expired
Missed This Deal? Get alerts when similar deals are posted.
Deal Details
Was about to pull the trigger on a Sonic Pad for my Ender 3 S1 and then this flash deal popped up for $99:
https://store.creality.
PLUS , you get a 3D Printer Nozzle Kit 0.4mm (5 of them) for free (automatically adds to cart)
AND THEN....
If you use code "AUG15", you get $14.87 off, making it $84.13
HOWEVER... it's free shipping for $99, so if you add a roll of filament to your cart:
https://store.creality.
you're at $102.12, plus tax, free shipping. Good deal, should pair really well with the refurb Ender 3 v3 SE that just made frontpage:
https://slickdeals.net/f/17677482-certified-refurbished-creality-ender-3-v3-se-3d-printer-w-auto-leveling-99-20-free-shipping
https://store.creality.
PLUS , you get a 3D Printer Nozzle Kit 0.4mm (5 of them) for free (automatically adds to cart)
AND THEN....
If you use code "AUG15", you get $14.87 off, making it $84.13
HOWEVER... it's free shipping for $99, so if you add a roll of filament to your cart:
https://store.creality.
you're at $102.12, plus tax, free shipping. Good deal, should pair really well with the refurb Ender 3 v3 SE that just made frontpage:
https://slickdeals.net/f/17677482-certified-refurbished-creality-ender-3-v3-se-3d-printer-w-auto-leveling-99-20-free-shipping
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Was about to pull the trigger on a Sonic Pad for my Ender 3 S1 and then this flash deal popped up for $99:
https://store.creality.
PLUS , you get a 3D Printer Nozzle Kit 0.4mm (5 of them) for free (automatically adds to cart)
AND THEN....
If you use code "AUG15", you get $14.87 off, making it $84.13
HOWEVER... it's free shipping for $99, so if you add a roll of filament to your cart:
https://store.creality.
you're at $102.12, plus tax, free shipping. Good deal, should pair really well with the refurb Ender 3 v3 SE that just made frontpage:
https://slickdeals.net/f/17677482-certified-refurbished-creality-ender-3-v3-se-3d-printer-w-auto-leveling-99-20-free-shipping
https://store.creality.
PLUS , you get a 3D Printer Nozzle Kit 0.4mm (5 of them) for free (automatically adds to cart)
AND THEN....
If you use code "AUG15", you get $14.87 off, making it $84.13
HOWEVER... it's free shipping for $99, so if you add a roll of filament to your cart:
https://store.creality.
you're at $102.12, plus tax, free shipping. Good deal, should pair really well with the refurb Ender 3 v3 SE that just made frontpage:
https://slickdeals.net/f/17677482-certified-refurbished-creality-ender-3-v3-se-3d-printer-w-auto-leveling-99-20-free-shipping
Community Voting
Deal
Score
+16
Good Deal
Bad Deal
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
31 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
I'll be honest, they make a pretty okay printer and I've got two K1 maxes. Ignoring the fact that they're both broken right now, I still think they're great printers but I would not do anything with creality that I couldn't fix myself because they're absolutely useless so much so that I was having, what I thought was one conversation over a month which turned out to be two conversations with two different units and they never informed me of that so while talking to one person they weren't apprised of the other promises that had been made for things and wouldn't honor them. I'd like to say they ended up doing so and realizing what they had done but they didn't. So I'm leaving this message.
The TLDR is I would recommend it at this price.
I bought mine as an "open box" model from crealitys eBay store and used one of those 20% codes to bring the price down to 79$. Well worth it at that price.
It looked like it was opened once and then put away so I was happy with the condition. All of the parts were included like USB cord and different power adapters.
Basically what this pad will do is allow you to rewind the clock on some of your older creality printers. You can remote print via wifi, monitor your printer with a camera and do all the other cool things that come with Klipper.
The only thing I didn't like was I had to buy another cable to connect it to the V3 SE because it uses a serial connection instead of USB but it was less than $10.
There is a bit of a learning curve with this, it isnt as plug and play as creality advertises it and comes with its own set of quirks. But it cuts out the hardest part of a Klipper install which is the compiling of printer specific firmware. This device just does it all automatically for you.
The TLDR is I would recommend it at this price.
I bought mine as an "open box" model from crealitys eBay store and used one of those 20% codes to bring the price down to 79$. Well worth it at that price.
It looked like it was opened once and then put away so I was happy with the condition. All of the parts were included like USB cord and different power adapters.
Basically what this pad will do is allow you to rewind the clock on some of your older creality printers. You can remote print via wifi, monitor your printer with a camera and do all the other cool things that come with Klipper.
The only thing I didn't like was I had to buy another cable to connect it to the V3 SE because it uses a serial connection instead of USB but it was less than $10.
There is a bit of a learning curve with this, it isnt as plug and play as creality advertises it and comes with its own set of quirks. But it cuts out the hardest part of a Klipper install which is the compiling of printer specific firmware. This device just does it all automatically for you.
Sign up for a Slickdeals account to remove this ad.
I'll be honest, they make a pretty okay printer and I've got two K1 maxes. Ignoring the fact that they're both broken right now, I still think they're great printers but I would not do anything with creality that I couldn't fix myself because they're absolutely useless so much so that I was having, what I thought was one conversation over a month which turned out to be two conversations with two different units and they never informed me of that so while talking to one person they weren't apprised of the other promises that had been made for things and wouldn't honor them. I'd like to say they ended up doing so and realizing what they had done but they didn't. So I'm leaving this message.
I don't want to refute you, but that's the truth.
Sign up for a Slickdeals account to remove this ad.
The TLDR is I would recommend it at this price.
I bought mine as an "open box" model from crealitys eBay store and used one of those 20% codes to bring the price down to 79$. Well worth it at that price.
It looked like it was opened once and then put away so I was happy with the condition. All of the parts were included like USB cord and different power adapters.
Basically what this pad will do is allow you to rewind the clock on some of your older creality printers. You can remote print via wifi, monitor your printer with a camera and do all the other cool things that come with Klipper.
The only thing I didn't like was I had to buy another cable to connect it to the V3 SE because it uses a serial connection instead of USB but it was less than $10.
There is a bit of a learning curve with this, it isnt as plug and play as creality advertises it and comes with its own set of quirks. But it cuts out the hardest part of a Klipper install which is the compiling of printer specific firmware. This device just does it all automatically for you.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!