frontpagetDames | Staff posted Sep 30, 2025 09:18 PM
Item 1 of 4
Item 1 of 4
frontpagetDames | Staff posted Sep 30, 2025 09:18 PM
B-Stock: ARCTIC Liquid Freezer III AIO CPU Water Coolers (Various)
+ Free S/H $100+from $38
$76
eBay
Get Deal at eBayGood Deal
Bad Deal
Save
Share
Leave a Comment
11 Comments
Sign up for a Slickdeals account to remove this ad.
Picked up a 420 on the last B stock deal. Still can't figure out why they labeled it B-Stock. It had everything in the box and looked brand new.
If you need it, go for it.
Picked up a 420 on the last B stock deal. Still can't figure out why they labeled it B-Stock. It had everything in the box and looked brand new.
If you need it, go for it.
Picked up a 420 on the last B stock deal. Still can't figure out why they labeled it B-Stock. It had everything in the box and looked brand new.
If you need it, go for it.
Note some reviews state the III's pump is a bit louder than the II, so if noise is a factor, you may want to consider staying on the II.
#2 For anyone building in a small case I would stay away from this. I tried installing this (240mm) in the Cooler Master Qube 500 and the tubes were stiff, difficult to work with and look terrible because the are so long. I ended up putting it in a larger case & it's was perfect.
Now with an H9 Flow case. I can't add a vertical GPU mount. Because of the clearance to the AC hoses.
Sign up for a Slickdeals account to remove this ad.
My issue with Arctic Cooling is the hoses. They get in the way on certain setups. So check comments about that. I had to return my NZXT H6 Flow due to the radiator didn't get enough clearance from the motherboards heat sink in the top left corner. Now with an H9 Flow case. I can't add a vertical GPU mount. Because of the clearance to the AC hoses.
Interesting, I was able to fit this in my smaller H5 Flow on top. Where were you trying to mount it?
The radiator clearance issue was the gigabyte aorus elite X motherboard. If you see it. The heatsink is greatly oversized on the top left.
#2 For anyone building in a small case I would stay away from this. I tried installing this (240mm) in the Cooler Master Qube 500 and the tubes were stiff, difficult to work with and look terrible because the are so long. I ended up putting it in a larger case & it's was perfect.
Leave a Comment