Anycubic via Aliexpress has
Anycubic Kobra S1 Combo AE Version Multi-Color 3D Printer for $562 - $100 when you apply promo codes
RDC100B =
$462.
Shipping is free.
Thanks Community Member
gabe23111 for sharing this deal
Note, Price may fluctuate slightly with currency exchange rates. You must be signed into your AliExpress account and have your
address added to add items to your cart and place an order. You may have to manually type in the promo code to apply it at checkout. This item ships from a USA warehouse.
Alternative promo codes available if listed code above is unavailable: AEUS100, USDEAL100, USKUN100
Features:
- Multi-Color Printing: Anycubic ACE PRO supports 4-color printing; pairing two units allows up to 8-color printing, reducing the need for post-print painting.
- Built-In Drying: Integrated filament drying system works continuously, even during printing, for improved efficiency.
- High-Speed Performance: Anycubic Kobra S1 Combo achieves up to 600mm/s print speed with 20,000 mm/s² acceleration—12× faster than standard FDM printers—while maintaining accuracy and detail.
- Flow Correction: Kobra OS automatically adjusts filament extrusion to ensure smoother surfaces, minimize corner overflow, and reduce material waste.
- Remote Control: Anycubic App enables one-click printing from anywhere, supporting multi-plate document parsing for complex projects.
Leave a Comment
Top Comments
I own 2x S1C with 8 color on each. I bought these 2 after much success with Kobra 3 combos. Boy, was I wrong. I SPENT LITERALLY over 100 hours tinkering with this unit, mainly the auto leveling issues that you had. I literally took the entireunit apart including every screw, motherboard, print circuit board, axis, etc. Replaced almost every part of the printer and still had a bad 1st layer.
After some time, I realized it was not the hardware issue but it was a simple flaw in the nozzle wiper. When the nozzle extrudes and goes over the wiper, it does not clean it completely and begins the auto leveling with a bit of filament at the tip. This throws off the leveling and ends upt with a poor 1st layer. This is due to the ptfe style wiper that is used in S1.
As soon as I replaced the wiper with kobra3/A1 style wiper with a filament poop chute plastic, the problem was immediately resolved. Printed almost 500hours+ without any 1st layer issues.
You can thank me now.
22 Comments
Sign up for a Slickdeals account to remove this ad.
Did you contact them for a replacement? They are quick to respond and send the replacement parts right away. 2mm is definitely a hardware defect. They will send you the entire bed.
That sucks as the whole point of this enclosed system is to print TPU/ABS/ASA
Just my advice
Just my advice
Good thing about eBay is the returns are pretty easy as well. We sent ours back because it wouldn't print consistently (you could run the same print three times and two out of three would have some sort of issue)
Like others have mentioned, it's a decent printer but it will take some time. Might not be a good choice if this is your first printer, since it will take a bit of work. But if you know what you're doing and can take the time to relevel the bed, etc it's worth a shot.
Just my advice
That purple Cashback company has also been offering 25% Cashback at AE frequently over the last couple of weeks. I took that route for this deal.
Got it for $338 + tax for a new unit after Cashback.
Leave a Comment