Tri-band WiFi 7 speeds up to 9.4 Gbps MLO and 4K-QAM
AI-powered Smart AiMesh boosts coverage up to 5800 sq.ft. (2pk) and easy extendibility with compatible ASUS routers for seamless and secure whole home WiFi
Seven internal antennas and eight high-power front-end modules eliminates WiFi dead zones
24/7 end-to-end protection with commercial-grade AiProtection Pro and advanced VPNs
This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
Tri-band WiFi 7 speeds up to 9.4 Gbps MLO and 4K-QAM
AI-powered Smart AiMesh boosts coverage up to 5800 sq.ft. (2pk) and easy extendibility with compatible ASUS routers for seamless and secure whole home WiFi
Seven internal antennas and eight high-power front-end modules eliminates WiFi dead zones
24/7 end-to-end protection with commercial-grade AiProtection Pro and advanced VPNs
ASUS ZenWiFi BT6 is a tri band WiFi 7 mesh kit that stands out for flexible three unit coverage and easy setup. The three identical units can each run as a standalone router, and the mesh can be split up or reset for separate use. In practice, the system has delivered instant device connections, stable wireless backhaul, strong whole home coverage, and solid performance for a 4K camera far from the nearest node. The main drawbacks are the 2.5G WAN port only, 1G LAN and wired backhaul limits, plus firmware related stability complaints and live TV buffering. It fits best for homes around 1 gig or less.
Homes with gigabit-or-slower internet, because the BT6 is described as fine up to 1 Gbps and avoids paying for extra 2.5 GbE capacity you cannot use.
Households replacing an older mesh system, because the three nodes can connect instantly and deliver stable wireless backhaul with strong whole-home coverage.
It is best suited for up to about 1 Gbps. The BT6 has only one 2.5G WAN port while the other ports are 1G, so it can bottleneck faster service; the BT8 is the better choice for internet speeds up to 2.5 Gbps.
The BT6 can work, but reported firmware problems have caused connectivity issues, buffering, and inconsistent speed-test results. It may be worth buying only with a good return policy if you want to try Wi‑Fi 7 mesh now.
Yes. All three BT6 units are identical, and the set comes pre-paired with two units preset for mesh use. The mesh units can reportedly be factory reset and used individually as standalone routers.
Yes. A 3-pack has been used with wireless MLO backhaul in a roughly 2,000 sq ft home with nodes about 35 ft apart, and it provided strong coverage even to a 4K camera about 95 ft away. It also supports creating an IoT network for smart devices.
One is the base station, so no you can't split it up
They come pre-paired and two units are already preset to work as mesh units. However if its anything like the previous Zen models you can factory reset the mesh units and use them as standalone routers.
Our community has rated this post as helpful. If you agree, why not thank
The problem with this router is that its WAN port is the only 2.5G port, whereas all other ports are 1G.
Its wired backhaul is also limited to 1G and does not support advanced VLAN.
If you aim to leverage all Wi-Fi 7 features, this router is not it. It can provide Wi-Fi 7 support, but with a bottleneck.
Other than these, the router is a decent upgrade if you are stuck in really outdated hardware.
The problem with this router is that its WAN port is the only 2.5G port, whereas all other ports are 1G.
Its wired backhaul is also limited to 1G and does not support advanced VLAN.
If you aim to leverage all Wi-Fi 7 features, this router is not it. It can provide Wi-Fi 7 support, but with a bottleneck.
Other than these, the router is a decent upgrade if you are stuck in really outdated hardware.
Wow, is like you prewrote my own comment.
Like
Helpful
Funny
Not helpful
Sign up for a Slickdeals account to remove this ad.
Anyone have recommendations for a set up since I need an upgrade for my 1 Gig upgrade ? My routers are super old. I need a new set up where the main router must be in the garage since that's where the comcast cable at along with ethernets main hub for the house. AP is upstairs, you think this unit is the best ?
The problem with this router is that its WAN port is the only 2.5G port, whereas all other ports are 1G.
Its wired backhaul is also limited to 1G and does not support advanced VLAN.
If you aim to leverage all Wi-Fi 7 features, this router is not it. It can provide Wi-Fi 7 support, but with a bottleneck.
Other than these, the router is a decent upgrade if you are stuck in really outdated hardware.
I agree 100%! If someone has internet service greater than 1GB I recommend they upgrade to the BT8. That gets them two 2.5GB ports (and two 1GB ports), total of 4 ports on each router and the mesh node(s). If someone needs to connect more than two 2.5GB devices to a BT8 node they will need a 2.5GB switch. But at least it will let you fully take advantage of internet speeds up to 2.5GB.
Anyone have recommendations for a set up since I need an upgrade for my 1 Gig upgrade ? My routers are super old. I need a new set up where the main router must be in the garage since that's where the comcast cable at along with ethernets main hub for the house. AP is upstairs, you think this unit is the best ?
Unclear from your post if you will be upgrading to 1gig or if you are moving from 1gig to faster speed. I think the BT6 is OK up to 1 gig, but the BT8 set is better as it'll support internet speeds up to 2.5GB.
Unclear from your post if you will be upgrading to 1gig or if you are moving from 1gig to faster speed. I think the BT6 is OK up to 1 gig, but the BT8 set is better as it'll support internet speeds up to 2.5GB.
Thanks for the clarification. If my house roughly 1800 sq ft between upstairs/downstairs. I assume I need 1 main, 2 mesh to cover the area. Yes I have 1 gig speed internet from comcast and wanted to take advantage of it. Currently running ac1900
Asus has major problems with this product. Their tech support line has a recording saying that they have known connectivity problems because of a firmware glitch. Well after spending an hour on the phone, I have the new firmware and did get internet connection now but it is causing buffering and hangs continually on live TV streaming. Never a problem before this equipment was installed. They have more problems than I want to deal with. Also, their internet speed test is showing that I am getting 500Mbps. Ookla Speed test consistently shows 200-300Mbps. This is at least a two fold increase in internet speed from what I was getting with my old router but the connection is not consistent at all. So just because there is a huge download increase in speed, this router and node cannot stream live TV as well as my old router which has WiFi 4 (802.11n).
Two TP-Link AXE5400 Tri-Band WiFi 6E Router (Archer AXE75)
vs.
Two ASUS ZenWiFi BT6
Which mesh is better? Any drawback with the OneMesh from TP-Link? I heard that it is slow to connect to the near router when the device move from place to place.
Please help advise. Thanks.
Like
Helpful
Funny
Not helpful
Sign up for a Slickdeals account to remove this ad.
Thanks for the clarification. If my house roughly 1800 sq ft between upstairs/downstairs. I assume I need 1 main, 2 mesh to cover the area. Yes I have 1 gig speed internet from comcast and wanted to take advantage of it. Currently running ac1900
Yes, you'd need at least two units. A router and a mesh. But based on what MaroonCabbage737 mentioned you might want to skip this set as ASUS seems to have issues with WiFi 7 mesh at the moment. May take time for them to get the firmware bugs fixed.
Quote
from MaroonCabbage737
:
Asus has major problems with this product. Their tech support line has a recording saying that they have known connectivity problems because of a firmware glitch. Well after spending an hour on the phone, I have the new firmware and did get internet connection now but it is causing buffering and hangs continually on live TV streaming. Never a problem before this equipment was installed. They have more problems than I want to deal with. Also, their internet speed test is showing that I am getting 500Mbps. Ookla Speed test consistently shows 200-300Mbps. This is at least a two fold increase in internet speed from what I was getting with my old router but the connection is not consistent at all. So just because there is a huge download increase in speed, this router and node cannot stream live TV as well as my old router which has WiFi 4 (802.11n).
Thanks for the note and sharing your experience. Based on this folks may want to consider ASUS's WiFi 6 or WiFi 6E mesh products instead. They are more stable.
Quote
from ducnse
:
Two TP-Link AXE5400 Tri-Band WiFi 6E Router (Archer AXE75)
vs.
Two ASUS ZenWiFi BT6
Which mesh is better? Any drawback with the OneMesh from TP-Link? I heard that it is slow to connect to the near router when the device move from place to place.
Please help advise. Thanks.
Based on what MaroonCabbage737 shared you could consider ASUS WiFi 6/6E mesh products instead. If you must have WiFi 7, you could try Netgear or TP-Link.
1
Like
Helpful
Funny
Not helpful
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
Community Reviews
ASUS ZenWiFi BT6 is a tri band WiFi 7 mesh kit that stands out for flexible three unit coverage and easy setup. The three identical units can each run as a standalone router, and the mesh can be split up or reset for separate use. In practice, the system has delivered instant device connections, stable wireless backhaul, strong whole home coverage, and solid performance for a 4K camera far from the nearest node. The main drawbacks are the 2.5G WAN port only, 1G LAN and wired backhaul limits, plus firmware related stability complaints and live TV buffering. It fits best for homes around 1 gig or less.
Common Questions (4)
AI-generated summary based on comments from the community. Updated ago
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
22 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank
Our community has rated this post as helpful. If you agree, why not thank
Its wired backhaul is also limited to 1G and does not support advanced VLAN.
If you aim to leverage all Wi-Fi 7 features, this router is not it. It can provide Wi-Fi 7 support, but with a bottleneck.
Other than these, the router is a decent upgrade if you are stuck in really outdated hardware.
Its wired backhaul is also limited to 1G and does not support advanced VLAN.
If you aim to leverage all Wi-Fi 7 features, this router is not it. It can provide Wi-Fi 7 support, but with a bottleneck.
Other than these, the router is a decent upgrade if you are stuck in really outdated hardware.
Sign up for a Slickdeals account to remove this ad.
Hi friend
Its wired backhaul is also limited to 1G and does not support advanced VLAN.
If you aim to leverage all Wi-Fi 7 features, this router is not it. It can provide Wi-Fi 7 support, but with a bottleneck.
Other than these, the router is a decent upgrade if you are stuck in really outdated hardware.
vs.
Two ASUS ZenWiFi BT6
Which mesh is better? Any drawback with the OneMesh from TP-Link? I heard that it is slow to connect to the near router when the device move from place to place.
Please help advise. Thanks.
Sign up for a Slickdeals account to remove this ad.
vs.
Two ASUS ZenWiFi BT6
Which mesh is better? Any drawback with the OneMesh from TP-Link? I heard that it is slow to connect to the near router when the device move from place to place.
Please help advise. Thanks.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!