This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
Our community has rated this post as helpful. If you agree, why not thank energyx
Quote
from caotico
:
What does replacing the LEDs entail?
More than most are willing to do. Pull the outer frame (some screws and a ton of clips), remove the LCD panel, remove the filter/light disbursement layers, pull glued thin plastic/paper, then pull and replace each strip. You'll also want a set of suction pullers to move the screen and filters around.
The LEDs were ~$30 from eBay and even though only the left side had failed strips, I had to replace them all because the originals were a bit warmer in color. I only paid $200 brand new in 2022, but it probably had less than 100 hours on it, so it was more of a challenge/project that worked out in the end. Pictures attached.
More than most are willing to do. Pull the outer frame (some screws and a ton of clips), remove the LCD panel, remove the filter/light disbursement layers, pull glued thin plastic/paper, then pull and replace each strip. You'll also want a set of suction pullers to move the screen and filters around.
The LEDs were ~$30 from eBay and even though only the left side had failed strips, I had to replace them all because the originals were a bit warmer in color. I only paid $200 brand new in 2022, but it probably had less than 100 hours on it, so it was more of a challenge/project that worked out in the end. Pictures attached.
More than most are willing to do. Pull the outer frame (some screws and a ton of clips), remove the LCD panel, remove the filter/light disbursement layers, pull glued thin plastic/paper, then pull and replace each strip. You'll also want a set of suction pullers to move the screen and filters around.
The LEDs were ~$30 from eBay and even though only the left side had failed strips, I had to replace them all because the originals were a bit warmer in color. I only paid $200 brand new in 2022, but it probably had less than 100 hours on it, so it was more of a challenge/project that worked out in the end. Pictures attached.
More than most are willing to do. Pull the outer frame (some screws and a ton of clips), remove the LCD panel, remove the filter/light disbursement layers, pull glued thin plastic/paper, then pull and replace each strip. You'll also want a set of suction pullers to move the screen and filters around.The LEDs were ~$30 from eBay and even though only the left side had failed strips, I had to replace them all because the originals were a bit warmer in color. I only paid $200 brand new in 2022, but it probably had less than 100 hours on it, so it was more of a challenge/project that worked out in the end. Pictures attached.Puller kit I used: https://www.amazon.com/dp/B0FF92N3R3LED tester (to confirm bad strips): https://www.amazon.com/dp/B0BZ83F4WV
Leave a Comment
8 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank energyx
Our community has rated this post as helpful. If you agree, why not thank energyx
The LEDs were ~$30 from eBay and even though only the left side had failed strips, I had to replace them all because the originals were a bit warmer in color. I only paid $200 brand new in 2022, but it probably had less than 100 hours on it, so it was more of a challenge/project that worked out in the end. Pictures attached.
Puller kit I used: https://www.amazon.com/dp/B0FF92N3R3
LED tester (to confirm bad strips): https://www.amazon.com/dp/B0BZ83F4WV
The LEDs were ~$30 from eBay and even though only the left side had failed strips, I had to replace them all because the originals were a bit warmer in color. I only paid $200 brand new in 2022, but it probably had less than 100 hours on it, so it was more of a challenge/project that worked out in the end. Pictures attached.
Puller kit I used: https://www.amazon.com/dp/B0FF92N3R3
LED tester (to confirm bad strips): https://www.amazon.com/dp/B0BZ83F4WV
The LEDs were ~$30 from eBay and even though only the left side had failed strips, I had to replace them all because the originals were a bit warmer in color. I only paid $200 brand new in 2022, but it probably had less than 100 hours on it, so it was more of a challenge/project that worked out in the end. Pictures attached.
Puller kit I used: https://www.amazon.com/dp/B0FF92N3R3
LED tester (to confirm bad strips): https://www.amazon.com/dp/B0BZ83F4WV
Sign up for a Slickdeals account to remove this ad.
Leave a Comment