Update: This popular deal is still available.
Eco-Worthy-US via eBay has select
Eco-Worthy LiFePO4 Lithium Iron Phosphate Multi-Purpose Batteries on sale for the prices listed below when you apply
Extra 20% Off coupon code
SPRINGSAVE20 at checkout.
Shipping is free.
Thanks to Deal Hunter
Meowssi for finding this deal.
Examples (prices after code
SPRINGSAVE20):
No Longer Available:
Top Comments
you are misunderstanding the old school ways of setting charge modes and profiles for lead acid batteries. the charge mode and float mode are legacy methods associated with iron core transformers and liner voltage regulators when you needed to physically switch between current levels and voltage levels.
modern chargers current charge up to a taper voltage level then switch to constance voltage mode which is typically 13.5-13.8v. anyway I am sure your understanding is lost in semantic nuances. it's not your fault but I want to help people in the thread understand how it works enough to have the right perceptions.
I won't get into the chemistry but when you put an SLA cell above about 14 ish volts you start to dissociate hydrogen in the electrolyte. That is gas. You may have noticed flooded batts are vented and SLA batteries have pressure release valves built in for this reason to prevent bad things
https://www.batteriespl
Don't tell me to stop. I'm just correcting you erroneous statements I'm not trying to pick on you. I think you are just extrapolating wrong statements from some simple misunderstandings of the electronics and battery systems
Trust an EE PhD as hard as that might be.
have a great day. and happy to direct you to good articles if interested.
The charger in a UPS is designed for SLA will cut off charging when the battery reaches 12.46v and shut off the UPS when the battery drops close to 11.59v. That means the LiFePO will never be full charged or discharged. So in that sense it's safe to use in a UPS.
However because it will keep the battery to SLA specs, you'll only be using approximately 23% of the battery's capacity. So that 10ah LiFePO will behave more like a 2.25ah SLA battery in the UPS.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
168 Comments
Sign up for a Slickdeals account to remove this ad.
Perhaps you are thinking of "top balancing" where you charge batteries in parallel to the same voltage and the connect them in series? In that coinfiguration you typically have a BMS with balancing circuits to maintain close to the same voltage on each battery or cell as they are charged in series.
Anybody have experience with this setup that can share wisdom , much appreciated.
Anybody have experience with this setup that can share wisdom , much appreciated.
Anybody have experience with this setup that can share wisdom , much appreciated.
Sign up for a Slickdeals account to remove this ad.
I also have a dual 10ah battery APC model that I'm considering trying a pair of these eco-worthy but I'm not sure how well these will work in series, ie. if there are any charge balancing issues.
Amazon hasn't had it in stock for awhile. Not sure if Weize will ever carry it again since they seem more targeting car sized 100ah lifepo4 batteries.
I bought it on recommendation of this youtube video
https://www.youtube.com/watch?v=sge3IKW
Yes, it fits in my APC. I think the APC manufacture part is RBC2.
Amazon hasn't had it in stock for awhile. Not sure if Weize will ever carry it again since they seem more targeting car sized 100ah lifepo4 batteries.
I bought it on recommendation of this youtube video
https://www.youtube.com/watch?v=sge3IKW
Yes, it fits in my APC. I think the APC manufacture part is RBC2.
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!