BuyDig via eBay has (Certified Klipsch Refurbished)
Klipsch R-41SA Dolby Atmos Elevation Surround Speaker Set (pair) on sale for
$133.
Shipping is free.
Thanks to community member
SickerDealer for finding this deal.
Features:- Dolby Atmos add-on speakers
- Designed to sit on top of floor-standing front or back speakers
- Drivers are angled up to reflect sound off the ceiling, for a heightened soundstage and overhead effects
- Connect to a Dolby Atmos compatible receiver's height channels
- Can also be used as wall-mounted standard surround speakers
- 90° x 90° Tractrix horn with 1" LTS (Linear Travel Suspension) aluminum tweeter
- 4" spun copper IMG (injection-molded graphite) woofer
- Acoustic suspension (sealed) cabinet design
- Frequency response: conforms to Dolby Atmos specification
- Impedance: 8 ohms compatible
- Sensitivity: conforms to Dolby Atmos specification
- Power handling: up to 50 watts RMS (100 watts peak)
- MDF cabinet with durable textured wood grain vinyl finish
- Anti-vibration rubber feet and built-in keyhole slot wall-mounting brackets (mounting screws not included)
- Gold-plated binding post speaker terminals
- 5-3/4"W x 7"H x 13"D
- Weight: 6 lbs. each
Leave a Comment
Top Comments
https://a.co/d/0hYPnwGS
15 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank wtfbrowtf
Our community has rated this post as helpful. If you agree, why not thank Eragorn
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank BrightFlower9146
Our community has rated this post as helpful. If you agree, why not thank sqa4life
https://a.co/d/0hYPnwGS
Most are saying you dont even need to match the center channel anymore.
The only speakers that really need to be voice-matched (same brand/line) are your front three - left, center, and right. That's because sound pans across them constantly (dialogue, effects moving across the screen), and mismatched speakers can make those transitions noticeable.
Matching your surrounds is good, too, but it matters less, and your height/Atmos speakers matter even less because they're mostly handling ambient and directional effects, so differences in tone aren't nearly as obvious.
So from a sound perspective, it's totally fine to mix brands for heights. Matching everything is great for aesthetics and consistency, not a necessity.
General opinion since there are many other factors to consider with all this.
1st, technically there isn't a height position for Atmos.
These are designed for one of the positions, Atmos enabled modules.
Like these, sometimes they're designed(or used) for dual purpose, as height/surround positions.
This position was originally designed as an alternative for people that can't/won't do overhead(in ceiling) positions.
Which is the ideal way of doing it.
As far as matching, yes it's ideal.
No different than the reasons people say the LCRs should.
If you look at how the object based codecs works, it should make sense.
In short, it makes for an easier/better seamless integration.
Just as important is the quality of ALL speakers in the setup.
For the same reasons as above.
Since object based codecs(Atmos/DTS:X) work in conjunction with legacy codecs.
I would suggest improving/upgrading your fronts & maybe a 2nd subwoofer before upgrading to Atmos.
Especially if you're going to use the alternative or height position.
Sign up for a Slickdeals account to remove this ad.
Leave a Comment