Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.
popularjk6812 | Staff posted Today 05:45 AM
  1. Deal Image
Item 1 of 6
  1. Deal Image
  2. Deal Image
  3. Deal Image
  4. Deal Image
Item 1 of 6
popularjk6812 | Staff posted Today 05:45 AM

KINGROON 22LBS PETG or PLA filament 3D Printer Filament 10 Rolls 1KG 1.75MM (Black) $56.XX + Free S/H

$56

$241

76% off
AliExpress
19 Comments 1,361 Views
Get Deal at AliExpress
Good Deal
Save
Share
Deal Details
KINGROON 3D Store via AliExpress [aliexpress.com] has KINGROON 22LBS PETG or PLA filament 3D Printer Filament 10 Rolls 1KG 1.75MM (Black) on sale for $68.XX - $12 extra off w/ promo code AEUS12 = $56.XX. Shipping is free.

Note: This item ships from a U.S. warehouse. Price may fluctuate slightly due to currency exchange and may vary per item. You must be signed into your AliExpress account and input your shipping address to add items to your cart and place an order. To add your address, go to Settings via the drop-down menu at the top of the page, then select Shipping Address.

For expedited customer service, please email: [email protected]
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
KINGROON 3D Store via AliExpress [aliexpress.com] has KINGROON 22LBS PETG or PLA filament 3D Printer Filament 10 Rolls 1KG 1.75MM (Black) on sale for $68.XX - $12 extra off w/ promo code AEUS12 = $56.XX. Shipping is free.

Note: This item ships from a U.S. warehouse. Price may fluctuate slightly due to currency exchange and may vary per item. You must be signed into your AliExpress account and input your shipping address to add items to your cart and place an order. To add your address, go to Settings via the drop-down menu at the top of the page, then select Shipping Address.

For expedited customer service, please email: [email protected]

Community Voting

Deal Score
+9
Good Deal
Get Deal at AliExpress

Leave a Comment

Unregistered (You)

19 Comments

Sign up for a Slickdeals account to remove this ad.

Today 03:23 PM
729 Posts
Joined Aug 2017
StewbeZToday 03:23 PM
729 Posts
Mix B is never at this price point I want that damn purple lol
Today 03:24 PM
15,107 Posts
Joined Aug 2005
LiquidRetroToday 03:24 PM
15,107 Posts
Ya filament isn't sold or listed by the pound..... Tell me your not into 3D Printing without telling me your not into 3D Printing.

Solid filament brand in my experience
Today 03:32 PM
76 Posts
Joined Dec 2015
mlschermerToday 03:32 PM
76 Posts
Quote from StewbeZ :
Mix B is never at this price point I want that damn purple lol
I mean, $66 for the mix b is still a pretty dang good price.
Today 03:44 PM
2,144 Posts
Joined May 2004
WraazerToday 03:44 PM
2,144 Posts
Not a bad price if you don't mind the speed difference compared to their HS PETG or PLA. I get 3x faster speed out of their HS stuff, with just as good of a print, and usually get it for around 80 bucks. I know that's about 60% more, but for me the 300% speed difference is worth it.
Today 03:46 PM
204 Posts
Joined May 2020
Jersy19Today 03:46 PM
204 Posts
Quote from Wraazer :
Not a bad price if you don't mind the speed difference compared to their HS PETG or PLA. I get 3x faster speed out of their HS stuff, with just as good of a print, and usually get it for around 80 bucks. I know that's about 60% more, but for me the 300% speed difference is worth it.
I run normal petg at full speed using a rapid profile with no issues. I get the same results as hs branded.
Today 04:07 PM
2,144 Posts
Joined May 2004
WraazerToday 04:07 PM
2,144 Posts
Quote from Jersy19 :
I run normal petg at full speed using a rapid profile with no issues. I get the same results as hs branded.
How fast are you running? I am at 300mm/s, and HS right now is less than 80 bucks, but I just bought a ton of it for that during this same sale. Running 275C nozzles and 75C bed, but could not get the speed from the regular even after drying forever. Not doubting you, but if it works I may look to get this when HS is not on sale.
Today 04:16 PM
2,144 Posts
Joined May 2004
WraazerToday 04:16 PM
2,144 Posts
Quote from Wraazer :
How fast are you running? I am at 300mm/s, and HS right now is less than 80 bucks, but I just bought a ton of it for that during this same sale. Running 275C nozzles and 75C bed, but could not get the speed from the regular even after drying forever. Not doubting you, but if it works I may look to get this when HS is not on sale.
I am new to this, and don't want to be giving bad advice, but was going from personal experience. So if I can get it to work, then I'll know better and can give better advice.

Sign up for a Slickdeals account to remove this ad.

Today 04:16 PM
204 Posts
Joined May 2020
Jersy19Today 04:16 PM
204 Posts
Quote from Wraazer :
How fast are you running? I am at 300mm/s, and HS right now is less than 80 bucks, but I just bought a ton of it for that during this same sale. Running 275C nozzles and 75C bed, but could not get the speed from the regular even after drying forever. Not doubting you, but if it works I may look to get this when HS is not on sale.
I run a centauri carbon and use the default rapid petg profile. It's 300 to 500. 250/70... Most of the hs, hf, etc labeling is just marketing to charge more. I always but petg when it's around 10 or less a roll..I think the machine might have something to do with it. Mines a core xy where I think a bed slinger might give different results... I would say get a cheap roll of black sunlu or kingroon petg and run it and see the results on your machine
Today 04:18 PM
204 Posts
Joined May 2020
Jersy19Today 04:18 PM
204 Posts
Quote from Wraazer :
How fast are you running? I am at 300mm/s, and HS right now is less than 80 bucks, but I just bought a ton of it for that during this same sale. Running 275C nozzles and 75C bed, but could not get the speed from the regular even after drying forever. Not doubting you, but if it works I may look to get this when HS is not on sale.
Try 250 not 275 and try your results with normal petg at least. IV never run any petg at that high a temp.
Today 04:20 PM
2,144 Posts
Joined May 2004
WraazerToday 04:20 PM
2,144 Posts
Quote from Jersy19 :
I run a centauri carbon and use the default rapid petg profile. It's 300 to 500. 250/70... Most of the hs, hf, etc labeling is just marketing to charge more. I always but petg when it's around 10 or less a roll..I think the machine might have something to do with it. Mines a core xy where I think a bed slinger might give different results... I would say get a cheap roll of black sunlu or kingroon petg and run it and see the results on your machine
I am running Kobra S1s, with Ace Pros. So enclosed CoreXY, heated chambers when needed with extra mini heaters, hardened steel or sapphire nozzles, and upgrades to the feeders for better feeding, but can't get anywhere near that speed with the regular. I can get around 150 at the most, but only at .2mm layer heights. I have a Sunlu E2 and an E4 dryer for drying and annealing. Waiting in the Kobra S1 Max to pay off after the 25th, and then for it to drop.

As a side note, for the newest printer I didn't go with the Centauri because they were giving up on the multifuliment feeder, but Elegoo's filiment is some of the best I have used.
Today 04:25 PM
204 Posts
Joined May 2020
Jersy19Today 04:25 PM
204 Posts
Quote from Wraazer :
I am running Kobra S1s, with Ace Pros. So enclosed CoreXY, heated chambers when needed with extra mini heaters, hardened steel or sapphire nozzles, and upgrades to the feeders for better feeding, but can't get anywhere near that speed with the regular. I can get around 150 at the most, but only at .2mm layer heights. I have a Sunlu E2 and an E4 dryer for drying and annealing. Waiting in the Kobra S1 Max to pay off after the 25th, and then for it to drop.

As a side note, for the newest printer I didn't go with the Centauri because they were giving up on the multifuliment feeder, but Elegoo's filiment is some of the best I have used.
That's odd. I'm running a stock rapid petg profile. All my temps are 250 for petg though the 275 will be probably be to hot for it. Maybe try a test print with an elegoo, sunlu or kingroon rapid petg print profile. 250/70. Mine is printing good with .08 later lines to .2...IV even used the same for my .2mm nozzle
Today 04:27 PM
2,144 Posts
Joined May 2004
WraazerToday 04:27 PM
2,144 Posts
Quote from Jersy19 :
Try 250 not 275 and try your results with normal petg at least. IV never run any petg at that high a temp.
The HS box calls for up to 280, and I had used the regular, and did the calibration tower in steps of 5C, and 275 seemed to be the sweet spot after doing speed runs and test prints. Used the same profile I got for the 150 from the regular one for the HS, but could bump the speed to 300.
Today 04:31 PM
2,144 Posts
Joined May 2004
WraazerToday 04:31 PM
2,144 Posts
Quote from Jersy19 :
That's odd. I'm running a stock rapid petg profile. All my temps are 250 for petg though the 275 will be probably be to hot for it. Maybe try a test print with an elegoo, sunlu or kingroon rapid petg print profile. 250/70. Mine is printing good with .08 later lines to .2...IV even used the same for my .2mm nozzle
Will try it out after these prints finish. Not new to printers entirely, just to owning and running them. I have modeled, programmed and g-coded for plastics, resin and metal sinter machines at work, just didn't own my own.
Today 04:40 PM
204 Posts
Joined May 2020
Jersy19Today 04:40 PM
204 Posts
Quote from Wraazer :
Will try it out after these prints finish. Not new to printers entirely, just to owning and running them. I have modeled, programmed and g-coded for plastics, resin and metal sinter machines at work, just didn't own my own.
They are very independent like people lol. Some need more attention then others iv noticed lol
1

Sign up for a Slickdeals account to remove this ad.

Today 05:07 PM
2,144 Posts
Joined May 2004
WraazerToday 05:07 PM
2,144 Posts
Quote from Jersy19 :
They are very independent like people lol. Some need more attention then others iv noticed lol
Ya they are. Always willing to learn, and know of I am not getting the most out of whatever I am doing. So if your way works I learned something new. Small about that. May be downside of life, but always time to learn.

Leave a Comment

Unregistered (You)

Related Searches

ComputersPrinters3D PrintersFree ShippingOccasionsBlack FridayCyber Monday

Popular Deals

See All
Found by idk_then
Today 04:44 PM
$29$8565% off8-Quart The Cellar Stainless Steel Oval Roaster w/ Rack & Lid $28.99 + Free Pickup at Macys or Free Shipping on $39+
0
Found by StrongMoney163
Today 01:53 PM
$26$10074% offWORKPRO 3.7V Electric Precision Screwdriver Set, 52-in-1 Cordless Mini Driver Kit at Walmart $26
1
Found by Frugie
Today 01:17 PM
$11$11.40 2-Pack HomeHacks 75L Collapsible Laundry Baskets (Gradient Grey) Amazon
1
Found by das1984
Nov 14, 2025 10:19 PM
$470$55014% offHisense 10.2 cu. ft. Garage Ready Frost Free Convertible Upright Freezer with Seal Break Handle $469.99
6
Found by Rokket
Today 03:31 PM
$7.88$2467% off6-Piece Husky 1/4" Drive Impact Driver Socket Adapter Set $7.88 + Free Shipping
0

Trending Deals

See All
Found by NeatBuffalo362
Yesterday 06:13 PM
YMMV: Papa John's - DOWNLOAD THE APP and GET $10 IN PAPA DOUGH®
38
Found by kenmikec
Today 12:04 PM
$20LEGO Star Wars Death Trooper & Night Trooper Battle Pack 75412 +$3.50 WM Cash $19.99
1
Found by Geckohands
Today 04:26 PM
$279Staples (in-store only): Apple iPad A16 11", 128GB, blue (11th Gen) $279 YMMV
1
Found by phoinix
Today 02:47 PM
$170$35051% off$169.99*: Beats Studio Pro Wireless Bluetooth Noise Cancelling Headphones at Amazon
2
Found by Ohsighrus
Today 03:22 PM
$44$8145% off$44.25 Liquid Freezer 360mm AIO with 2.4" LCD Screen (Lightning Deal)
2