Walmart has 10' x 1" VELCRO Brand Extreme Outdoor Heavy Duty Tape for $7. Shipping is free w/ Walmart+ (free trial available) or on orders $35+.
Thanks to Deal Hunter TattyBear for finding this deal.
Features:
These industrial strength hook and loop fasteners provide superior holding power with UV resistance for extreme and demanding outdoor applications; safely holds up to 15 pounds
Ideal for use indoors or outdoors, these fasteners have strong staying power even in extreme weather conditions; water and UV resistance keeps them firmly in place during rain, snow, or sweltering heat
This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
Walmart has 10' x 1" VELCRO Brand Extreme Outdoor Heavy Duty Tape for $7. Shipping is free w/ Walmart+ (free trial available) or on orders $35+.
Thanks to Deal Hunter TattyBear for finding this deal.
Features:
These industrial strength hook and loop fasteners provide superior holding power with UV resistance for extreme and demanding outdoor applications; safely holds up to 15 pounds
Ideal for use indoors or outdoors, these fasteners have strong staying power even in extreme weather conditions; water and UV resistance keeps them firmly in place during rain, snow, or sweltering heat
Model: VELCRO Brand Extreme Outdoor Heavy Duty Tape | 10Ft x 1 In | Holds 15 lbs | Black with Stick on Adhesive | Strong Weather Resistant Holding Power - 91843
Deal History
Deal History includes data from multiple reputable stores, such as Best Buy, Target, and Walmart. The lowest price among stores for a given day is selected as the "Sale Price".
Sale Price does not include sale prices at Amazon unless a deal was posted by a community member.
The ratings on weight limits typically have some notes -- like each 1x1 inch holds up to 1 pound of weight, up to a maximum of 15 pounds (with 15 square inches of tape). The surface needs to be scrubbed clean/dry, adhesive needs to be held in place with pressure for 30 seconds against the material and you have to wait 24 hours before attaching both sides of the velcro.
Different materials will always limit that further -- like it might stick great to a piece of sanded wood, but terribly to glossy-painted walls (or bricks) despite them claiming it can be used on "any surface"
I've found for best results:
Scrub the material you want to attach it to thoroughly. Go over it with alcohol wipes to further clean it, let it dry. Attach the adhesive to the material, hold it with pressure for 30-60 seconds. Hit it with a hairdryer or heat gun for 30-60 seconds if it's cold out. Let it sit in place for 1-2 days and then come back to use it after that
The tape is heavy duty, as in nothing will happen to the tape
All kidding aside, I have the strips on various places. My trick usually has been to let the glue set for 24 hours or more before actually using. Even with lightweight items, sucess rate is around 90%. When it fails I just use a VHB double-sided tape.
tried to use on brick wall, cleaned and scrubbed brick face to try and mount blink cam, first try the hook piece fell right off brick with nothing attached. Second try the loop side just could not attach enough to hold without sagging so much it would hold. Not sure how they claim 15lbs.
Our community has rated this post as helpful. If you agree, why not thank TehZombie
Quote
from AmusedDime497
:
I would love to challenge the claim of outdoors and heavy duty 👍
The tape is heavy duty, as in nothing will happen to the tape
All kidding aside, I have the strips on various places. My trick usually has been to let the glue set for 24 hours or more before actually using. Even with lightweight items, sucess rate is around 90%. When it fails I just use a VHB double-sided tape.
Last edited by TehZombie May 10, 2024 at 01:20 PM.
Our community has rated this post as helpful. If you agree, why not thank NSXMK3
Quote
from b862
:
tried to use on brick wall, cleaned and scrubbed brick face to try and mount blink cam, first try the hook piece fell right off brick with nothing attached. Second try the loop side just could not attach enough to hold without sagging so much it would hold. Not sure how they claim 15lbs.
The ratings on weight limits typically have some notes -- like each 1x1 inch holds up to 1 pound of weight, up to a maximum of 15 pounds (with 15 square inches of tape). The surface needs to be scrubbed clean/dry, adhesive needs to be held in place with pressure for 30 seconds against the material and you have to wait 24 hours before attaching both sides of the velcro.
Different materials will always limit that further -- like it might stick great to a piece of sanded wood, but terribly to glossy-painted walls (or bricks) despite them claiming it can be used on "any surface"
I've found for best results:
Scrub the material you want to attach it to thoroughly. Go over it with alcohol wipes to further clean it, let it dry. Attach the adhesive to the material, hold it with pressure for 30-60 seconds. Hit it with a hairdryer or heat gun for 30-60 seconds if it's cold out. Let it sit in place for 1-2 days and then come back to use it after that
Amazon carries a Scotch branded green (color) double-sided Velcro that's very strong. One side hooks, the other loops. Other than fabrics, you need to attach it to...whatever... using contact cement, gorilla glue, etc.
Leave a Comment
Top Comments
Different materials will always limit that further -- like it might stick great to a piece of sanded wood, but terribly to glossy-painted walls (or bricks) despite them claiming it can be used on "any surface"
I've found for best results:
Scrub the material you want to attach it to thoroughly. Go over it with alcohol wipes to further clean it, let it dry. Attach the adhesive to the material, hold it with pressure for 30-60 seconds. Hit it with a hairdryer or heat gun for 30-60 seconds if it's cold out. Let it sit in place for 1-2 days and then come back to use it after that
All kidding aside, I have the strips on various places. My trick usually has been to let the glue set for 24 hours or more before actually using. Even with lightweight items, sucess rate is around 90%. When it fails I just use a VHB double-sided tape.
17 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank TehZombie
All kidding aside, I have the strips on various places. My trick usually has been to let the glue set for 24 hours or more before actually using. Even with lightweight items, sucess rate is around 90%. When it fails I just use a VHB double-sided tape.
Our community has rated this post as helpful. If you agree, why not thank NSXMK3
Different materials will always limit that further -- like it might stick great to a piece of sanded wood, but terribly to glossy-painted walls (or bricks) despite them claiming it can be used on "any surface"
I've found for best results:
Scrub the material you want to attach it to thoroughly. Go over it with alcohol wipes to further clean it, let it dry. Attach the adhesive to the material, hold it with pressure for 30-60 seconds. Hit it with a hairdryer or heat gun for 30-60 seconds if it's cold out. Let it sit in place for 1-2 days and then come back to use it after that
Sign up for a Slickdeals account to remove this ad.
Sign up for a Slickdeals account to remove this ad.
Leave a Comment