Update: This very popular deal is still available.
Woot! has
Linksys LN1301 Tri-Band AX4200 WiFi 6 Wireless Router on sale for
$14.99 when you apply coupon code
GEARUP4FALL at checkout.
Shipping is free for Amazon Prime Members (must login with your Amazon account and select a shipping address in order for Woot to apply free shipping) or is otherwise $6 per order.
Thanks to community member
achhu26 for sharing this deal.
About this Item:
- Covers up to 2700 sq. ft.
- Handles 40+ devices
- Speed up to 4.2 Gbps (AX4200)
- WiFi 6 Tri-Band
- Quad-Core Processor
- MU-MIMO and OFDMA
Leave a Comment
Top Comments
With wireless mesh (instructions below), it's one heck of a deal and blows DECO AX5000 deal out of the water, imho.
EDIT: UPDATED instructions for enabling MESH (thanks to @rbtcordell for the original source):
1-Setup your Main router completely.
2-Plug your child node using the wan port to the main router lan port, wait for a solid purple light on the child node before proceeding
3-Log into your main router web admin.
4-Click on CA at the bottom right.
5-Click on Connectivity and CA Router setup.
6-Click on both Add Wired and Add Wireless nodes buttons. Wait for the Add wireless button to re-enable.
7-Click Done adding Child Nodes and then Apply.
8-Now the child node light should start flashing purple and turn into a mesh mode when it turns blue.
9-Disconnect Ethernet and wait for blue light again.
10-Move node to desired location.
https://forum.dd-wrt.com/phpBB2/v...?p=1304991
openwrt release notes
https://github.com/asd333111/open...ax-fd13d50
disassembly photos for the curious
https://imgur.com/a/linksys-ln130...ly-YJM1qfw
qualcommax: ipq807x: add support for Linksys MX4300 (LN1301)
Hardware specification:
========
SoC: Qualcomm IPQ8174
Flash: 1GB (Micron MT29F8G08ABBCAH4 or AMD/Spansion S34MS08G2)
RAM: 2GB (2x Kingston B5116ECMDXGJD or ESMT M15T2G16128A DDR3L)
Ethernet: 4x 10/100/1000Mbps (Qualcomm QCA8075)
WiFi1: 5GHz ax 2x2 (Qualcomm QCN5054 + Skyworks SKY85755-11) - channels 36-64 (low band)
WiFi2: 2.4GHz ax 2x2 (Qualcomm QCN5024 + Skyworks SKY85340-11)
WiFi3: 5GHz ax 4x4 (Qualcomm QCN5054 + Skyworks SKY85755-11) - channels 100-177 (high band)
LED: 1x RGB status (NXP PCA9633)
USB: 1x USB 3.0
Button: WPS, Reset
1. Disable DHCP (optional)
2. Set the device to Bridge Mode under Connectivity tab
3. Connect cable from your router to a LAN port.
4. Get some nail polished and a round sticker to cover the annoying flashing right light.
5. Click the 'AC' at the bottom of the page to see the detail configurations of wifi.
1,158 Comments
Sign up for a Slickdeals account to remove this ad.
I know this is a fire sale, but need to know if recommending it to a friend is a good and noble thing to do. Not planning on doing anything to flash it or custom build hers.
The value in this is its pretty decent hardware at a laughably low price. The hedge is that DDWRT or OpenWRT will get a mature build out in the coming months (which seems probable, esp if there are a lot of these sold at dirt cheap prices) and people will unlock full potential of what is pretty decent hardware.
I am willing to roll the dice with the latter being true. Worst case I am out $55. That said, I wouldn't give these to my parents, they need set and forget router that auto-updates.
Sign up for a Slickdeals account to remove this ad.
The Pi 3 is still $35 for 1Gb ram and no flash. This router is on par with an AWS t2.small
I'm thinking these might make decent low power kubernetes nodes.
Sign up for a Slickdeals account to remove this ad.
I know this is a fire sale, but need to know if recommending it to a friend is a good and noble thing to do. Not planning on doing anything to flash it or custom build hers.
Leave a Comment