TIANWAN via Amazon has Tilswall 1000mL Shark600 Ultra-light Electric Paint Sprayer w/ 3 Nozzles & 3 Spray Patterns for $49.99 - $23 when you apply promo code VJDGH9CC at checkout = $26.99. Shipping is free.
Note: Amazon promo codes don't always apply seamlessly. If you run into this issue, refresh the page, re-enter the code, or revisit the cart page.
Thanks to Slickdeals Staff f12_26 for sharing this deal.
This collaborative space allows users to contribute additional information, tips, and insights to enhance the original deal post. Feel free to share your knowledge and help fellow shoppers make informed decisions.
TIANWAN via Amazon has Tilswall 1000mL Shark600 Ultra-light Electric Paint Sprayer w/ 3 Nozzles & 3 Spray Patterns for $49.99 - $23 when you apply promo code VJDGH9CC at checkout = $26.99. Shipping is free.
Note: Amazon promo codes don't always apply seamlessly. If you run into this issue, refresh the page, re-enter the code, or revisit the cart page.
Thanks to Slickdeals Staff f12_26 for sharing this deal.
I have 4 different Tilswall models: cheap $20 gun sprayer with power cord, cordless gun sprayer that uses a DeWalt 20V battery, the Shark 800 and the other model similar to the Shark 800 that is 1 step down which doesn't have the side refill port and only comes with 3 nozzles vs 4. They all work a lot better than you'd expect for their prices. The Shark 800 is the only one I use now since it produces the most air pressure and most even spray, and I bought 3 of them when they were on sale for $40/ea because I called the company and they don't sell replacement nozzles or any spare parts at all so I wanted to have backup parts or whole units when 1 finally fails. 3 @ $40/ea was only $120 total and these will probably last me over 10 years of occasional use, vs my Wagner which was around $400 and has barely higher air pressure but only came with a single nozzle lol! I sprayed 4 gallons of relatively thick PlastiDip on my car with the Shark 800 as well as it's similar model without the side refill port and both worked great, got nice even spray pattern since it produces quite good pressure to atomize all the fairly thick PlastiDip pretty well. The thinner your paint/stain/etc the less pressure you'll need to atomize it correctly so if this sprays PlastiDip well, it will spray anything thinner even better. If you're spraying latex paint you'll probably want to thin it about 50/50 water/paint since latex is like pudding and no sprayer will really spray paint that thick, or if it does manage to spray it, it won't spray evenly when it is that thick.
Anyone who knows about sprayers in general could weigh in? I've used rollers and am only half decent and am looking to paint 3 bedrooms. Am guessing a sprayer would significantly cut total time and may even speed up the cleanup process and shoot I'm hoping I can use it to waterproof my deck in the fall.
Would this particular one be good for those uses? Tired of buying expensive name brand only to use sparingly, when I keep hearing from trusted friends that the cheaper versions (including t*mu) are worth the 90% saving even if I have to replace one a few years down
Thanks SD community
Our community has rated this post as helpful. If you agree, why not thank SeriousPartner345
Quote
from Whatitgottabetusbery
:
Anyone who knows about sprayers in general could weigh in? I've used rollers and am only half decent and am looking to paint 3 bedrooms. Am guessing a sprayer would significantly cut total time and may even speed up the cleanup process and shoot I'm hoping I can use it to waterproof my deck in the fall.
Would this particular one be good for those uses? Tired of buying expensive name brand only to use sparingly, when I keep hearing from trusted friends that the cheaper versions (including t*mu) are worth the 90% saving even if I have to replace one a few years down
Thanks SD community
Never used a sprayer to paint walls, nap rollers and good lights have done it. For your molding I think this might help, I've also sprayed ceilings but that's flat paint
Our community has rated this post as helpful. If you agree, why not thank HeyGuysChrisFixHere
Quote
from Whatitgottabetusbery
:
Anyone who knows about sprayers in general could weigh in? I've used rollers and am only half decent and am looking to paint 3 bedrooms. Am guessing a sprayer would significantly cut total time and may even speed up the cleanup process and shoot I'm hoping I can use it to waterproof my deck in the fall.
Would this particular one be good for those uses? Tired of buying expensive name brand only to use sparingly, when I keep hearing from trusted friends that the cheaper versions (including t*mu) are worth the 90% saving even if I have to replace one a few years down
Thanks SD community
I have 4 different Tilswall models: cheap $20 gun sprayer with power cord, cordless gun sprayer that uses a DeWalt 20V battery, the Shark 800 and the other model similar to the Shark 800 that is 1 step down which doesn't have the side refill port and only comes with 3 nozzles vs 4. They all work a lot better than you'd expect for their prices. The Shark 800 is the only one I use now since it produces the most air pressure and most even spray, and I bought 3 of them when they were on sale for $40/ea because I called the company and they don't sell replacement nozzles or any spare parts at all so I wanted to have backup parts or whole units when 1 finally fails. 3 @ $40/ea was only $120 total and these will probably last me over 10 years of occasional use, vs my Wagner which was around $400 and has barely higher air pressure but only came with a single nozzle lol! I sprayed 4 gallons of relatively thick PlastiDip on my car with the Shark 800 as well as it's similar model without the side refill port and both worked great, got nice even spray pattern since it produces quite good pressure to atomize all the fairly thick PlastiDip pretty well. The thinner your paint/stain/etc the less pressure you'll need to atomize it correctly so if this sprays PlastiDip well, it will spray anything thinner even better. If you're spraying latex paint you'll probably want to thin it about 50/50 water/paint since latex is like pudding and no sprayer will really spray paint that thick, or if it does manage to spray it, it won't spray evenly when it is that thick.
Anyone who knows about sprayers in general could weigh in? I've used rollers and am only half decent and am looking to paint 3 bedrooms. Am guessing a sprayer would significantly cut total time and may even speed up the cleanup process and shoot I'm hoping I can use it to waterproof my deck in the fall.
Would this particular one be good for those uses? Tired of buying expensive name brand only to use sparingly, when I keep hearing from trusted friends that the cheaper versions (including t*mu) are worth the 90% saving even if I have to replace one a few years down
Thanks SD community
I haven't used this model yet, but I'd assume this Shark600 Ultralight will have moderately lower pressure than the Shark800 but it will probably be slightly better than their cheap $20 standard size corded gun sprayer, and it comes with 3 nozzles like most of their models so it should work for most viscosity liquids up to maybe latex paint thinned 50/50 with water. You might have to thin it to 40% paint & 60% water depending on how much less pressure this creates vs the 4 models i've used.
Our community has rated this post as helpful. If you agree, why not thank Importdude
clean CLEAN CLEAN these ones are fixed so beware cleaning the internals you have to keep it angled down.
works pretty good but if you spray alot or the weather is hot the paint will dry and the tips will clog.
after it did that multiple times i went out to get the basic wagner at home depot
its much better and you can separate the motor/fan from the nozzle so you can clean it easier!
You can get an airless sprayer at harbor freight, for less than $300 with everything you need. I've had this one https://www.harborfreight.com/air...57042.html for 4 years and use it 4 or 5 times a year. Yes you can paint much more quickly BUT you have to mask well and control over spray so a lot more time is required there and cleanup. You need to flush the gun, hose and pump thoroughly. For large area painting hard to beat airless, with a wand extension and a single floor building, no ladder needed and no dragging the ladder around. Sprays up to 3000 psi adjustable paint is pumped at pressure. For heavy materials one of these fan blower types isn't going to give you the coverage/volume necessary to cover in a single coat. Thinning paint to 50% water might move liquid through the machine but provides horrible coverage requiring multiple coats. No paint manufacturers recommend more than 20% thinning cause it just doesn't work.
Have a small project imposed by my HOA - garage paint- professional painter wants to charge me $500,- I will give this a try and a galon of the paint of enamel that the HOA says is the color and brand I should use"sherwin williams" - everything for less than $100. Hope it works
Have a small project imposed by my HOA - garage paint- professional painter wants to charge me $500,- I will give this a try and a galon of the paint of enamel that the HOA says is the color and brand I should use"sherwin williams" - everything for less than $100. Hope it works
this is why I am so happy I don't live in an HOA area. Good luck, let us know how it goes.
3
1
Like
Helpful
Funny
Not helpful
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
Top Comments
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
26 Comments
Sign up for a Slickdeals account to remove this ad.
Would this particular one be good for those uses? Tired of buying expensive name brand only to use sparingly, when I keep hearing from trusted friends that the cheaper versions (including t*mu) are worth the 90% saving even if I have to replace one a few years down
Thanks SD community
Our community has rated this post as helpful. If you agree, why not thank SeriousPartner345
Would this particular one be good for those uses? Tired of buying expensive name brand only to use sparingly, when I keep hearing from trusted friends that the cheaper versions (including t*mu) are worth the 90% saving even if I have to replace one a few years down
Thanks SD community
Our community has rated this post as helpful. If you agree, why not thank braddster
Our community has rated this post as helpful. If you agree, why not thank HeyGuysChrisFixHere
Would this particular one be good for those uses? Tired of buying expensive name brand only to use sparingly, when I keep hearing from trusted friends that the cheaper versions (including t*mu) are worth the 90% saving even if I have to replace one a few years down
Thanks SD community
Would this particular one be good for those uses? Tired of buying expensive name brand only to use sparingly, when I keep hearing from trusted friends that the cheaper versions (including t*mu) are worth the 90% saving even if I have to replace one a few years down
Thanks SD community
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank Importdude
works pretty good but if you spray alot or the weather is hot the paint will dry and the tips will clog.
after it did that multiple times i went out to get the basic wagner at home depot
its much better and you can separate the motor/fan from the nozzle so you can clean it easier!
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!