Slickdeals is community-supported.  We may get paid by brands for deals, including promoted items.
populargabe23111 posted Yesterday 3:15 PM

Creality SpacePi X4L Filament Dryer Box w/ Dual Heating Chambers (OB w/ 1YR Warranty) $72.34 + free s/h

$72

$90

20% off
eBay
2K Views
Get Deal at eBay
Deal Details
creality-official-store via eBay

This is open box and includes a 1-Year Creality Warranty

Apply coupon NEWFINDS20 to drop the price to $72.34 (pre-coupon price is $90.43). Slightly less than the last front page deal.This has dual independent heating chambers. This dries up to 75 degrees vs it's big brother which goes up to 85 degrees.

Quote :
①The item is returned from our other customers for some reasons, like change one's mind, just don't like it, do not need it any more. ②Open box but never used.,it works greatly like the new one. ③It comes with the same warranty like the new one
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
creality-official-store via eBay

This is open box and includes a 1-Year Creality Warranty

Apply coupon NEWFINDS20 to drop the price to $72.34 (pre-coupon price is $90.43). Slightly less than the last front page deal.This has dual independent heating chambers. This dries up to 75 degrees vs it's big brother which goes up to 85 degrees.

Quote :
①The item is returned from our other customers for some reasons, like change one's mind, just don't like it, do not need it any more. ②Open box but never used.,it works greatly like the new one. ③It comes with the same warranty like the new one

Community Voting

Deal Score
+13
Good Deal
Get Deal at eBay

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

9 Comments

Sign up for a Slickdeals account to remove this ad.

Yesterday 6:12 PM
3.6K Comments
Joined Feb 2008
overzeetopYesterday 6:12 PM
3.6K Comments

Our community has rated this post as helpful. If you agree, why not thank overzeetop

I mistakenly bought this last time. It's nowhere near as nice as the X4 (no L) model. The lcd is pretty bad, the controls are super annoying, and it only heats to 70C, so if you plan on using anything other than PLA or PETg it won't dry as well (as the 85C X4)
1
1
Yesterday 6:20 PM
98 Comments
Joined Nov 2011
finneytdYesterday 6:20 PM
98 Comments
Quote from overzeetop :
I mistakenly bought this last time. It's nowhere near as nice as the X4 (no L) model. The lcd is pretty bad, the controls are super annoying, and it only heats to 70C, so if you plan on using anything other than PLA or PETg it won't dry as well (as the 85C X4)
I'm just getting into 3d printing. If I'm mainly just using PLA, would you consider this to be fine or something else like the Sunlu S4?
Yesterday 6:40 PM
22 Comments
Joined Feb 2017
Mambo_5Yesterday 6:40 PM
22 Comments
Tempting, but looking for a deal on another X4 (no L), have one already and they're really nice. Worth the upcharge IMHO
Original Poster
Pro
Expert
This user is an Expert in Home & Home Improvement
Yesterday 7:07 PM
17.6K Comments
Joined Jul 2008
gabe23111Yesterday 7:07 PM
Original Poster
Pro
Expert
This user is an Expert in Home & Home Improvement
17.6K Comments
Quote from finneytd :
I'm just getting into 3d printing. If I'm mainly just using PLA, would you consider this to be fine or something else like the Sunlu S4?
I have this along with the X4 (plus a few other dryers I've had including the S4). This will work perfect for PLA, PETG or TPU to name a few. The benefit this has over the S4 is that it has independent heating chambers, so for example you can dry PLA on one side and PETG or TPU on the other at their needed drying temperatures. The S4 Pro which Sunlu recently released I believe has independent heating chambers and can go up to 85 degrees. If you plan on drying engineering filament, while you technically could dry it in this X4L, you'd need to dry it for a much longer time than if you have a dryer than can hit 85 degrees and I'd recommend a dryer that can reach higher temps than this one for engineering filament.

Also, fwiw, the one I bought from this same listing came brand new.
Yesterday 8:04 PM
1.5K Comments
Joined Nov 2005
namxYesterday 8:04 PM
1.5K Comments
who else thought is was a 5.25" floppy disc holder?
Yesterday 10:54 PM
57 Comments
Joined Sep 2025
StrongHeat8009Yesterday 10:54 PM
57 Comments
Quote from gabe23111 :
I have this along with the X4 (plus a few other dryers I've had including the S4). This will work perfect for PLA, PETG or TPU to name a few. The benefit this has over the S4 is that it has independent heating chambers, so for example you can dry PLA on one side and PETG or TPU on the other at their needed drying temperatures. The S4 Pro which Sunlu recently released I believe has independent heating chambers and can go up to 85 degrees. If you plan on drying engineering filament, while you technically could dry it in this X4L, you'd need to dry it for a much longer time than if you have a dryer than can hit 85 degrees and I'd recommend a dryer that can reach higher temps than this one for engineering filament.Also, fwiw, the one I bought from this same listing came brand new.
It also dries ABS and ASA just fine.
Yesterday 10:55 PM
57 Comments
Joined Sep 2025
StrongHeat8009Yesterday 10:55 PM
57 Comments
Quote from overzeetop :
I mistakenly bought this last time. It's nowhere near as nice as the X4 (no L) model. The lcd is pretty bad, the controls are super annoying, and it only heats to 70C, so if you plan on using anything other than PLA or PETg it won't dry as well (as the 85C X4)
Bad info. It dries everything fine. I have 4 spools of ABS in one right now.

Sign up for a Slickdeals account to remove this ad.

Today 1:38 AM
36 Comments
Joined Mar 2014
freerunnacToday 1:38 AM
36 Comments
I had purchased this a while back and within a day or so the left heating unit failed. I contacted them and the default approach seems to be if you're comfortable replacing the module by unscrewing it apart.

It's tricky, but since I was comfortable with it it was straightforward.They actually sent me 2 replacement parts, a guide, checked in part way through, and the replacement part has worked since.

I kind of do like that I have a spare peice now to replace the heating element if it does go bad, and while I wouldn't use my experience as a review, it does feel like at least the team handling openboxes are pretty attentive and patient.
Today 1:57 AM
777 Comments
Joined Aug 2007
BeavermanToday 1:57 AM
777 Comments
Quote from namx :
who else thought is was a 5.25" floppy disc holder?
What's a floppy disc?
1

Join The Conversation

Share your experience with the Slickdeals community

Share information with the community. Please follow our Community Guidelines and be kind!

Related Deals

Sponsored

Popular Deals

Trending Deals