@Elegoo
You can mix and match colors from the links below as long as your total is 10 x1Kg spools.
Apply coupon
IMEPLA2 at checkout. You can mix and match colors.
Note: Elegoo is also running a promo by 5 get one free or buy 10 get one free which will work on other filaments of theirs as well. That coupon is auto applied but you can override it with the coupon
IMEPLA2 and it will come out $5 less for the PLA+ when buying 10 spools.
Based on my testing and experience with multiple PLA brands, their PLA+ has given me the most consistent & clean prints in regards to PLA. I'm not factoring in PLA-CF or Matte filaments.
Sea Green and Space Grey are the two that I really like.
Available options:
Leave a Comment
18 Comments
Sign up for a Slickdeals account to remove this ad.
I have over 200 rolls of various PLA at home, and this is easily the best of the bunch. Have you seen it for sub $10 where you can choose your own colors?
Don't get me wrong, I will at times buy some of the cheaper stuff for prototypes, specific colors elegoo doesn't have or where I don't need optimal quality.
The blanket posts "$10 for PLA is not a deal" are getting tiring even though it's generally just two people.
Sign up for a Slickdeals account to remove this ad.
A good deal on PLA is around $8-$9 and especially the lower end cost in bulk.
A good deal on PLA is around $8-$9 and especially the lower end cost in bulk.
I've tried a bunch and found I like these the best. Has the smallest footprint of the ones I've tried and requires no drilling in to walls. If printing multiples side by side, someone created little plastic clips (one of the profiles on the page) connecting them that make it sturdier.
I'm looking to buy more filament but not sure why I would pay more than I did for the Jayo for this. What makes it better exactly? In what scenario will I find out the hard way with the cheaper filaments?
Sign up for a Slickdeals account to remove this ad.
Define "good brand". Almost all filament comes out of just a few factories, just rebranded. Out of hundreds of spools of filament I've only ever had a problem with one brand. Want to guess what brand it was? Truth is, problems with _any_ brands will happen. There are no more problems with discounted brands then there are with larger brands (just bigger marketing budgets). They are all also the same quality.
A good deal on PLA is around $8-$9 and especially the lower end cost in bulk.
Leave a Comment