expired Posted by Rokket | Staff • Sep 10, 2023
Sep 10, 2023 1:11 AM
Item 1 of 2
Item 1 of 2
expired Posted by Rokket | Staff • Sep 10, 2023
Sep 10, 2023 1:11 AM
Folding Wood Top Wall Mounted Workbench: 41" or 48"
+ Free Shipping$75 each
$150
Home Depot
Visit Home DepotGood Deal
Bad Deal
Save
Share
Leave a Comment
Top Comments
1. The brackets are held to the wood by extremely small screws. The brackets will wobble. Two screws actually had the head broken off, resulting in just the body of the screw stuck in the wood. Luckily there is enough room to drive another screw of your choice in next to any broken off ones. Note, I don't think it is a huge deal that they are a bit wobbly pre-installation, because once installed to studs, they can no longer wobble. They'd have to both wobble together, and I haven't found this to be an issue.
2. The braces come with lock nuts on the bolts. This is good. The bad thing is, you MUST check them. Nearly half of the nuts were not even hand tight. I have to assume this is by design and they expect you to tighten them.
3. You cannot tighten the nuts and bolts too much. As a matter of fact, there are two bolts in particular which should be replaced with half-inch longer ones. Reason being, the nylon portion of the lock nut is almost not engaged at all. If you tighten it to the point that the lock nut is doing its job, the mechanism will no longer slide easily.
4. There are extra grooves in the wood on the back if you have non-standard stud placement. It comes factory 32" center to center to span across two studs, and it does that perfectly.
5. The wood tops are nice. I accept the faults of the brackets at this price.
Thanks for the great deal!
https://www.homedepot.c
The locking mechanism is a bit different though and doesn't have gas springs
https://www.amazon.com/dp/B088QB8...b_ap_
33 Comments
Sign up for a Slickdeals account to remove this ad.
https://www.homedepot.c
The locking mechanism is a bit different though and doesn't have gas springs
Was thinking of buying this but I have a perfectly good solid wood board that's like 5 ft
Our community has rated this post as helpful. If you agree, why not thank jrwalker01
Was thinking of buying this but I have a perfectly good solid wood board that's like 5 ft
https://www.amazon.com/dp/B088QB8...b_ap_
https://www.amazon.com/dp/B088QB8...b_ap_
https://www.homedepot.c
The locking mechanism is a bit different though and doesn't have gas springs
https://www.homedepot.c
The locking mechanism is a bit different though and doesn't have gas springs
Sign up for a Slickdeals account to remove this ad.
https://www.homedepot.c
The locking mechanism is a bit different though and doesn't have gas springs
last time i ordered 2 and 1 of them was damaged, was a little bummed about having to return it
its pretty solid IMO and a really good deal at $75ea
i need 2 more and ordered 3 just in case
https://www.amazon.com/dp/B088QB8...b_ap_
Our community has rated this post as helpful. If you agree, why not thank disturbedfuel15
1. The brackets are held to the wood by extremely small screws. The brackets will wobble. Two screws actually had the head broken off, resulting in just the body of the screw stuck in the wood. Luckily there is enough room to drive another screw of your choice in next to any broken off ones. Note, I don't think it is a huge deal that they are a bit wobbly pre-installation, because once installed to studs, they can no longer wobble. They'd have to both wobble together, and I haven't found this to be an issue.
2. The braces come with lock nuts on the bolts. This is good. The bad thing is, you MUST check them. Nearly half of the nuts were not even hand tight. I have to assume this is by design and they expect you to tighten them.
3. You cannot tighten the nuts and bolts too much. As a matter of fact, there are two bolts in particular which should be replaced with half-inch longer ones. Reason being, the nylon portion of the lock nut is almost not engaged at all. If you tighten it to the point that the lock nut is doing its job, the mechanism will no longer slide easily.
4. There are extra grooves in the wood on the back if you have non-standard stud placement. It comes factory 32" center to center to span across two studs, and it does that perfectly.
5. The wood tops are nice. I accept the faults of the brackets at this price.
Thanks for the great deal!
Sign up for a Slickdeals account to remove this ad.
https://slickdeals.net/f/16905994-industrial-4-ft-folding-wood-top-workbench-wshd48fwb-the-home-depot-75
Leave a Comment