Item 1 of 2
Item 1 of 2
frontpagePoohbiwon posted Oct 15, 2025 1:51 PM
Elegoo Centauri Carbon 3D Printer
$280
$300
6% off
+ Shipping (from $30)at ELEGOO
+ Shipping (from $30)at ELEGOODeal Details
ELEGOO has its Elegoo Centauri Carbon 3D Printer for $299.99 - $20 when you apply discount code EDCCM5U at checkout = $279.99. Shipping costs start from $30 (may vary by location).
Thanks to community member Poohbiwon for sharing this deal.
Features:
Thanks to community member Poohbiwon for sharing this deal.
Features:
- Print Right Out of the Box
- Full-Auto Calibration
- CoreXY with 500 mm/s Velocity
- 20,000 mm/s² Acceleration
- Unleash Creativity with Every Filament
- Chamber Camera Acts as Your Eyes
- Build Volume 256 Ă— 256 Ă— 256 mm
Editor's Notes
Written by qwikwit | Staff- This price is $20 less than the previous Frontpage Deals.
- Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
ELEGOO has its Elegoo Centauri Carbon 3D Printer for $299.99 - $20 when you apply discount code EDCCM5U at checkout = $279.99. Shipping costs start from $30 (may vary by location).
Thanks to community member Poohbiwon for sharing this deal.
Features:
Thanks to community member Poohbiwon for sharing this deal.
Features:
- Print Right Out of the Box
- Full-Auto Calibration
- CoreXY with 500 mm/s Velocity
- 20,000 mm/s² Acceleration
- Unleash Creativity with Every Filament
- Chamber Camera Acts as Your Eyes
- Build Volume 256 Ă— 256 Ă— 256 mm
Editor's Notes
Written by qwikwit | Staff- This price is $20 less than the previous Frontpage Deals.
- Please see the original post for additional details & give the WIKI and additional forum comments a read for helpful discussion.
Community Voting
Deal Score
+36
Good Deal
Bad Deal
Found by pennysave
Forum Thread
45% off
Found by phoinix
Forum Thread
57% off
Found by phoinix
Forum Thread
60% off
Found by jk6812
Forum Thread
42% off
Found by jk6812
Forum Thread
13% off
Found by jk6812
Forum Thread
30% off
Found by pennysave
Forum Thread
50% off
Found by htp182
Forum Thread
45% off
Top Comments
Long story short, it started clogging from day 1. No matter what I did and how many times I unclogged it, it would continue to clog. It took about 3 months to get the issue fixed. To be fair though, a lot of those 3 months were me being out of the country and/or not feeling like dealing with a clogged printer.
Credit to Elegoo's customer service who were pretty good about helping out. They sent me a replacement extruder at no cost, which didn't help with the clogging issue. They ended up sending me the entire printer head and that finally fixed the problem. Now that it's working, I have to say at times it prints better than my P1S.
Would I suggest this printer? Yeah if you aren't a total noob to 3D printing. If you are and just want the most minimal hassle, I suggest waiting for a sale and spending a little bit more for a Bambu.
They also use sketchy "pre-order" tactics- they claim special pre-order pricing, but it never changes. This printer was supposedly $299 during preorder with a "retail" price of $500, yet it's still $299 months later. Apparently, all their printers follow the same pricing gimmick.
Not sure if that saves anyone money or if they would send you the same, or any, offer, but if your are considering this printer then maybe try adding one to your cart and wait a day or two to see if they send an offer. Mine was before the announcement of V2 as well so they may be getting even more aggressive with the discounts to clear out inventory.
edit: this is the specific listing I used to add to my cart ... https://ebay.us/m/GZPYnh
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
77 Comments
Sign up for a Slickdeals account to remove this ad.
And I am sure there are other things that I am not taking into consideration that would maybe stand out to some more experienced printers.
Wondering if y'all have any suggestions on where to start here, I'm trying to end up in the $500 range but obviously don't mind more investment if it'll really count.
Our community has rated this post as helpful. If you agree, why not thank BilboMcBaggins69
They also use sketchy "pre-order" tactics- they claim special pre-order pricing, but it never changes. This printer was supposedly $299 during preorder with a "retail" price of $500, yet it's still $299 months later. Apparently, all their printers follow the same pricing gimmick.
Our community has rated this post as helpful. If you agree, why not thank dvdrdiscs
Long story short, it started clogging from day 1. No matter what I did and how many times I unclogged it, it would continue to clog. It took about 3 months to get the issue fixed. To be fair though, a lot of those 3 months were me being out of the country and/or not feeling like dealing with a clogged printer.
Credit to Elegoo's customer service who were pretty good about helping out. They sent me a replacement extruder at no cost, which didn't help with the clogging issue. They ended up sending me the entire printer head and that finally fixed the problem. Now that it's working, I have to say at times it prints better than my P1S.
Would I suggest this printer? Yeah if you aren't a total noob to 3D printing. If you are and just want the most minimal hassle, I suggest waiting for a sale and spending a little bit more for a Bambu.
Sign up for a Slickdeals account to remove this ad.
And I am sure there are other things that I am not taking into consideration that would maybe stand out to some more experienced printers.
Wondering if y'all have any suggestions on where to start here, I'm trying to end up in the $500 range but obviously don't mind more investment if it'll really count.
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank igotcheese21
They also use sketchy "pre-order" tactics- they claim special pre-order pricing, but it never changes. This printer was supposedly $299 during preorder with a "retail" price of $500, yet it's still $299 months later. Apparently, all their printers follow the same pricing gimmick.
If you need AMS today, look elsewhere but if you aren't worried about AMS, it makes a great beginner printer.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!