Milwaukee M18 18V Starter Kit w/ 5.0 + 2.0 Ah Battery w/ Select M18 Tool

UniqueLake5801

Jun 9, 2020 8:08 AM

2 Comments

Joined Oct 2019

UniqueLake5801Jun 9, 2020 8:08 AM

2 Comments

Quote from MajkMatt

:

Milwaukee tools are in the top-tier when it comes to power tools (which I would also include DeWalt in that tier), but you will usually be paying a premium (setting aside this sale for a moment) for premium performance. If you are a DIY-er and are on a budget, then you might consider Ridgid or Ryobi (both actually made by the same manufacturer). I would probably steer clear of Porter Cable just because I don't know what will happen with them. They are owned by Stanley Black and Decker and they recently purchased Craftsman from Sears (and you may have noticed Craftsman tools at Lowes now) and Craftsman has been marketed as a mid-tier tool for them (with DeWalt being their top-tier and Black and Decker as their lowest tier in a good-better-best setup where PC used to be their mid-tier). Anyway, you won't likely be disappointed with a Milwaukee tool... just maybe a little lighter in your wallet as you expand your collection.

Serious question. Ridgid offers lifetime service agreement as opposed to others who only offer warranty for limited years. Isn't it better to go with Ridgid especially if there isn't a huge difference in performance?

From past deals, I get the impression that people prefer Dewalt, Makita, and Milwaukee, then Ridgid and Ryobi.

2

1

JihyunC

Jun 9, 2020 8:25 AM

69 Comments

Joined Nov 2013

JihyunCJun 9, 2020 8:25 AM

69 Comments

My first time to get into 18V era and I chose Milwaukee. I got Hammer Drill driver, OSC tool, and Impact driver.

I thought I just needed at least three batteries just in case I use all at once- So canceled only one battery pack. (the most expensive one that was with OSC tool in my orders) So I am getting three tools and two of battery packages.

I guess this is also good deal even tho I don't cancel any of them especially if I need them.

Time to say good bye to my 7 year old 12V ryobi drill driver.

jasonyang9

Jun 9, 2020 10:46 AM

635 Comments

Joined Aug 2011

jasonyang9Jun 9, 2020 10:46 AM

635 Comments

Quote from Chunkylemonmilk

:

Great post OP! Looks like the same can be done with the larger starter kit with 8.0 and 6.0ah batteries.
https://www.homedepot.com/p/Milwa...457418-_-N

Are the 8ah and 6ah batteries noticeably heavier than the 5ah? I've only used the 2ah and the weight seems negligible but the battery life on the portable wet vac is poor.

I'm starting to pick up some tools on the same ecosystem and wondering if I should go for the 8ah and 6ah or the 5ah. Or is it overkill?

Thanks!

AndrewinMD

Pro

Jun 9, 2020 11:10 AM

5.1K Comments

Joined Jun 2008

AndrewinMD

Pro

Jun 9, 2020 11:10 AM

5.1K Comments

Quote from vietn95

:

Thanks I've decided to hold back until I actually need the extra power. So far the m12 has been a great reliable set!

I've had the reverse -- I bought the M18 impact many years ago. I finally picked up the M12 impact and drill/driver a few months ago with a couple extra batteries. I went to use the M12 impact to drive some 2" screws into 4" PT lumber, and while it was working, it was slow. I grabbed the M18 and drove those home in no time.

I'll probably sell the M12 driver at some point because there's just no comparison. The M18 sometimes has too much power and rips off the heads of screws (rarely and usually my fault), but the speed and power make it a joy to use. I don't think the M12 would have had a problem finishing the job I was doing, but it would have taken me a lot more time.

1

AndrewinMD

Pro

Jun 9, 2020 11:16 AM

5.1K Comments

Joined Jun 2008

AndrewinMD

Pro

Jun 9, 2020 11:16 AM

5.1K Comments

Quote from jasonyang9

:

Are the 8ah and 6ah batteries noticeably heavier than the 5ah? I've only used the 2ah and the weight seems negligible but the battery life on the portable wet vac is poor.

I'm starting to pick up some tools on the same ecosystem and wondering if I should go for the 8ah and 6ah or the 5ah. Or is it overkill?

Thanks!

I only have the 5.0 batteries and one 12.0 battery, but I can tell you that the wet/dry vac with the 5.0 battery is just fine. Since that little vac isn't good for big jobs anyway, the 5.0 battery is fine for small clean up after a project, and if I have a large job, I'll grab my corded vac anyway.

The HO batteries (6.0, 8.0, and 12.0) really aren't needed for the tools that come bundled with the 5.0 or smaller batteries. If you want to get the circular saw, blower, hedge trimmer, chainsaw, etc., then the HO batteries provide better power, but for the drills, etc., they are overkill for the most part. The big ones would be a pain to carry, too, when attached.

2

Chunkylemonmilk

Expert

This user is an Expert in Home & Home Improvement

Jun 9, 2020 11:46 AM

945 Comments

Joined Jul 2017

Chunkylemonmilk

Expert

This user is an Expert in Home & Home Improvement

Jun 9, 2020 11:46 AM

945 Comments

Quote from jasonyang9

:

Are the 8ah and 6ah batteries noticeably heavier than the 5ah? I've only used the 2ah and the weight seems negligible but the battery life on the portable wet vac is poor.

I'm starting to pick up some tools on the same ecosystem and wondering if I should go for the 8ah and 6ah or the 5ah. Or is it overkill?

Thanks!

Here's a great article about M18 batteries, if you're interested: https://www.protoolreviews.com/bu...son/46033/

3

cmudnd

Jun 9, 2020 12:10 PM

68 Comments

Joined Nov 2009

cmudndJun 9, 2020 12:10 PM

68 Comments

Quote from limey2

:

The hackzall is the one handed recip saw. The sawzall is the big one. Milwaukee invented the sawzall/recip saw.

For any recip saw compare on strokes-per-minute (SPM), stroke length, and any oscillation feature, which significantly improves wood cutting performance. Last I checked, the Hackzall wasn't as fast (SPM) as the Sawzall.

Because it can be used one-handed, the Hackzall's great for pruning, hacksaw use, and other uses where precision or maneuverability is important. I'd recommend a one-handed saw unless your primary use is demo where everything is fixed in place and the additional leverage of a two-handed saw is beneficial.

cmudnd

Jun 9, 2020 12:41 PM

68 Comments

Joined Nov 2009

cmudndJun 9, 2020 12:41 PM

68 Comments

Quote from UniqueLake5801

:

Serious question. Ridgid offers lifetime service agreement as opposed to others who only offer warranty for limited years. Isn't it better to go with Ridgid especially if there isn't a huge difference in performance?

From past deals, I get the impression that people prefer Dewalt, Makita, and Milwaukee, then Ridgid and Ryobi.

Ridgid's mid-tier: TTI's best is Milwaukee, mid is Ridgid, and low is Ryobi. I've heard good things about Ridgid's tools but there's nowhere near the available tools. It's like Bosch: they're wonderful but the system is limited. If all you need is drill or driver or few others I agree with you.

For homeowner use, I recommend you review all tools that you might use and whether a system supports them. I use my battery-powered string trimmer and blower weekly. I'd rather have a battery-powered vacuum or battery-powered hedge trimmer or battery-powered chainsaw than a battery-powered hammer drill.

For homeowner use, I've had fine service from a mix of Ryobi cordless for lighter tools (drill, impact, jigsaw) and outdoor power equipment and corded tools for heavier (circular, recip, hammer drill).

2

EALm4

Jun 9, 2020 1:25 PM

15 Comments

Joined Aug 2017

EALm4Jun 9, 2020 1:25 PM

15 Comments

Just got the Surge driver. Shipped battery. Store pickup the tool. Was able to cancel battery shipment. $90.32 out the door for the tool. Good enough for me! Thanks OP!

edit: For those in Maryland and want the Surge. 21093 has 8 of them left.

Last edited by EALm4 June 9, 2020 at 06:26 AM.

Kodaraw

Jun 9, 2020 1:41 PM

54 Comments

Joined Nov 2013

KodarawJun 9, 2020 1:41 PM

54 Comments

Debating between Milwaukee Fuel and Dewalt Max XR and can't decide between the two.

Haven't seen much on the Milwaukee Fuel Surge. How's that compare? Looks like a good price on that impact driver unless the Surge is Milwaukee's version of Dewalt's Atomic series

1

miamicuse

Jun 9, 2020 1:52 PM

500 Comments

Joined Nov 2011

miamicuseJun 9, 2020 1:52 PM

500 Comments

The cheapest I have ever seen the M18 vac was a Black Friday sale at $79, or $119 with a charger and 5ah battery. I bought it then. The prorated price for the bare vac is slightly lower then what I paid. I am thinking about the OMT, what is the lowest bare tool price anyone seen on the OMT? Around $79 I assume?

EALm4

Jun 9, 2020 1:59 PM

15 Comments

Joined Aug 2017

EALm4Jun 9, 2020 1:59 PM

15 Comments

Quote from Kodaraw

:

Debating between Milwaukee Fuel and Dewalt Max XR and can't decide between the two.

Haven't seen much on the Milwaukee Fuel Surge. How's that compare? Looks like a good price on that impact driver unless the Surge is Milwaukee's version of Dewalt's Atomic series

The Surge is hydraulic. More powerful and quieter than it's brushless brother. Cant go wrong with either. For me it was I was already in bed with the M18 batteries.

1

miamicuse

Jun 9, 2020 2:05 PM

500 Comments

Joined Nov 2011

miamicuseJun 9, 2020 2:05 PM

500 Comments

Someone mention Ridgid tools, the problem with Ridgid is even though they are made by the same company TTI out of Hong Kong, they are the mid level brand. TTI owns Ryobi, Ridgid and Milwaukee. Ryobi is the low tier, Ridgid is the mid tier and Milwaukee is the higher tier. The problem is both Ryobi and Milwaukee has a wide selection of tools, but Ridgid is limited. If you are seriously thinking of getting into power tools, eventually you will find your hands tied by Ridgid not having the offerings of the other brands. Makita for example has a great selection of tools. I have Ridgid tools with their batteries but those sat unused for years.

I think one reason TTI does not have a wide selection of Ridgid tools is because unlike Milwaukee and Ryobi where they own the brands, the name Ridgid is only licensed from Emerson who produces Ridgid plumbing tools and shop vacs. Emerson let TTI make power tools under the Ridgid name to be sold at Home Depots only. I suspect the licensing agreement probably limits what they can do for example they may be prevented from making plumbing tools like a propress or landscape tools like a mower or shopvacs.

2

BraveBike692

Jun 9, 2020 2:06 PM

17 Comments

Joined Nov 2019

BraveBike692Jun 9, 2020 2:06 PM

17 Comments

Quote from ginuwinqbin

:

You don't need to return the free item. Just order one for store pickup and one for delivery and cancel the one you don't want after the order goes through.

Or just never go pickup the one at the store? Do they charge you when you pick it up? Or when you order it?

1

geekygamerchik

Jun 9, 2020 2:08 PM

199 Comments

Joined Nov 2015

geekygamerchikJun 9, 2020 2:08 PM

199 Comments

Does anyone know if Milwaukee released a version 4.0 of their M18 Fuel drill to fix that collet issue (bits releasing)?

Prime Big Deal Days Is HerePrime Big Deal Days Is Here

Milwaukee M18 18V Starter Kit w/ 5.0 + 2.0 Ah Battery w/ Select M18 Tool

$199

Editor's Notes

Original Post

Editor's Notes

Original Post

Community Voting

Top Comments

Join The Conversation

167 Comments

Join The Conversation

Related Searches