This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
I got this or a very similar fan on the last deal.
Set up was typical, fan noise is typical maybe even a little less noise than what it replaced.
Airflow is good and the remote offers several options for speed and a reverse button.
The light is terrible in my opinion. It functions fine but feels very dim for the size. I did not check LED density when putting it up but I would imagine is isn't very dense given how little light this thing puts off.
I have a Fanimation fan with the same remote and that is my least favorite most chaotic unresponsive fan that turns on and off randomly to different modes all day long. My other Fanimation fans indoor and outdoor are the best, Covert model 64".
Do I have to get the Westinghouse brand downrod or any brand as long as it's 3/4-inch ID (what does ID means?)?
It comes with a downrod, about 12", if you require a longer one they sell them at home stores. ID means inside diameter, 3/4" is the standard width. Just be careful how low you hang this. These are very large fans with a lot of energy, make sure they're high enough that people won't accidentally stick their arms into the blades.
Last edited by Bluelair July 30, 2024 at 06:14 AM.
2
Like
Helpful
Funny
Not helpful
Sign up for a Slickdeals account to remove this ad.
Yes, it's around 12". I have 2 of them, they work well, I like that the remote receiver is integrated into the chassis, makes installation easier. Assembly is pretty easy, Put the blades on before you hang it, much easier.
Yes, it's around 12". I have 2 of them, they work well, I like that the remote receiver is integrated into the chassis, makes installation easier. Assembly is pretty easy, Put the blades on before you hang it, much easier.
Ugh. I need a fan for my bedroom over my bed. That's too low
I have a Fanimation fan with the same remote and that is my least favorite most chaotic unresponsive fan that turns on and off randomly to different modes all day long. My other Fanimation fans indoor and outdoor are the best, Covert model 64".
Same here! Sometimes I'll wake up and the Fanimation light will be on, the fan on low, the fan on full blast, or anything in between. It has a mind of its own.
Like
Helpful
Funny
Not helpful
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
Top Comments
Set up was typical, fan noise is typical maybe even a little less noise than what it replaced.
Airflow is good and the remote offers several options for speed and a reverse button.
The light is terrible in my opinion. It functions fine but feels very dim for the size. I did not check LED density when putting it up but I would imagine is isn't very dense given how little light this thing puts off.
For my use case I would by this fan again.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
50 Comments
Sign up for a Slickdeals account to remove this ad.
https://electricsupplie
Do I have to get the Westinghouse brand downrod or any brand as long as it's 3/4-inch ID (what does ID means?)?
Sign up for a Slickdeals account to remove this ad.
https://electricsuppliesonline.co...0-spec.pdf [electricsuppliesonline.com]
Do I have to get the Westinghouse brand downrod or any brand as long as it's 3/4-inch ID (what does ID means?)?
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!