populargabe23111 posted Sep 09, 2025 02:00 PM
Item 1 of 8
Item 1 of 8
populargabe23111 posted Sep 09, 2025 02:00 PM
10-Pack 1KG ELEGOO Rapid PLA+ 1.75mm 3D Printer Filament $100 + free s/h
$100
$160
37% offGood Deal
Bad Deal
Save
Share
Get Deal at Retailer
Deal Details
@Elegoo
I believe this is the lowest they have gone on their site for the Rapid PLA+. This is more per KG than some of the recent Ali deals, but IMO this is one of the better PLA's and I use it almost exclusively along with their PLA +.
I believe this is the lowest they have gone on their site for the Rapid PLA+. This is more per KG than some of the recent Ali deals, but IMO this is one of the better PLA's and I use it almost exclusively along with their PLA +.
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
@Elegoo
I believe this is the lowest they have gone on their site for the Rapid PLA+. This is more per KG than some of the recent Ali deals, but IMO this is one of the better PLA's and I use it almost exclusively along with their PLA +.
I believe this is the lowest they have gone on their site for the Rapid PLA+. This is more per KG than some of the recent Ali deals, but IMO this is one of the better PLA's and I use it almost exclusively along with their PLA +.
Community Voting
Deal Score
+17
Good Deal
Bad Deal
Popular Deals
View All$35$4216% offWiha 38050 14 Piece Insulated Screw Driver -- Amazon - $35
2
There is no voting data on this thread
$540$5999% off$539.99*: 8TB WD_BLACK SN850X NVMe PCIe 4.0 Internal Gaming SSD + 10% Back w/ Prime Visa Card at Amazon
3
There is no voting data on this thread
United Airlines MileagePlus Members & New Instacart Members 5000 Bonus Points on First 4 Orders **Link Acct**
0
There is no voting data on this thread
$10$2458% off4-Pk Clifford The Big Red Dog Chicken Jerky Dog Treats $10.05 w/ S&S + Free Shipping w/ Prime or $35+ Orders
3
There is no voting data on this thread
$15$3050% offSidon: The Legend of Zelda Series - amiibo $14.99
0
There is no voting data on this thread
Trending Deals
View All$11Joseph Joseph 2 Piece Cleaning Brush Set for KItchen and Bathroom $10.59 after Coupon on Amazon
2
There is no voting data on this thread
Kohl's Card holders - $15 Bonus for members YMMV -check email
10
There is no voting data on this thread
Thomasville Maya Queen Size Sleeper Sofa $1500. Reg $2000. F/S from Costco.
2
There is no voting data on this thread
$132$20836% off$132:Crucial P510 2TB Gen5 NVMe SSD, Up to 10,000 MB/s, PCIe 5.0 M.2 2280 SSD, Internal Solid State Drive, Compatible with Laptop, Desktop, +Acronis Software - CT2000P510SSD8-01
2
There is no voting data on this thread
Leave a Comment
12 Comments
Sign up for a Slickdeals account to remove this ad.
Are you 100% sure Deplee is the same? I did try a couple rolls a little while back when I saw them in the $10-$12 range. My experience was not great with it. Honestly, part of the reason I tried it is because it looked the same as Elegoo based on their packaging/pictures lol.
While I likely haven't been printing as long as you and many others, I did/do kind of go filament crazy and am up to 220+ unique ones on my spreadsheet. For anything under the Polymaker price range, Elegoo Rapid PLA followed by their PLA+ have been my top choices for PLA. I do like Sunlu/Jayo as well in the budget territory but their colors are a bit muted compared to Elegoo.
I mean, if you could get colors without black and white and if you needed 10 kg, sure. But forcing you to get mostly black and white makes it mediocre since you can get 2 kg of black for 25 cents more a kg and 2 kg of white for 50 cents more a kg from Amazon all day, from Deeplee brand. Which is exactly the same filament. I'd rather just get the 2 pack instead of paying more now for a very very small discount and having to store it.
I added more colors. Didn't see them initially as they were under a different link.
Are you 100% sure Deplee is the same? I did try a couple rolls a little while back when I saw them in the $10-$12 range. My experience was not great with it. Honestly, part of the reason I tried it is because it looked the same as Elegoo based on their packaging/pictures lol.
While I likely haven't been printing as long as you and many others, I did/do kind of go filament crazy and am up to 220+ unique ones on my spreadsheet. For anything under the Polymaker price range, Elegoo Rapid PLA followed by their PLA+ have been my top choices for PLA. I do like Sunlu/Jayo as well in the budget territory but their colors are a bit muted compared to Elegoo.
Sign up for a Slickdeals account to remove this ad.
I mean, if you could get colors without black and white and if you needed 10 kg, sure. But forcing you to get mostly black and white makes it mediocre since you can get 2 kg of black for 25 cents more a kg and 2 kg of white for 50 cents more a kg from Amazon all day, from Deeplee brand. Which is exactly the same filament. I'd rather just get the 2 pack instead of paying more now for a very very small discount and having to store it.
I added more colors. Didn't see them initially as they were under a different link.
Are you 100% sure Deplee is the same? I did try a couple rolls a little while back when I saw them in the $10-$12 range. My experience was not great with it. Honestly, part of the reason I tried it is because it looked the same as Elegoo based on their packaging/pictures lol.
While I likely haven't been printing as long as you and many others, I did/do kind of go filament crazy and am up to 220+ unique ones on my spreadsheet. For anything under the Polymaker price range, Elegoo Rapid PLA followed by their PLA+ have been my top choices for PLA. I do like Sunlu/Jayo as well in the budget territory but their colors are a bit muted compared to Elegoo.
Leave a Comment