| Product Description: | About Magnat Alpha RS Active Subwoofer, Black
Alpha RS Subwoofer
Active, profound and perfect for a home cinema and stereo setup
Our Alpha RS active subwoofer are an ideal addition to any home cinema or hi-fi system. Thanks to its variable parameters, the RS subwoofer can be connected to speakers from any manufacturer and always achieve optimal audio results.
Home Cinema
It cannot be denied that the low-frequency content in a hi-fi and surround system is decisive for the perceived sound quality and, thereby, one's film and music experience. On the other hand, the placement of speakers is particularly critical because of the low frequency.
Active, profound and perfect for a home cinema and stereo setup
It cannot be denied that the low-frequency content in a hi-fi and surround system is decisive for the perceived sound quality and, thereby, one's film and music experience. On the other hand, the placement of speakers is particularly critical because of the low frequency range. Resonance and standing waves can quickly occur and diminish the audio impact.
The answer to these issues lies in active subwoofers, such as the Alpha RS series from Magnat. These can be set up virtually anywhere, because we cannot locate low frequencies. And, thanks to the integrated amplifier, they are independent of the power produced by the electronics, regardless of whether it's a stereo amplifier or a surround receiver. Two models, one with a 200 mm bass chassis, the other measuring 300 mm in diameter, allow an existing home cinema or hi-fi system, regardless of the make or model, to achieve a new, undreamt of level of quality in the deep bass range.
Perfect adaptation to the room
With various control options for the level, crossover frequency and phase, the Alpha RS active subwoofers can be perfectly adapted to suit any existing system. Thanks to their high-level input, the Alpha series subwoofers can even be used with older components that lack a corresponding subwoofer pre-out. You simply use a free speaker output on the amplifier and |
Leave a Comment
Top Comments
Just looked it over again- the 12" is only 31 pounds, no way it's a serious driver or cabinet at that weight. I'm getting a white van speaker vibe lol.
75 Comments
Sign up for a Slickdeals account to remove this ad.
https://youtu.be/VnSpH5YTsAs
Our community has rated this post as helpful. If you agree, why not thank JollyHarrier799
Would this be good for that use?
I would be feeding them from the high power inputs as my amp has no sub out.
Should I run Amp-Sub-Speakers or just add another run from the amp to the sub and a separate run from the sub to the speakers?
Sign up for a Slickdeals account to remove this ad.
In case you're interested in better sound quality, maybe consider the Cardas method for speaker placement and room treatments.
Would this be good for that use?
I would be feeding them from the high power inputs as my amp has no sub out.
Should I run Amp-Sub-Speakers or just add another run from the amp to the sub and a separate run from the sub to the speakers?
High-level inputs (7)
For connection to the high-level (speaker) outputs of the receiver/amplifier, refer to Fig. 4.
https://magnat-usa.com/subwoofers...lp
Sign up for a Slickdeals account to remove this ad.
Leave a Comment