Home Depot has
DEWALT 15 Amp Corded 8-1/4 in. Compact Jobsite Table Saw and Compact Table Saw Stand (DWE7485WDW7451) for
$299.
Shipping is free or select free store pickup where available.
Thanks to community member
newview for finding this deal.
Note: Availability for pickup may vary by location
About this item:
- Compact size for ease of transportation and storage
- Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate
- 24.5 in. of rip capacity for ripping 4x8 plywood or OSB sheets
- Power-loss reset prevents accidental re-starts following a power disruption when the tool is left in the on position
- Blade brake
- On-board storage for guard, fence, wrenches and miter gauge
- Metal roll cage base for jobsite durability
- Site-pro modular guarding system allows for tool free adjustments of the guarding
- DW7451 - heavy-duty tube steel construction provides the strength you need for safe operation
- DW7451 - support bar hardware holes for secure fastening of saw to the stand
- DW7451 - designed for use with the DW7480 compact job site table saw, DCS7485 60-Volt table saw and DW745 compact table saw
- DW7451 - lightweight for easy storage and transport
- DW7451 - backed by a 3-year limited warranty
- DW7451 - folds flat for easy handling
Leave a Comment
21 Comments
Sign up for a Slickdeals account to remove this ad.
Thanks for the deal!
https://www.homedepot.com/p/DEWALT-15-Amp-Corded-10-in-Job-Site-Table-Saw-with-Rolling-Stand-DWE7491... [homedepot.com]
Sign up for a Slickdeals account to remove this ad.
https://www.homedepot.com/p/DEWALT-15-Amp-Corded-10-in-Job-Site-Table-Saw-with-Rolling-Stand-DWE7491... [homedepot.com]
I had one for a couple of years before getting a SawStop CTS. Of course I got the SawStop because of the flesh sensing, but other than that it's only a marginally better saw than this one, even though it's three times the price of this deal (the bevel adjustment has a microadjuster, the rack and pinion is nicer to lock and a few other minor things are an improvement).
The rack and pinion fence on this saw is awesome. I can't imagine every going back to a non-rack-and-pinion fence on a jobsite saw.
Note that this saw has a 8-1/4" blade, not a 10". However, I personally found very few situations when the lower capacity was limiting. In fact, the smaller blade means it doesn't bog down with regular use like many 10" jobsite saws do (including the SawStop). This also means it's runs fine on a 15A circuit without ever tripping it (in my experience).
Sign up for a Slickdeals account to remove this ad.
Leave a Comment