expired Posted by coastalconn • Mar 9, 2021
Mar 9, 2021 1:51 AM
Item 1 of 1
expired Posted by coastalconn • Mar 9, 2021
Mar 9, 2021 1:51 AM
Waterdrop RO Reverse Osmosis Water Filtration System, 600 GPD Fast Flow, Tankless, 1.5:1 Pure to Drain, Smart LED Faucet, Reduce TDS, USA Tech Support, - $329
$329
$399
17% offAmazon
Visit AmazonGood Deal
Bad Deal
Save
Share
23 Comments
Sign up for a Slickdeals account to remove this ad.
The main issue that the ratio doesn't address is that as these types of filters sit idle they lose their filtering ability on the initial water flow and may take several minutes of flow to get the TDS down to similar levels as a tank system.
The main issue that the ratio doesn't address is that as these types of filters sit idle they lose their filtering ability on the initial water flow and may take several minutes of flow to get the TDS down to similar levels as a tank system.
The main issue that the ratio doesn't address is that as these types of filters sit idle they lose their filtering ability on the initial water flow and may take several minutes of flow to get the TDS down to similar levels as a tank system.
I have not had any issues with it so far, definitely some of the best tasting water I've had.
Sign up for a Slickdeals account to remove this ad.
The main issue that the ratio doesn't address is that as these types of filters sit idle they lose their filtering ability on the initial water flow and may take several minutes of flow to get the TDS down to similar levels as a tank system.
A low drain ratio of 1.5:1 means that dispensing 1.5 cups of pure water produces only 1 cup of wastewater
A low drain ratio of 1.5:1 means that dispensing 1.5 cups of pure water produces only 1 cup of wastewater
The main issue that the ratio doesn't address is that as these types of filters sit idle they lose their filtering ability on the initial water flow and may take several minutes of flow to get the TDS down to similar levels as a tank system.
Sign up for a Slickdeals account to remove this ad.
Are you using a separate TDS device or just going based on the unit's display?