SVS Sound has their
SVS 16-Ultra Series Subwoofers on sale
from $1,699.99 below.
Shipping is free.
Thanks to Community Member
fourml8r of sharing this deal.
- Additional Savings: There is a additional 5% Savings when buy 2 when you Activate the discount on the page or apply discount code GoDual during checkout.
Available:
- SB16-Ultra (Piano Gloss Black or Black Oak Veneer) $1,699.99
- 16" Woofer
- 1500W RMS Power, 5000W Peak
- Class D Amplifier
- 16 to 460 Hz Frequency Response
- Front-Firing Configuration
- PB16-Ultra (Piano Gloss Black or Black Oak Veneer) $2,199.99
- 16" Fiberglass Resin Composite Woofer
- 3x 3.5" Front-Firing Ports
- 1500W RMS Power, 5000W Peak
- Sledge Class-D Amplifier
- Adjustable Frequency Response
- Front-Firing Configuration
Leave a Comment
Top Comments
It's about time after all these years of crap Klipsch subs and there horrible AMP failures, crap 2 year warranties, that they finally put out a sub class that has a real good amp, great drivers and a proper 5 year warranty at a fantastic price esp when on sale. Honestly the biggest value in subs now.. Good for Klipsch & the consumer!, Someone finally WOKE UP in the Klipsch R&D/Executive dept & gave us the RP sub line!!!
67 Comments
Sign up for a Slickdeals account to remove this ad.
But I still enjoy the sound of my single Velodyne. There's just something about the Velodyne that I can't seem to part ways.
And then I see the Klipsch subs and their prices. I came to the same conclusion like previous posts where I could've purchased two for the price of one on sale. I sometimes get buyer's remorse
I tried one PB-2000, and I wasn't impressed. I thought, should I upgrade or buy a 2nd one? I had pretty limited space, so the PC may have helped. I found an "open box" pb-3000 on Amazon for $1248 and went that route and no regrets.
I tried one PB-2000, and I wasn't impressed. I thought, should I upgrade or buy a 2nd one? I had pretty limited space, so the PC may have helped. I found an "open box" pb-3000 on Amazon for $1248 and went that route and no regrets.
If you define good performance as shaking your couch,windows,foundation, etc, yes those Klipsch subs will do that for less money.
If you're looking for more accurate tactile quality sound, SVS(and others) are in that higher category and comes at a cost.
SVS may not be the least expensive but they definitely are in that higher quality category.
For some people they are worth the extra cost, you get what you pay for after all.
If you don't implement them(frankly your whole setup) properly all this other talk is irrelevant imo.
So much more goes into all this also.
Sign up for a Slickdeals account to remove this ad.
RP1600sw is currently $1800. Has no Eq options, ~1/2 the RMS power, <1/3 peak power, less flat response, less extension, no balanced input, only 0°/180° phase, and no 12V trigger. These products are not the same class. At all.
RP1600SW on sale goes for $899
Who needs onboard Eq when a modern receiver with good RC will override your subs eq and phase settings?...
Your Peak/RMS figures don't mean squat because Klipsch developed their new subs with ultra efficient drivers.. what matters is db output to shut that debate down.
Based on CEA-2010 measurements, the Klipsch and PB-16 Ultra are fairly linear in their response, and the Klipsch has more extension.
Why does a sub need a 12v trigger when it's got auto on feature?!?! I'll let my receiver handle the 12v triggers.
Any more questions?
https://imgur.com/a/shootout-TEGngUq
If youre going to be tweaking PEQ settings, time & phase alignments, etc youre much better off using REW and associated tools (MSO, etc) to properly integrate and tweak your settings/curves. So, IMO "features" like having an App or PEQ settings, etc dont add any value.
"AVR: If the A/V receiver set-up function equalizes the subwoofer channel (such as Audyssey MultEQ XT or XT32), the PEQ control is usually not required." https://www.svsound.com/blogs/sub...anding-dsp
If youre going to be tweaking PEQ settings, time & phase alignments, etc youre much better off using REW and associated tools (MSO, etc) to properly integrate and tweak your settings/curves. So, IMO "features" like having an App or PEQ settings, etc dont add any value.
"AVR: If the A/V receiver set-up function equalizes the subwoofer channel (such as Audyssey MultEQ XT or XT32), the PEQ control is usually not required." https://www.svsound.com/blogs/sub...anding-dsp
Currently using RSL 12s which is an amazing bargain as I paid $650 for it. I know of no sub that can do more at that price point. it does 95% of what the PB16 could do but at 1/4 of the cost. For me the RSL fits in better with my current room configuration. I do feel the PB16 was overall a better sub but then you get lost in "value" debate. the other issue with larger subs is that placement becomes more limited due to the size. Both are great products in their own right.
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank fourml8r
"AVR: If the A/V receiver set-up function equalizes the subwoofer channel (such as Audyssey MultEQ XT or XT32), the PEQ control is usually not required." https://www.svsound.com/blogs/sub...anding-dsp
If youre going to be tweaking PEQ settings, time & phase alignments, etc youre much better off using REW and associated tools (MSO, etc) to properly integrate and tweak your settings/curves. So, IMO "features" like having an App or PEQ settings, etc dont add any value.
Why does a sub need a 12v trigger when it's got auto on feature?!?! I'll let my receiver handle the 12v triggers.
Any more questions?
https://imgur.com/a/shootout-TEGngUq
as far as optimizing sub performance using some type of software, there are many options. these normally come down to the comfort level of the person doing the setup.
- you can use some type of AVR software (Audyssey, Dirac, YPAO, etc.). Many people favor these due to ease of setup as this will generally get you half decent results with minimal effort. These also vary based on built-in software or upgraded apps to be able to more finely tune your system. One feature that may interest users is the ability to tune subs using independent outputs (But this is a meaningless feature if you only use one sub), but it is not the only option to do so.
- you may use something like REW, but that is more effort than many people are interested in doing and you need to add the cost of a calibration mic. .
- you can also use the app included with your sub (If so equipped). Lots of people like this for the same ease of use. i like this feature as it makes on the fly adjustment / tweaks very easy.
- sub crawl - another tool that can be used but is easier with fewer / smaller subs than with larger multiple subs.
- sub modes - some subs offer either an electronic type of "modes" or they may offer port option modes where closing off ports can improve or extend sub performance.
- synopsis - there are many tools to use and you need to choose based on your budget and comfort level.
regarding 12v trigger vs auto turn on, i do prefer the 12v only because sometimes when listening to music, you may encounter quieter sections of music that are not enough signal to turn on the sub immediately. and if it then becomes louder there is a slight delay in the sub auto-on feature kicking in. same thing applies to auto-off and quieter music passages where the sub will turn off and then not be ready when the louder music returns. comes down to preference of the user.while there are many comparisons to less expensive klipsch units, my main issue is the past history of klipsch amps failing due to cheap components. subs use plate amps which are less expensive to produce but are well suited for the application. so any brand is prone to this failure, but i have seen more klipsch amps fail in my years of doing HT installs than any other brand.
the last item to consider is customer service. this one is a hands down win for SVS. they are very well known for having exemplary customer service. do not expect that level of service from a lower end / mainstream sub manufacturer. however you do pay for this in the product cost. peace of mind and lifetime support may be important features to some.
it always comes down to budget. the $899 klipsch that many are referring to is probably not going to be cross shopped with a $2,000+ SVS offering (Or other higher end brand sub), if you don't have the budget then enjoy whatever you can afford. there is not one answer or option.many products can provide decent performance while still being "affordable".
SD is one of the worst places to get audio advice since the primary focus is usually price. there are many other AV forums to go to for more accurate information. users on SD tend to be fanboys just trying to justify their own purchase. someone stating buy brand X / model Y without knowing your specific needs / wants and budget is an armchair quarterback handing out non-professional advice.
Leave a Comment