Sovol has the SV06
Plus 3D printer on sale for $249
$269 (which is $30
$10 below the previous lowest price) instead of $329 with the coupon code
SV06P20 shown in the product picture there. Shipping is free.
It's the same concept as the SV06 with linear bearings on all axes, except the Plus is larger. You can also optionally upgrade it with a Klipper screen.
I've tried and the code also works with the bundles shown there, if you want to order a filament for $10 more or get it with the Klipper screen right away.
Specifications:
- Print volume: 300 x 300 x 340 mm (11.81 x 11.81 x 13.39 in.)
- Print speed up to 150 mm/s
- Print temperature up to 300 °C with all-metal hot end
- Direct drive extruder with planetary gear
- Dual Z-axis and linear bearings
- Automatic print bed leveling and Z-axis auto alignment
- Flexible build platen with PEI coating
- 32-bit silent board
If you want Klipper out of the box, there's also a $100 coupon code (100T300) for the
Comgrow T300 [sovol3d.com] for a final price of $449. The T300 is about the same size as the SV06 Plus, but has a much sturdier frame and linear rails instead of linear rods.
https://www.sovol3d.com/products/...1265827125
16 Comments
Your comment cannot be blank.
Sign up for a Slickdeals account to remove this ad.
SV06 Plus is
$289 to $249 with coupon code
SV06 Plus with Klipper screen is
$349 to $309 with coupon code
We all start somewhere, so no need to apologize. It's awesome that you asked!
A Raspberry Pi Zero 2w is $20. But you'll need a MicroSD card and a USB cable to connect from the pi to the printer. Raspberry Pi imager can download and write Klipper to the MicroSD card (MainsailOS = Klipper with Mansail interface). If you're new, go with the Sovol Klipper Screen, as it's plug and play.