Eco-Worthy-US via eBay has
Eco-Worthy 12V 100AH LiFePO4 Lithium Battery BMS 4000+ Cycles For RV Solar Panel w/ Bluetooth Monitoring for
$164.79 after applying coupon code
BRANDNEW20 at checkout.
Shipping is free.
Thanks to Community Member
dealsalways for finding this deal.
Features:- Bluetooth Real-Time Monitoring
- 10-year life & 4000+ cycle
- High Charging Speed
- Lightweight & Easy Installation
- Capacity Expansion
Top Comments
BTW, this is working out great so far. App, charging to 100% . Testing out other pieces for my setup, including the charger, inverter and an ATS (Automatic Transfer Switch). My goal is to have a large backup for all my network/miniPC/POECameras etc which total under 100W. Regular UPSes can go 10-30min but this 1200Wh should last 15+ hours.
First thought I could get away with using a UPS as charger/inverter based on some advice and googling. This is a clear NoGo! I bricked a couple of APC / Cyberpower UPSes learning this the hard way. UPS innards are just not meant for this kind of sustained use by design, it looks like. So I'm now sure I'll have one regular UPS first, and then have this big battery behind it.
So I need some charger + inverter and ideally some (doesn't have to be super-fast) ATS . And trying to minimize power loss and noise since the network closet is somewhat near to living areas. I can also schedule/turn on/off the charger with Zwave switches.
Tested a few different components, but likely will end up with some of these:
https://www.amazon.com/gp/product/B0989XPZ48 - good all-in-one, but quite big and I might want to keep the system totally quiet when Utility main power ON (99% of days)
https://www.amazon.com/gp/product/B07JMW8MMR/ (decent cost/quality inverter. No good choices cheaper?? )
https://www.amazon.com/gp/product...7R4J/?th=1 (Inverter + ATS . not cheap, but no other options in a low price range)
Chargers:
https://www.ebay.com/itm/145738293273
https://www.ebay.com/itm/176520795134 (says has ETL cert, but not sure.. seller sent certificate image, not sure if the model numbers match)
https://www.amazon.com/dp/B0BWSDS4S1?th=1 (trying it out, this is dead cheap and works too.. but mostly will go for the bigger ones above)
ATS: (this seems to be a bit short of good/cheap options. But some of these seem workable, especially since being behind a real UPS, transfer speed doesn't really have to be that fast)
https://www.amazon.com/gp/product/B0C9CFQMPJ/?th=1
https://www.amazon.com/gp/product/B004S5Y158/
https://www.amazon.com/gp/product/B0CXPFTCVL/ [amazon.com]
However you need an inverter to do 12v dc to 110v ac
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
62 Comments
Sign up for a Slickdeals account to remove this ad.
What is the name of the app for the bms?
Our community has rated this post as helpful. If you agree, why not thank
However you need an inverter to do 12v dc to 110v ac
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
BTW, this is working out great so far. App, charging to 100% . Testing out other pieces for my setup, including the charger, inverter and an ATS (Automatic Transfer Switch). My goal is to have a large backup for all my network/miniPC/POECameras etc which total under 100W. Regular UPSes can go 10-30min but this 1200Wh should last 15+ hours.
First thought I could get away with using a UPS as charger/inverter based on some advice and googling. This is a clear NoGo! I bricked a couple of APC / Cyberpower UPSes learning this the hard way. UPS innards are just not meant for this kind of sustained use by design, it looks like. So I'm now sure I'll have one regular UPS first, and then have this big battery behind it.
So I need some charger + inverter and ideally some (doesn't have to be super-fast) ATS . And trying to minimize power loss and noise since the network closet is somewhat near to living areas. I can also schedule/turn on/off the charger with Zwave switches.
Tested a few different components, but likely will end up with some of these:
https://www.amazon.com/gp/product/B0989XPZ48 - good all-in-one, but quite big and I might want to keep the system totally quiet when Utility main power ON (99% of days)
https://www.amazon.com/gp/product/B07JMW8MMR/ (decent cost/quality inverter. No good choices cheaper?? )
https://www.amazon.com/gp/product...7R4J/?th=1 (Inverter + ATS . not cheap, but no other options in a low price range)
Chargers:
https://www.ebay.com/itm/145738293273
https://www.ebay.com/itm/176520795134 (says has ETL cert, but not sure.. seller sent certificate image, not sure if the model numbers match)
https://www.amazon.com/dp/B0BWSDS4S1?th=1 (trying it out, this is dead cheap and works too.. but mostly will go for the bigger ones above)
ATS: (this seems to be a bit short of good/cheap options. But some of these seem workable, especially since being behind a real UPS, transfer speed doesn't really have to be that fast)
https://www.amazon.com/gp/product/B0C9CFQMPJ/?th=1
https://www.amazon.com/gp/product/B004S5Y158/
https://www.amazon.com/gp/product/B0CXPFTCVL/ [amazon.com]
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!