Sunlu has put the two large size 3D printers, the S9 Plus with filament dryer and the S8 Pro, on sale again. Even a bit cheaper this time, with the S9 Plus being priced $10 lower.
The S9 Plus, which includes an S1 Plus filament dryer box, is now available for $189.99, and the older S8 Pro for $118.99. Both printers have a 310x310x400mm build volume.
The S9 Plus comes with auto bed leveling, dual Z-axis, a filament runout and clog detection sensor, a flexible magnetic build plate, and filament dryer integration, allowing the printer to control the filament dryer. The S1 Plus filament dryer box is included with the printer, which has a fan to remove humidity more effectively compared to the standard S1 filament dryer. The dryer box is worth around $30-$40. While not the fastest printer, when properly calibrated, the S9+ should produce nice prints at a reasonable price for its size.
The technical details of the Sunlu S9+:
- Build Volume: 310x310x400mm / 12.2x12.2x15.75in
- Printing Speed: 20-250mm/s
- Printing Accuracy: ± 0.1 mm
- Nozzle Diameter: 0.4mm (replaceable)
- Suggested Materials: 1.75mm PLA, PLA+, carbon fiber, ABS (low temp), PETG, HIPS, WOOD, PCL, TPU
- Operating Noise: ≤ 58 dB
- Nozzle Temperature: ≤ 500 °F / 260 °C
- Heated Bed Temperature: ≤ 212 °F / 100 °C
- Machine Dimension: 600x490x640mm
- Machine Weight: 11.56KGs
- Print From: MicroSD / USB
- Controls: 4.3" Touch Screen Display
- Print Bed: Flexible Magnetic Sheet
- Mainboard: With Silent TMC2208 Stepper Drivers
- Auto Leveling: 4x4 Grid, 3D Touch
- Filament Dryer Integration
- Dual Z-Axis
Link:
https://www.sunlu.com/products/20...6643940438
The S8 Pro, being an older model, lacks auto bed-leveling, so it may not be the best choice for beginners. However, at $119 it could be a cost-effective option for those looking to upgrade to a large-format printer within this price range who would like to upgrade and tinker with it.
The technical details of the Sunlu S8 Pro:
- Build volume: 310x310x400mm / 12.2x12.2x15.75in
- Printing speed: 20-100mm/s
- Printing accuracy: ± 0.1 mm
- Nozzle Diameter: 0.4mm (replaceable)
- Suggested Materials: 1.75mm PLA, PLA+, carbon fiber, ABS (low temp), PETG, HIPS, WOOD, PCL, TPU
- Operating noise: ≤ 58 dB
- Nozzle temperature: ≤ 500 °F / 260 °C
- Heated bed temperature: ≤ 212 °F / 100 °C
- Machine Dimension: 600x490x640mm
- Machine Weight: 10.8KGs
- Print From: MicroSD / USB
- Print Bed: Flexible Magnetic Sheet
https://www.sunlu.com/products/su...3964871962
3 Comments
Your comment cannot be blank.
Sign up for a Slickdeals account to remove this ad.
You could bring them kind of up to the level of a Neptune 4 Plus (which would be the Neptune 4 series printer of this size), but that would require some tinkering. The parts are not that expensive, but I would print a new direct drive toolhead with better part cooling fans and also add a SBC for Klipper.