Home Depot has
Ryobi One+ HP 18V Brushless Cordless 3-Tool Combo Kit w/ 2x 1.5 Ah Batteries & Charger (PBLCK33K2N) for
$141.55.
Shipping is free.
Thanks to Community Member
tunabreath for finding this deal.
Includes:- 1x 18V ONE+ HP Brushless Cordless 1/2 in. Drill/Driver (PBLDD01)
- 1x 18V ONE+ HP Brushless Cordless 1/4 in. Impact Driver (PBLID01)
- 1x 18V ONE+ HP Brushless Reciprocating Saw with blade (PBLRS01)
- 2x 1.5 Ah Batteries (PBP002)
- 1x 18V Charger (PCG002)
Features:- Brushless 1/2 in. Drill/Driver: Brushless motor provides up to 20% faster drilling and up to 750 in./lbs. of torque
- Brushless 1/2 in. Drill/Driver: 2-speed gearbox for ultimate user control provides 0 - 500 / 0 RPM - 2,100 RPM
- Brushless 1/2 in. Drill/Driver: 24-position clutch allows users to adjust to desired torque setting when driving a variety of fasteners
- Brushless 1/4 in. Impact Driver: Brushless motor delivers up to 25% faster driving
- Brushless 1/4 in. Impact Driver: Produces a powerful 2,200 in./lbs. of torque
- Brushless 1/4 in. Impact Driver: Optimized impacting mechanism delivers up to 4,000 IPM
- Brushless Reciprocating Saw: Brushless motor provides 64% faster cutting
- Brushless Reciprocating Saw: Over 380 cuts per charge using an 18V ONE+ 9.0 Ah battery
- Brushless Reciprocating Saw: 1-1/4 in. stroke length and 3,200 SPM for fast cutting
- 1.5 Ah Batteries: Features fade-free power and on-board LED fuel gauge
- Charger: Compatible with all RYOBI 18V ONE+ Lithium-Ion Batteries
Leave a Comment
Top Comments
Next time you do an oil change grab a small wire brush and clean the threads inside the pan. Go ahead and get a replacement drain plug too, they're cheap. Every time after that replace the copper washer and you should be fine. Don't over tighten the drain plug. Hand tighten the plug until it stops then go ½ a turn with a wrench. That's all it needs
22 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank smalljohnson
Sign up for a Slickdeals account to remove this ad.
Does the HP Brushless Cordless 1/4 in. Impact Driver has enough power to do that? we tried using a BLACK+DECKER 20V MAX Lithium-Ion Cordless 3/8 in. Drill, but it failed...
Also, is the HP Brushless Cordless 1/2 in. Drill/Driver a power upgrade to my black decker 20V? this RYOBI drill is 18V so I'm confused
Our community has rated this post as helpful. If you agree, why not thank LeeJ2539
Does the HP Brushless Cordless 1/4 in. Impact Driver has enough power to do that? we tried using a BLACK+DECKER 20V MAX Lithium-Ion Cordless 3/8 in. Drill, but it failed...
Also, is the HP Brushless Cordless 1/2 in. Drill/Driver a power upgrade to my black decker 20V? this RYOBI drill is 18V so I'm confused
Next time you do an oil change grab a small wire brush and clean the threads inside the pan. Go ahead and get a replacement drain plug too, they're cheap. Every time after that replace the copper washer and you should be fine. Don't over tighten the drain plug. Hand tighten the plug until it stops then go ½ a turn with a wrench. That's all it needs
torque wrench to torque it back to spec.
Our community has rated this post as helpful. If you agree, why not thank trza
Does the HP Brushless Cordless 1/4 in. Impact Driver has enough power to do that? we tried using a BLACK+DECKER 20V MAX Lithium-Ion Cordless 3/8 in. Drill, but it failed...
Also, is the HP Brushless Cordless 1/2 in. Drill/Driver a power upgrade to my black decker 20V? this RYOBI drill is 18V so I'm confused
Use a breaker bar. And when you tighten it, use a torque wrench to spec.
Tighten the lugs with a torque wrench set to spec.
Sign up for a Slickdeals account to remove this ad.
Leave a Comment