expired Posted by gabe23111 • Mar 21, 2025
Mar 21, 2025 4:22 PM
Item 1 of 2
Item 1 of 2
expired Posted by gabe23111 • Mar 21, 2025
Mar 21, 2025 4:22 PM
Prime Members: 4-Pack 1KG 1.75mm Sunlu Silk PLA Plus 3D Printer Filament
+ Free Shipping$45
$52
13% offAmazon
Visit AmazonGood Deal
Bad Deal
Save
Share
Leave a Comment
22 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank gabe23111
That depends on your expectations and your model. Sometimes you have to slow down the outer wall to 100, or slower, to get a lot more shine. Try default silk settings, and if it's not to your liking, adjust. This is how 3D printing works.
Shows 53.99
Shows 53.99
Sign up for a Slickdeals account to remove this ad.
I've also used a ton of Sunlu regular PLA, PLA+, and more recently the PLA+2.0. I just run all of them with the Standard Bambu Lab PLA Basic profile. I've tested the generic profile, and even custom profiles, but the stock Bambu PLA Basic profile works just as good as anything else for me.
I had such good results with the PLA+2.0 that when they finally had most of the colors in stock on their website, I ordered 10kg in various colors. With a small discount they came out to under $14/spool with free shipping, which was surprisingly quick as well.
One important note, they look good, especially the red, but be aware the blue is a bit lighter than I was expecting. Definitely more on the sky blue end of the spectrum.
If you want the best results, slow down the outer layers (first, top, outside) to 30 m/s. Makes the print longer but you'll get that shininess. Happy printing!
Also, I looked at a few reviews and one of them said you need a harden hot end to use this set.
Sign up for a Slickdeals account to remove this ad.
Leave a Comment