Item 1 of 2
Item 1 of 2
expirediconian | Staff posted Mar 21, 2025 9:26 PM
Integra DRX 3.4 100W 9.2-Channel 8K Network AV Receiver
$569
$1,500
62% off
+ Free Shippingat Adorama
Heads up, this deal has expired. Want to create a deal alert for this item?
+ Free Shippingat AdoramaDeal Details
Adorama has Integra DRX 3.4 100W 9.2-Channel 8K Network AV Receiver (DRX3.4M2BMDD) for $569. Shipping is free.
Thanks to Deal Editor iconian for sharing this deal.
Includes:
Thanks to Deal Editor iconian for sharing this deal.
Includes:
- Integra DRX 3.4 100W 9.2-Channel 8K Network AV Receiver
- Remote Controller (RC-973R)
- 2x AAA Batteries for Remote
- Speaker Setup Microphone
- Indoor FM Antenna
- AM Loop Antenna
- Power Cord
- Quick Start Guide
- 5.2.4/7.2.2-ch Dolby Atmos and DTS: X playback
- 9.2-ch multichannel pre-outs
- IMAX Enhanced certified for IMAX digital remasters
- Independent tone controls (bass/treble) for all channels
- Works with Sonos supporting multiple Sonos Connect/Port control and Volume Passthrough mode
- AirPlay 2 multi-room audio with Siri voice control
- Dedicated gold-plated Zone 2 and Zone 3 speaker outputs
- Ethernet LAN terminal
- AC inlet for detachable IEC power cable
- Aluminum front panel and volume knob
- 3-Mode display dimmer (Normal/Dim/Dimmer)
Editor's Notes
Written by SaltyOne | Staff- About this deal:
- This offer matches the previous Frontpage deal (+50).
- Get 1%-5% cash back on deals like this with a cash back credit card. Compare the available cash back credit cards here.
- About this product:
- Integra 5 Year Limited Warranty
Community Notes
About the Poster
Deal Details
Community Notes
About the Poster
Adorama has Integra DRX 3.4 100W 9.2-Channel 8K Network AV Receiver (DRX3.4M2BMDD) for $569. Shipping is free.
Thanks to Deal Editor iconian for sharing this deal.
Includes:
Thanks to Deal Editor iconian for sharing this deal.
Includes:
- Integra DRX 3.4 100W 9.2-Channel 8K Network AV Receiver
- Remote Controller (RC-973R)
- 2x AAA Batteries for Remote
- Speaker Setup Microphone
- Indoor FM Antenna
- AM Loop Antenna
- Power Cord
- Quick Start Guide
- 5.2.4/7.2.2-ch Dolby Atmos and DTS: X playback
- 9.2-ch multichannel pre-outs
- IMAX Enhanced certified for IMAX digital remasters
- Independent tone controls (bass/treble) for all channels
- Works with Sonos supporting multiple Sonos Connect/Port control and Volume Passthrough mode
- AirPlay 2 multi-room audio with Siri voice control
- Dedicated gold-plated Zone 2 and Zone 3 speaker outputs
- Ethernet LAN terminal
- AC inlet for detachable IEC power cable
- Aluminum front panel and volume knob
- 3-Mode display dimmer (Normal/Dim/Dimmer)
Editor's Notes
Written by SaltyOne | Staff- About this deal:
- This offer matches the previous Frontpage deal (+50).
- Get 1%-5% cash back on deals like this with a cash back credit card. Compare the available cash back credit cards here.
- About this product:
- Integra 5 Year Limited Warranty
Community Voting
Deal Score
+23
Good Deal
Bad Deal
Price Intelligence
Model: Integra DRX 3.4 100W 9.2-Channel 8K Network AV Receiver
Deal HistoryĀ
Deal History includes data from multiple reputable stores, such as Best Buy, Target, and Walmart. The lowest price among stores for a given day is selected as the "Sale Price".
Sale Price does not include sale prices at Amazon unless a deal was posted by a community member.
Sale Price does not include sale prices at Amazon unless a deal was posted by a community member.
Sale Price
- $NaN
- Today
Found by TattyBear
Forum Thread
50% off
Found by Ameen13
Forum Thread
Found by tDames
Forum Thread
24% off
Found by TattyBear
Forum Thread
82% off
Found by pennysave
Forum Thread
39% off
Found by gadgetNerd
Forum Thread
Found by phoinix
Forum Thread
29% off
Top Comments
I upgraded from a Yamaha TSR-700 - it is the Costco rebranded version of the Yamaha RX-V6A. It had YPAO (Yamaha's version for room correction).
I have a 5.1 setup and am driving (2) KEF Q950s for Front L/R, (1) Definitive Technology Mythos Three Center as Center, and (2) KEF Q350s for Surrounds. I also have the system paired with a Klipsch RP-1600SW. The center was by choice for design purposes of the living room furniture layout of the TV stand that the TV is mounted above and was able to fit in a small cubby in the TV stand. This was not the optimal end set up but more on this later, it was done for aesthetics as this was in my living room.
I did room correction with Dirac Live as this was one of the major deciders including the price point that pushed me to upgrade. Dirac Live correction was done on the Laptop - I never did the correction with the phone app, I opted for the laptop since reading everything pointed to better results with a PC. I did this in a quiet environment with all the other devices off so as to ensure fidelity of the measurements. I used a UMIK-1 microphone that is recommended by many forums including our own here at Slickdeals.
I was hesitant and concerned with all the reading about the 2021 PAC AVR "Limp Mode" issue. The KEFs all have a nominal impedance rated at 8ohms and range all the way down to 3.2ohms. It has been noted in other forums that these speakers, although not rated at 4ohms nominal, are harder to drive on some 2021 PAC AVRs and trigger the "Limp Mode". Being hopeful but also to avoid any issues, I installed (2) AC Infinity AIRPLATE S7s (each is fitted with dual 120mm fans - so 4 fans total) into my cabinet that remains closed. One AIRPLATE S7 at the bottom shelf to draw in (intake) cool air and one on the 2nd shelf where the receiver sits to draw out (exhaust). There are only 2 shelf compartments, PS5 and Xbox Series X sit in the bottom compartment with the intake fan. Each AIRPLATE unit at maximum each move 104CFM of air and are controlled by an AC Infinity Controller 2. Fan controller is set at 78F to turn on fans. Measured temps at 80-82F max in the cabinet. I have also matched speaker wire lengths to all relative speakers per position and am using 14 gauge pure copper wire to maintain lower resistance and consistent levels of impedance.
With all that in mindā¦..*drum roll please*ā¦ā¦.
The results are in. After setup and room correction. IT SOUNDS AMAZING. Dirac Live is a game changer, highs are highs but not fatiguing, bass is accurate and deliberate, the center surprisingly not being matched (brand, drivers, complementing crossovers, and timbre matching) sounded seamless. The frequency response was consistent across all volumes and consistent into and past reference level. You don't have drivers overextending themselves and distorting with an inaccurate calibration. Wow. Just wow. Do yourself a favor and get this receiver only if you plan on doing Dirac Live room correction. Also, I recommend with even a trained ear, try the room correction out with any receiver you might have, (hopefully it's Dirac or an equivalent) very few people would be able to correct and calibrate as well as the Dirac did. Too many factors for us to try to consider, room size, room shape, insulation materials, types of surfaces, different objects in the room itself, only to mention a few. The receiver had no issues with driving the KEFs at extended periods at reference levels. Details are more transparent - the KEFs are already good at this, but Dirac Live room correction made it even better. No issues with any "Limp Mode", this may be the fact of adequate cooling in the cabinet.
I am currently waiting on a KEF Q6 Meta to arrive but am nowhere in a rush to replace the center, I just wanted to get the full set for when the time comes to complete it with my wife's permission. I know there will be upsides to the matched center and driver sizes but am very amazed by the seamlessness of the staging accomplished between two very different speakers from Front L/R and center speaker after completing Dirac Live room correction. It could be a commercial. It should be a commercial.
If there are any questions on anything, feel free to ask. I can provide more details to the processes or setup.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!
59 Comments
Sign up for a Slickdeals account to remove this ad.
I called Adorama last week and tried to buy it for this price over the phone. They checked and told me it was not possible anymore. Well, its back. Get it while you can.
https://www.adorama.com/indrx34.h...ail
Any real owners here who can speak about their experience and what they think about this unit?
If you think value in linear, I am not sure this unit can be beat...assuming you are getting what amounts to about an Onkyo RZ50 or 7100 but with a 5 year warranty
Sign up for a Slickdeals account to remove this ad.
I'm in the market this year for a new avr to run a 7 speaker, with plans to run 2 or 4 atmos in the future.
Kef r11 L/R
Kef r2c
Fef r3s for sides
Kef 3005se eggs for rears. (Planning to use 2-4 of these speakers for atmos)
I'm waiting for a deal on Denon X3800/x4800, but given that those are more expensive even on sale, are they worth it to wait for me? I can sacrifice to a 9 speaker system vs 11 but I like to keep things for a long time, my current avr is a marantz sr7007.
Main reason I'm even wanting to upgrade is to get the better room correction and to run all my devices through the avr versus currently running to my lg Oled and using eARC to pass audio back to my avr, using a splitter to extract hd audio.
I guess my question is given that I'm getting hd audio now, but room correction is only Audyssey MultEQ XT, will I notice a difference between audyssey multeq xt vs x32/one/Dirac to warrant a $500-$1000 cost?
Only difference are global crossovers, not sure that's such a big a deal since people often say just set them to 80hz and let your sub pick up the slack.
This is probably the next best thing.
https://slickdeals.net/share/iphone_app/fp/981423
I called Adorama last week and tried to buy it for this price over the phone. They checked and told me it was not possible anymore. Well, its back. Get it while you can.
https://www.adorama.com/indrx34.h...ail
I'm in the market this year for a new avr to run a 7 speaker, with plans to run 2 or 4 atmos in the future.
Kef r11 L/R
Kef r2c
Fef r3s for sides
Kef 3005se eggs for rears. (Planning to use 2-4 of these speakers for atmos)
I'm waiting for a deal on Denon X3800/x4800, but given that those are more expensive even on sale, are they worth it to wait for me? I can sacrifice to a 9 speaker system vs 11 but I like to keep things for a long time, my current avr is a marantz sr7007.
Main reason I'm even wanting to upgrade is to get the better room correction and to run all my devices through the avr versus currently running to my lg Oled and using eARC to pass audio back to my avr, using a splitter to extract hd audio.
I guess my question is given that I'm getting hd audio now, but room correction is only Audyssey MultEQ XT, will I notice a difference between audyssey multeq xt vs x32/one/Dirac to warrant a $500-$1000 cost?
I went from the Marantz flagship pre pro ,at the time, to a Dirac equipped unit and to my ears it was a definite plus/difference over Audyssey XT32
However , based on what you have( and in the future) I would suggest a separate amp with the unit in this thread
That being said ..You might give the Onkyo RZ70 a look
I would not think you would need a separate amp with that unit
I own both the Onkyo RZ50( said to be very similar to the unit in this thread) and the Pioneer LX805...which is said to be a clone of the RZ70.
Substantial difference in the two, in my opinion and ownership
I'm in the market this year for a new avr to run a 7 speaker, with plans to run 2 or 4 atmos in the future.
Kef r11 L/R
Kef r2c
Fef r3s for sides
Kef 3005se eggs for rears. (Planning to use 2-4 of these speakers for atmos)
I'm waiting for a deal on Denon X3800/x4800, but given that those are more expensive even on sale, are they worth it to wait for me? I can sacrifice to a 9 speaker system vs 11 but I like to keep things for a long time, my current avr is a marantz sr7007.
Main reason I'm even wanting to upgrade is to get the better room correction and to run all my devices through the avr versus currently running to my lg Oled and using eARC to pass audio back to my avr, using a splitter to extract hd audio.
I guess my question is given that I'm getting hd audio now, but room correction is only Audyssey MultEQ XT, will I notice a difference between audyssey multeq xt vs x32/one/Dirac to warrant a $500-$1000 cost?
The 3800/4800 would have no issues with this on their own.
Sign up for a Slickdeals account to remove this ad.
Join The Conversation
Share your experience with the Slickdeals community
Share information with the community. Please follow our Community Guidelines and be kind!