Original Post
Written by
Edited August 16, 2021
at 05:26 AM
by
Found some stuff on Amazon with low prices and free shipping.
CRAFTSMAN Nut Driver Set, 3 Piece (CMAF433PK) - $1.99
In stock soon
https://www.amazon.com/gp/product...UTF8&psc=1
DEWALT DW1312 3/16-Inch Titanium Split Point Twist Drill Bit - $0.79
OOS
https://www.amazon.com/gp/product...UTF8&psc=1
BOSCH ITT10202 2 pc. Impact Tough 2 In. Torx #10 Power Bits - $0.79
https://www.amazon.com/gp/product...0DER&psc=1
BOSCH ITT30202 2 pc. Impact Tough 2 In. Torx #30 Power Bits - $0.79
OOS
https://www.amazon.com/gp/product...0DER&psc=1
BOSCH ITPH2102 2 Pc. Impact Tough 1 In. Phillips #2 Insert Bits - $0.69
OOS
https://www.amazon.com/gp/product...0DER&psc=1
BOSCH TI2132IM 5/64-inch Impact Tough Titanium Drill Bit, - $0.59
OOS
https://www.amazon.com/gp/product...UTF8&psc=1
BOSCH TI2134IM 7/64-inch Impact Tough Titanium Drill Bit, - $0.79
OOS
https://www.amazon.com/gp/product...UTF8&psc=1
BOSCH TI2133IM 3/32-Inch Impact Tough Titanium Drill Bit, - $0.79
OOS
https://www.amazon.com/gp/product...UTF8&psc=1
BOSCH ITNS382 Impact Tough 2-9/16 In. x 3/8 In. Nutsetter - $0.89
OOS
https://www.amazon.com/Bosch-ITNS...ols&sr=1-6
BOSCH ITNS142 Impact Tough 2-9/16 In. x 1/4 In. Nutsetter - $0.99
OOS
https://www.amazon.com/Bosch-ITNS...r=1-6&th=1
BOSCH ITPH2R102 2 Pc. 1 In. Phillips #2R (Reduced) Impact Tough Screwdriving Bit - $0.69
OOS
https://www.amazon.com/Bosch-ITPH...ols&sr=1-2
DEWALT DWA5100 Impact Ready Masonry Bit, 5/32" x 4" x 6" - $1.09
OOS
https://www.amazon.com/DEWALT-DWA...07&sr=8-13
https://www.amazon.com/gp/product...0DER&psc=1
31 Comments
Your comment cannot be blank.
Featured Comments
nut driver - 1 piece metal that has a socket on one end and the other end goes into impact driver. suppose you can put it into a drill too as it would fit in most chucks. this is opposed to using an adapter on an impact driver and attaching any socket to the adapter.
power - to me, a marketing term that it's hardened and can take impacts better. ie: wont shatter or break on you if you use it in an impact driver.
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank solargeek84
About 30 seconds.
Our community has rated this post as helpful. If you agree, why not thank Winnebago
drill bit - round shank for use in a drill. open chuck, insert drill bit, close chuck. these will not work in impact drivers without adapter.
nut driver - 1 piece metal that has a socket on one end and the other end goes into impact driver. suppose you can put it into a drill too as it would fit in most chucks. this is opposed to using an adapter on an impact driver and attaching any socket to the adapter.
power - to me, a marketing term that it's hardened and can take impacts better. ie: wont shatter or break on you if you use it in an impact driver.
Sign up for a Slickdeals account to remove this ad.
I mean you're talking about what's available after the post has been up for 5+ hours… I'm sure a Phillips bit is a little common.