frontpage Posted by LovelyCheetah | Staff • Nov 15, 2024
Nov 15, 2024 7:49 PM
Item 1 of 8
Item 1 of 8
frontpage Posted by LovelyCheetah | Staff • Nov 15, 2024
Nov 15, 2024 7:49 PM
Osaki Os-Pro 4D Encore Full Body Compression Massage Chair (Black)
+ Free Shipping$1,999
$5,999
66% offClearanceChair
Get Deal at ClearanceChairGood Deal
Bad Deal
Save
Share
Leave a Comment
Top Comments
116 Comments
Sign up for a Slickdeals account to remove this ad.
Does the Osaki Pro Encore have arm rests or any other parts that come off easily to make it easier to get through doors in narrow hallways? It fits in the room but I'm worried about clearing a corner
Curious to know your overall experience so far with the chair and if it's worth the investment? I'm torn between this vs the Titan 3d chairs.
https://osakiusa.com/products/osa...5n3rTFs-5F
From 7,999 to 2,499. I feel like it's always 2499
Our community has rated this post as helpful. If you agree, why not thank speeddman
Edit: They said they would send new legs section, but went silent since then. Not the way to treat customers.
Simple answer - on auto, I don't believe you can control force. On manual though, you can enter a mode (for instance, my favorite mode below), and then press MENU and hit the 4d button near the bottom of your controller, you will see the line grow as you press the button, indicating larger force.
Experience with chair: I've tried more expensive ones in the store, they don't have anything extra worth the money. This chair is likely worth it. My calf pressure bags were dead on arrival though when this was shipped to me last month, and OsakiTitan support (the website you would be buying this from via the slickdeals link) told me to "check the air hose inside the char" like I'm a mechanic and going to spend 20 hours taking apart a $2,000 chair I just bought, sending me no instructional video or anything, then literally stopped emailing me when I asked for more instructions than just that sentence they sent me. So ya.. there's that? I mainly care about the back massage. And this thing's 4D setting allows you to push the rollers further into your back. So as a 160lb guy, relatively very fit, this thing is amazing. I haven't used my Theragun Pro since buying this. So that may tell you something.
Spent nearly 30 hours in this char and this is by far the BEST feeling setting. Press these buttons in literal order:
Power
Down to manual
Ok
Right
Sync
Ok
Menu
Down to manual
Ok
Down to speed
Right
Down to 6
Ok
Menu
Physically lift your finger and press the physical "4D" button near the bottom of the control to your desired setting (you can click it like 4 times for 4 different intensity levels)
Menu
Down to manual
Down to Part
Right
Scroll to "Point" and click OK. then press up and down adjust arrows on top right of remote to make the rollers move up and down your back, or let go to let it sit on your neck/etc.
And also adjust your chair to lay down backwards
If I were to buy this again, I likely would go through costco. I don't like the experience I had with this seller. You don't ship broken shit then leave the customer screwed. This is bad business.
Sign up for a Slickdeals account to remove this ad.
Per previous comment on page 6
"Email - [email protected] | she will send the invoice for WhiteGlove fee $250.
We removed it because sometimes, there could be a surcharge if they need a thirdman, remote area, house is too narrow. attempt fee, redelivery fee or storage fee. This is not all the time, and its case by case. But if you do email her, with your order number, she will help setup."
Simple answer - on auto, I don't believe you can control force. On manual though, you can enter a mode (for instance, my favorite mode below), and then press MENU and hit the 4d button near the bottom of your controller, you will see the line grow as you press the button, indicating larger force.
Experience with chair: I've tried more expensive ones in the store, they don't have anything extra worth the money. This chair is likely worth it. My calf pressure bags were dead on arrival though when this was shipped to me last month, and OsakiTitan support (the website you would be buying this from via the slickdeals link) told me to "check the air hose inside the char" like I'm a mechanic and going to spend 20 hours taking apart a $2,000 chair I just bought, sending me no instructional video or anything, then literally stopped emailing me when I asked for more instructions than just that sentence they sent me. So ya.. there's that? I mainly care about the back massage. And this thing's 4D setting allows you to push the rollers further into your back. So as a 160lb guy, relatively very fit, this thing is amazing. I haven't used my Theragun Pro since buying this. So that may tell you something.
Spent nearly 30 hours in this char and this is by far the BEST feeling setting. Press these buttons in literal order:
Power
Down to manual
Ok
Right
Sync
Ok
Menu
Down to manual
Ok
Down to speed
Right
Down to 6
Ok
Menu
Physically lift your finger and press the physical "4D" button near the bottom of the control to your desired setting (you can click it like 4 times for 4 different intensity levels)
Menu
Down to manual
Down to Part
Right
Scroll to "Point" and click OK. then press up and down adjust arrows on top right of remote to make the rollers move up and down your back, or let go to let it sit on your neck/etc.
And also adjust your chair to lay down backwards
If I were to buy this again, I likely would go through costco. I don't like the experience I had with this seller. You don't ship broken shit then leave the customer screwed. This is bad business.
Thanks so much! This is super helpful!
Simple answer - on auto, I don't believe you can control force. On manual though, you can enter a mode (for instance, my favorite mode below), and then press MENU and hit the 4d button near the bottom of your controller, you will see the line grow as you press the button, indicating larger force.
Experience with chair: I've tried more expensive ones in the store, they don't have anything extra worth the money. This chair is likely worth it. My calf pressure bags were dead on arrival though when this was shipped to me last month, and OsakiTitan support (the website you would be buying this from via the slickdeals link) told me to "check the air hose inside the char" like I'm a mechanic and going to spend 20 hours taking apart a $2,000 chair I just bought, sending me no instructional video or anything, then literally stopped emailing me when I asked for more instructions than just that sentence they sent me. So ya.. there's that? I mainly care about the back massage. And this thing's 4D setting allows you to push the rollers further into your back. So as a 160lb guy, relatively very fit, this thing is amazing. I haven't used my Theragun Pro since buying this. So that may tell you something.
Spent nearly 30 hours in this char and this is by far the BEST feeling setting. Press these buttons in literal order:
Power
Down to manual
Ok
Right
Sync
Ok
Menu
Down to manual
Ok
Down to speed
Right
Down to 6
Ok
Menu
Physically lift your finger and press the physical "4D" button near the bottom of the control to your desired setting (you can click it like 4 times for 4 different intensity levels)
Menu
Down to manual
Down to Part
Right
Scroll to "Point" and click OK. then press up and down adjust arrows on top right of remote to make the rollers move up and down your back, or let go to let it sit on your neck/etc.
And also adjust your chair to lay down backwards
If I were to buy this again, I likely would go through costco. I don't like the experience I had with this seller. You don't ship broken shit then leave the customer screwed. This is bad business.
I am assuming to get it repaired/serviced you've to ship it back and pay for it? I think the tax free benefit plus price is great and given Costco is almost $1k more expensive, I might give this company a try!
Thanks
Sign up for a Slickdeals account to remove this ad.
Leave a Comment