thank valleypoboy

Quote from kkm23 :
See any versions that can support 24" studs near this price?
In no way am I an engineer but I'd say there's a lot of way ways to overcome this hurdle. Say mount a couple 1x4s across the area you plan to install. Screw them to your studs then screw this to them.
Cut out your sheetrock put 1x4 or 2x4 behind and put the sheetrock back.
Cut a 1/4", 1/2", 3/4" rectangle of plywood to screw to your studs then mount this to that. I included all those sizes because it would depend on the size and weight of the TV you're mounting. Though I personally think 1/4" would be more than enough for even an 85" TV, again, not an engineer.
Alternatively to keep the off wall spacing closer you could do the same using a couple 1" or 2" pieces of flat bar steel. Nearly every TV I've mounted I've had to get creative because the mount missed one or both studs to put the TV where I wanted it.
1

Sign up for a Slickdeals account to remove this ad.

9 months ago
604 Posts
Joined Feb 2011
9 months ago
osslickd
9 months ago
604 Posts
Anyone know if there's more coupon codes for other Perlegear mounts? ( other than the default 10% that shows up on the amazon page )
I need a smaller 26-65" : https://www.amazon.com/gp/product...=UTF8&th=1
9 months ago
157 Posts
Joined Nov 2018
9 months ago
Beckles
9 months ago
157 Posts
Quote from far3320 :
Had a buddy of mine who installed TV professioanlly on people's walls. His test was to do three pullups once mounted to ensure it could hold if a kid or drunk adult pulled on it.
Once a tv is actually mounted, the connection between the mount and the wall is not the weak point, the connection between the tv and mount is nowhere near that strong, and having installed a couple of these mounts recently in my house I wouldn't expect these mounts to be able to hold that much weight anyway being full motion. The 65" TCL's I put up with these weigh 31 pounds, I don't need it to support a man doing pullups, nor do I think the 31 pound TCL is engineered to be able to withstand such loads if a drunk man tried that.

Relevant to this post, I would say these appear to be well built mounts with good instructions and good hardware, I would recommend based on my experience.
1
9 months ago
754 Posts
Joined Dec 2007
9 months ago
enzolt
9 months ago
754 Posts
Quote from Beckles :
Once a tv is actually mounted, the connection between the mount and the wall is not the weak point, the connection between the tv and mount is nowhere near that strong, and having installed a couple of these mounts recently in my house I wouldn't expect these mounts to be able to hold that much weight anyway being full motion. The 65" TCL's I put up with these weigh 31 pounds, I don't need it to support a man doing pullups, nor do I think the 31 pound TCL is engineered to be able to withstand such loads if a drunk man tried that.

Relevant to this post, I would say these appear to be well built mounts with good instructions and good hardware, I would recommend based on my experience.
Yeah I agree. No doubt the stud cant support my 175lb but the actual TV mount itself, specced at 100lb or so, definitely cannot hold me. His friend must be anorexic.
9 months ago
1 Posts
Joined Nov 2020
9 months ago
HonestStar6160
9 months ago
1 Posts
Quote from valleypoboy :
In no way am I an engineer but I'd say there's a lot of way ways to overcome this hurdle. Say mount a couple 1x4s across the area you plan to install. Screw them to your studs then screw this to them.
Cut out your sheetrock put 1x4 or 2x4 behind and put the sheetrock back.
Cut a 1/4", 1/2", 3/4" rectangle of plywood to screw to your studs then mount this to that. I included all those sizes because it would depend on the size and weight of the TV you're mounting. Though I personally think 1/4" would be more than enough for even an 85" TV, again, not an engineer.
Alternatively to keep the off wall spacing closer you could do the same using a couple 1" or 2" pieces of flat bar steel. Nearly every TV I've mounted I've had to get creative because the mount missed one or both studs to put the TV where I wanted it.
100% - you attach woods to the studs and attach the mount to the wood. Now, my knowledge is at least 15 years old (from my Circuit City days) but it was once in a blue moon that the studs were where you actually want to mount the tv.
9 months ago
1,483 Posts
Joined Apr 2014
9 months ago
maheeinfy
9 months ago
1,483 Posts
I got this Sanus from Costco. Any reason Sanus is better than this deal?
https://www.costco.com/sanus-pref...41842.html
9 months ago
96 Posts
Joined Jan 2014
9 months ago
1360-Hanger
9 months ago
96 Posts
Quote from MichaelM3467 :
To be honest I just installed this a couple weeks ago (bought 9 months ago). You could center it on a stud and use wall anchors. 2 strong lag bolts will hold a LOT of weight even at full extension. The 4 wall anchors at the corner would just give it a little more support.
This was my thought too but you whipped your thoughtfulness out before I could!
9 months ago
195 Posts
Joined Aug 2015
9 months ago
Rabbitsuit
9 months ago
195 Posts
Quote from enzolt :
Yeah I agree. No doubt the stud cant support my 175lb but the actual TV mount itself, specced at 100lb or so, definitely cannot hold me. His friend must be anorexic.
Am guilty of doing pullups on TV mounts. Can confirm the cheap rocketfish one from Best buy held me up at 165lbs easily.

Sign up for a Slickdeals account to remove this ad.

9 months ago
877 Posts
Joined Jul 2017
9 months ago
init0
9 months ago
877 Posts
No Studs? No Problem

TOGGLER SNAPTOGGLE BB Toggle Anchor.

Found these on yt channel B The Installer.
Hung my (fairly heavy) 55" Frame and 65" 90C.

I -love- these things since I'm 24' studs here too.

And I used this very mount for the 90C (3 toggles on top and bottom; always overbuild)

hth someone
Last edited by init0 February 9, 2024 at 07:14 AM.
1