expiredTattyBear | Staff posted May 10, 2024 03:58 PM
Item 1 of 5
Item 1 of 5
expiredTattyBear | Staff posted May 10, 2024 03:58 PM
10' x1" Velcro Brand Extreme Outdoor Heavy Duty Tape
$7.00
$21
66% offWalmart
Visit WalmartGood Deal
Bad Deal
Save
Share
Leave a Comment
Top Comments
Different materials will always limit that further -- like it might stick great to a piece of sanded wood, but terribly to glossy-painted walls (or bricks) despite them claiming it can be used on "any surface"
I've found for best results:
Scrub the material you want to attach it to thoroughly. Go over it with alcohol wipes to further clean it, let it dry. Attach the adhesive to the material, hold it with pressure for 30-60 seconds. Hit it with a hairdryer or heat gun for 30-60 seconds if it's cold out. Let it sit in place for 1-2 days and then come back to use it after that
All kidding aside, I have the strips on various places. My trick usually has been to let the glue set for 24 hours or more before actually using. Even with lightweight items, sucess rate is around 90%. When it fails I just use a VHB double-sided tape.
17 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank TehZombie
All kidding aside, I have the strips on various places. My trick usually has been to let the glue set for 24 hours or more before actually using. Even with lightweight items, sucess rate is around 90%. When it fails I just use a VHB double-sided tape.
Our community has rated this post as helpful. If you agree, why not thank NSXMK3
Different materials will always limit that further -- like it might stick great to a piece of sanded wood, but terribly to glossy-painted walls (or bricks) despite them claiming it can be used on "any surface"
I've found for best results:
Scrub the material you want to attach it to thoroughly. Go over it with alcohol wipes to further clean it, let it dry. Attach the adhesive to the material, hold it with pressure for 30-60 seconds. Hit it with a hairdryer or heat gun for 30-60 seconds if it's cold out. Let it sit in place for 1-2 days and then come back to use it after that
Sign up for a Slickdeals account to remove this ad.
Sign up for a Slickdeals account to remove this ad.
Leave a Comment