expiredLovelyCheetah | Staff posted Jul 15, 2024 05:24 AM
Item 1 of 3
Item 1 of 3
expiredLovelyCheetah | Staff posted Jul 15, 2024 05:24 AM
Tools / Accessories Sale: 4'x4' 30" BORA Centipede Portable Work Stand
& More + Free S&H w/ Prime$85
$155
45% offWoot!
Visit Woot!Good Deal
Bad Deal
Save
Share
Leave a Comment
Top Comments
I wouldn't call it sturdy or stable, but on a flat concrete surface it can hold a lot of weight and with a well secured top installed it's not "wobbly." If you plan to do a lot of hand sawing, planing, chisel work, etc this is likely not stable enough. The cross braces make it difficult to store anything under the table which is annoying for my long term use, but they're a decent place to hang clamps while working.
16 Comments
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank en1t
I wouldn't call it sturdy or stable, but on a flat concrete surface it can hold a lot of weight and with a well secured top installed it's not "wobbly." If you plan to do a lot of hand sawing, planing, chisel work, etc this is likely not stable enough. The cross braces make it difficult to store anything under the table which is annoying for my long term use, but they're a decent place to hang clamps while working.
The worktop is held to the centipede stand by these clamp type of things, so overall the whole setup is stable but not overly ridgid. Certainly fine as a basic assembly/clamping surface. For me it's a quick way to deploy a basic 20mm dog-holed worksurface. You'll probably get a little more ridgidity out of two stable sawhorses with attached worksurface, and the centipede definitely won't hold a candle to something like a Paulk workbench, variations of which I consider to be the ultimate DIY bench design for jobsite trim/finish carpentry.
The track saw rail for $28 is a good deal, if I didn't already have 2 x 55" rails already I would buy these. They look almost exactly like the wen tracks I bought.
Sign up for a Slickdeals account to remove this ad.
The track saw rail for $28 is a good deal, if I didn't already have 2 x 55" rails already I would buy these. They look almost exactly like the wen tracks I bought.
WEN is aware of the issue and will send out a new control board under warranty for you to swap out, but fixing it yourself is worth learning how to do.
Bad capacitors are a common failure point for a lot of electronics, especially TVs, so it's pretty rewarding when you can fix them with a 10 cent part.
Do you have a link? not seeing in the "see more" op link.
Sign up for a Slickdeals account to remove this ad.
Leave a Comment